hwVapAntiAttackBroadcastFloodStaRateThreshold

HUAWEI-WLAN-CONFIGURATION-MIB · .1.3.6.1.4.1.2011.6.139.11.1.20.1.42
MIB view Table view

Object

column r/w Unsigned32 
This object indicates the anti-attack braoadcast flood sta-rate-threshold for the VAP. The default value is 10.

Context

MIB
HUAWEI-WLAN-CONFIGURATION-MIB
OID
.1.3.6.1.4.1.2011.6.139.11.1.20.1.42
Type
column
Access
readwrite
Status
current
Parent
hwVapProfileEntry
Table
hwVapProfileTable
Siblings
89

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 5-5000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwVapProfileName
This object indicates the name of a VAP profile. It is the index of the table.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.1
hwVapType
This object indicates the VAP type. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.10
hwVapStaAccessMode
This object indicates the access mode. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.11
hwVapStaAccessModePorfile
This object indicates blacklist and whitelist profiles.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.12
hwVapRoamHomeAgent
This object indicates the tunnel endpoint for inter-Layer 3 roaming. The default value is 1..
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.13
hwVapRoamVlanMobilityGroup
This object indicates the VLAN group for roaming. For the same VLAN, if the VAP is in different VLAN groups for roaming, the roaming is also inter-Layer 3 roaming. The default val…
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.14
hwVapRoamLayer3Switch
This object indicates the status of the Layer 3 roaming function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.15
hwVapBandSteerSwitch
This object indicates the status of the band steering function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.16
hwVapLearnIpv4Address
This object indicates the status of the IPv4 address learning function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.17
hwVapLearnIpv6Address
This object indicates the status of the IPv6 address learning function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.18
hwVapLearnIpv4AddressStrict
This object indicates the status of the strict address learning (only through the DHCP) function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.19
hwVapForwardMode
This object indicates the service forwarding mode. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.2
hwVapIpBindCheck
This object indicates the status of the IP binding relationship check function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.20
hwVapArpBindCheck
This object indicates the status of the ARP binding relationship check function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.21
hwVapOptinon82InsertSwitch
This object indicates the status of the function of appending the Option 82 field to DHCP messages. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.22
hwVapOptinon82InsertRidFormat
This object indicates the format of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.23
hwVapDhcpTrustPort
This object indicates the status of the radio interface DHCP trust function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.24
hwVapNdTrustPort
This object indicates the status of the radio interface ND trust function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.25
hwVapSecurityProfile
The object indicates the security profile that is bound to the VAP. The default value is default.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.26
hwVapTrafficProfile
The object indicates the traffic profile that is bound to the VAP. The default value is default.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.27
hwVapSsidProfile
The object indicates the SSID profile that is bound to the VAP. The default value is default.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.28
hwVapAuthenticationProfile
The object indicates the authentication profile that is bound to the VAP. The default value is default.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.29
hwVapTunnelForwardProtocol
This object indicates the format of packets forwarded by tunnel. The default value is 0xd.? bit0: dot1x? bit1: dhcp? bit2: http? bit3: wapi? bit4: mdns.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.3
hwVapSacProfile
The object indicates the SAC profile that is bound to the VAP.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.30
hwVapProfileRowStatus
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROW…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.6.139.11.1.20.1.31
hwVapUserProfile
The object indicates the user profile that is bound to the VAP.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.32
hwVapHotspot2Profile
The object indicates the Hotspot2.0 profile that is bound to the VAP.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.33
hwSoftgreProfile
The object indicates the Softgre profile that is bound to the VAP.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.34
hwVapOptinon82RidUserDefined
This object indicates the user-defined format of remote-id(RID) in the Option 82 field to DHCP messages.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.35
hwVapOptinon82RidMacFormat
This object indicates the AP MAC address format of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 0.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.36
hwVapOptinon82InsertCidFormat
This object indicates the format of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.37
hwVapOptinon82CidUserDefined
This object indicates the user-defined format of circuit-id(CID) in the Option 82 field to DHCP messages.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.38
hwVapOptinon82CidMacFormat
This object indicates the AP MAC address format of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 0.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.39
hwVapServiceSwitch
This object indicates the status of the VAP service function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.4
hwVapUccProfile
The object indicates the UCC profile that is bound to the VAP.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.40
hwVapAntiAttackBroadcastFloodSwitch
This object indicates the status of the VAP anti-attack braoadcast flood function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.41
hwVapAntiAttackBroadcastFloodBlacklistSwitch
This object indicates the status of the VAP anti-attack braoadcast flood blacklist function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.43
hwVapLearnIpv6AddressStrict
This object indicates the status of the strict address learning (only through the DHCPv6) function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.44
hwVapAntiAttackARPFloodSwitch
This object indicates the status of the VAP anti-attack ARP flood function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.45
hwVapAntiAttackARPFloodStaRateThreshold
This object indicates the anti-attack ARP flood sta-rate-threshold for the VAP. The default value is 5.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.46
hwVapAntiAttackARPFloodBlacklistSwitch
This object indicates the status of the VAP anti-attack ARP flood blacklist function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.47
hwVapAntiAttackNDFloodSwitch
This object indicates the status of the VAP anti-attack ND flood function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.48
hwVapAntiAttackNDFloodStaRateThreshold
This object indicates the anti-attack ND flood sta-rate-threshold for the VAP. The default value is 16.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.49
hwVapAutoOffStartTime
This object indicates the start time of VAP profile. The format is HH:MM:SS.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.5
hwVapAntiAttackNDFloodBlacklistSwitch
This object indicates the status of the VAP anti-attack ND flood blacklist function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.50
hwVapAntiAttackIGMPFloodSwitch
This object indicates the status of the VAP anti-attack IGMP flood function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.51
hwVapAntiAttackIGMPFloodStaRateThreshold
This object indicates the anti-attack IGMP flood sta-rate-threshold for the VAP. The default value is 4.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.52
hwVapAntiAttackIGMPFloodBlacklistSwitch
This object indicates the status of the VAP anti-attack IGMP flood blacklist function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.53
hwVapDefenceProfile
The object indicates the Defence profile that is bound to the VAP.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.54
hwVapTimeRange
The object indicates the TimeRange .
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.55
hwVapPermitVlanList
This object indicates the PermitVlanList. The default value is 0.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.56
hwVapSfnRoamSwitch
This object indicates the status of the SFN Roam function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.57
hwVapStaNetworkDetectSwitch
This object indicates the status of sta network reachable detect function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.58
hwVapLearnIpv4AddressIpconflictuncheck
This object indicates the status of the IPv4 address conflict check function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.59
hwVapAutoOffEndTime
This object indicates the end time of VAP profile. The format is HH:MM:SS.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.6
hwVapLearnIpv6AddressIpconflictuncheck
This object indicates the status of the IPv6 address conflict check function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.60
hwVapRadiusTemplate
This object indicates the name of radius-server template.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.61
hwVapBackUpState
This object indicates the state of the radiusdownBackup vap.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.62
hwVapBackUpMode
This object indicates the mode of the switch which triges vap on or off.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.63
hwVapRadiusState
This object indicates the state of radius server.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.64
hwVapKeepServiceSwitch
This object indicates the status of vap keep service function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.65
hwVapNaviACID
This object indicates the AC index.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.66
hwVapNaviACWlanId
This object indicates the wlan index.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.67
hwVapHighwayEnable
This object indicates the status of vap highway status. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.68
hwVapServiceExpAnalysisSwitch
This object indicates the status of service experience analysis. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.69
hwVapTemporaryManagementSwitch
If this parameter is set to 2, the VAP automatically becomes the management VAP for offline APs after the AP is disconnected. It can still send signals so that maintenance personn…
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.7
hwVapServiceExpAnalysisSnoopingPort
This object indicates SIP snooping port. The default value is 5060.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.70
hwVapAutonavigationRoamOptimizeSwitch
This object indicates whether to enable autonavigation roaming optimization.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.71
hwVapMdnsPolicyLocalACSwitch
This object indicates the status of vap MDNS policy on local ac. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.72
hwVapProfileMdnsSnooping
This object indicates the switch of MDNS snooping. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.73
hwVapSplitTunnelAcl
This object indicates configure of split tunnel ACL. The default value is 65535.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.74
hwVapSplitTunnelAclIPv6
This object indicates configure of split tunnel IPv6 ACL. The default value is 65535.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.75
hwVapApZoneName
This object indicates the zone name of vap.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.76
hwVapRadio
This object indicates the radio that vap takes effect. The default value is 0.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.77
hwVapProfileMuBaTriggerMode
This object indicates the trigger mode of sending MU-BA. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.78
hwVapProfileDynamicFlowInspection
This object indicates the switch of dynamic flow inspection. The default value is 3.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.79
hwVapServiceVlan
This object indicates the service VLAN for the VAP. The default value is 1.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.20.1.8
hwVapiConnectSwitch
This object indicates the switch of iconnect. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.80
hwVapOptinon82RidPattern
This object indicates the pattern of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.81
hwVapOptinon82CidPattern
This object indicates the pattern of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.82
hwVapCPETunnelProfile
The object indicates the CPE-Tunnel profile that is bound to the VAP.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.83
hwVapProfileDnsSnooping
This object indicates the switch of DNS snooping. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.84
hwVapNaviSeviceVlanCheckSwitch
This object indicates the switch of navi service vlan. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.85
hwVapLearnAddressDhcpv6Slaac
This object indicates the status of the strict address learning (through the DHCPv6 SLAAC) function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.86
hwVapSIpFpmClearColorFlag
This object indicates the switch of sipfpm clear color-flag. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.87
hwVapUserFlowSyslogSwitch
This object indicates the switch of user flow syslog. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.88
hwVapTrackInterfaceName
The object indicates the VE interface name that is bound to the VAP.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.89
hwVapVlanPool
This object indicates the VLAN pool to which the VAP is bound.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.20.1.9
hwVapiConnectParseUrlSwitch
This object indicates the switch of iconnect parsing url. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.20.1.90