hwRrmSmartRoamSnrCheckInterval
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.18.1.28
Object
column
r/w
Unsigned32
This object indicates the terminal SNR detection interval for smart roaming. The default value is 3. It is expressed in s.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.18.1.28- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwRrmProfileEntry
- Table
- hwRrmProfileTable
- Siblings
- 97
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 3-30
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwRrmProfileName This object indicates the name of the RRM profile. It is the index of the table. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.18.1.1 |
| hwRrmUacPolicyType This object indicates the UAC policy. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.10 |
| hwRrmUacClientNumAccessThreshold This object indicates the user CAC access threshold based on the number of users. If the number of online users reaches the threshold after a new user goes online, the AP will rej… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.11 |
| hwRrmUacClientNumRoamThreshold This object indicates the user CAC roaming threshold based on the number of users. When a user roams to an AP, the AP checks whether the current number of online users reaches the… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.12 |
| hwRrmUacReachThresholdHideSsidSwitch This object indicates the disposal method when the value of UAC reaches the specified threshold. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.13 |
| hwRrmBandSteerDenyThreshold This object indicates the maximum number of times the band steering function rejects association requests from terminals. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.14 |
| hwRrmBandSteerLbClientThreshold This object indicates the minimum number of terminals for triggering inter-band load balancing. The default value is 100. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.15 |
| hwRrmBandSteerLbGapThreshold This object indicates the percentage threshold for access STAs on the 5 GHz radio. The default value is 90. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.16 |
| hwRrmBandSteerClientBandsExpire This object indicates the expiration condition for records of terminal supported bands. If the AP continuously receives probe messages from a terminal on the same band and the num… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.17 |
| hwRrmLoadBalanceSwitch This object indicates the status of the load balancing group function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.18 |
| hwRrmLoadBalanceClientThreshold This object indicates the percentage of terminals for triggering load balancing. The default value is 10. It is expressed in percentage. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.19 |
| hwRrmAutoChannelSelectSwitch This object indicates the status of the automatic channel selection function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.2 |
| hwRrmLoadBalanceGapThreshold This object indicates the load difference threshold for triggering load balancing, which is expressed in the number of terminals. The default value is 10. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.20 |
| hwRrmLoadBalanceDenyThreshold This object indicates the maximum number of times the load balancing function rejects association requests from terminals. The default value is 3. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.21 |
| hwRrmSmartRoamCheckType This object indicates whether STA active roaming is triggered by rate check or SNR check.The values are as follows:? 1: checkSnr? 2: checkRate? 3: checkAll. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.22 |
| hwRrmSmartRoamSwitch This object indicates the status of the smart roaming function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.23 |
| hwRrmSmartRoamSnrThreshold This object indicates the SNR threshold for triggering the smart roaming function. The default value is 20 dB. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.24 |
| hwRrmSmartRoamRateThreshold This object indicates the rate threshold for triggering the smart roaming function. It is expressed in the percentage against the maximum rate supported by the terminal. The defau… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.25 |
| hwRrmSmartRoamSnrHighLevelMargin This object indicates the upper SNR difference threshold for triggering smart roaming. The default value is 15. It is expressed in dB. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.26 |
| hwRrmSmartRoamSnrLowLevelMargin This object indicates the lower SNR difference threshold for triggering smart roaming. The default value is 10. It is expressed in dB. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.27 |
| hwRrmSmartRoamUnableRoamExpireTime This object indicates the aging time of records that terminals are unable to roam. The default value is 30. It is expressed in minutes. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.29 |
| hwRrmAutoTxPowerSelectSwitch This object indicates the status of the automatic power selection function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.3 |
| hwRrmProfileRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.18.1.30 |
| hwRrmUacChannelUtiAccessThreshold This object indicates the user CAC access threshold based on the channel utilization. If the channel utilization reaches the threshold after a new user goes online, the AP will re… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.31 |
| hwRrmUacChannelUtiRoamThreshold This object indicates the user CAC roaming threshold based on the channel utilization. When a user roams to an AP, the AP checks whether the current channel utilization reaches th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.32 |
| hwRrmSmartRoamQuickKickoffRateThr Smart roam quick-kickoff rate threshold | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.33 |
| hwRrmSmartRoamQuickKickoffSnrThr Smart roam quick-kickoff SNR threshold | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.34 |
| hwRrmBandSteerSNRThreshold This object indicates the start SNR threshold for triggering 5G-prior access. The default value is 20, in dB. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.35 |
| hwRrmLoadBalanceMode This object indicates the mode for load balancing in a static load balancing group. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.36 |
| hwRrmLoadBalanceChUtilGapThreshold This object indicates the load difference threshold of a static load balancing group in channel-utilization mode. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.37 |
| hwRrmLoadBalanceChUtilStartThreshold This object indicates the start threshold for load balancing in a static load balancing group in channel-utilization mode. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.38 |
| hwRrmCalibrateCoverageThr Calibrate TPC coverage threshold. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.39 |
| hwRrmErrRateThreshold This object indicate the error packet threshold triggering the automatic channel or power selection function. The default value is 60. It is expressed in percentage. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.4 |
| hwRrmCalibrateMaxTxPwr Calibrate maximum TX power. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.40 |
| hwRrmCalibrateMinTxPwr Calibrate minimum TX power. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.41 |
| hwRrmCalibrateNoiseFloorThr Calibrate nose-floor threshold. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.42 |
| hwRrmDFSSmartSelectionSwitch This object indicates whether DFS smart selection is enabled. By default, this function is enabled. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.43 |
| hwRrmDFSRecoverDelayTime This object indicates the delay in switching back the DFS channel. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.44 |
| hwRrmSmartRoamQuickKickoffSNRCheckInterval This object indicates the interval for checking the SNR to determine whether to quickly disconnect STAs. The default value is 500, in milliseconds. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.45 |
| hwRrmSmartRoamQuickKickoffSNRPNObserveTime Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.46 |
| hwRrmSmartRoamQuickKickoffSNRPNQualifyTime Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.47 |
| hwRrmErrRateCheckInterval Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.48 |
| hwRrmErrRateCheckTrafficThreshold Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.49 |
| hwRrmAirtimeFairSchduleSwitch This object indicates the status of the airtime scheduling function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.5 |
| hwRrmLoadBalanceRssiThreshold This object indicates the load balance rssi threshold. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.50 |
| hwSfnRoamCheckHighThreshold This object indicates sfn roam check high-threshold . | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.51 |
| hwSfnRoamCheckLowThreshold This object indicates sfn roam check low-threshold . | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.52 |
| hwSfnRoamCheckRssiAccumulateThreshold This object indicates sfn roam check cumulative RSSI change threshold . | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.53 |
| hwSfnRoamCheckStaHoldingTimes This object indicates sfn roam check Sta HoldingTimes . | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.54 |
| hwSfnRoamCheckGapRssiThreshold This object indicates sfn roam check gap rssi Threshold. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.55 |
| hwSfnRoamCheckBetterSnrTimes This object indicates sfn roam check Better Snr Times. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.56 |
| hwSfnRoamCheckInterval This object indicates sfn roam check Decision Interval . | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.57 |
| hwSfnRoamReportInterval This object indicates sfn roam check Snr Report Interval | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.58 |
| hwRrmMultimediaAirOptimize This object indicates multimedia optimized edca. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.59 |
| hwRrmDynamicEdcaSwitch This object indicates the status of the dynamic EDCA parameter adjustment function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.6 |
| hwRrmHighDensityAmcOptimizeSwitch This object indicates high density AMC optimize switch. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.60 |
| hwRrmMultimediaOptimizedThresholdVoice This object indicates multimedia optimized edca adaptive voice threshold. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.61 |
| hwRrmMultimediaOptimizedThresholdVideo This object indicates multimedia optimized edca adaptive video threshold. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.62 |
| hwRrmSmartRoamQuickKickoffSwitch This object the status of the smart roam quick-kickoff function. The default value is 2 except the Fat AP. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.63 |
| hwRrmSmartRoamQuickKickoffCheckType This object indicates the check mode for determining whether to quickly disconnect STAs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.64 |
| hwRrmLoadBalanceGapStaNumThreshold This object indicates the load difference threshold for triggering dynamic load balancing based on the number of STAs. The value 0 indicates that load balancing is based on the pe… | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.65 |
| hwRrmLbProbeReportInterval This object indicates the interval for reporting Probe frames. The default value is 120, in seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.66 |
| hwRrmLbDeauthFailTime This object indicates the number of attempts to steer STAs in Deauthentication mode. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.67 |
| hwRrmLbBtmFailTime This object indicates the number of attempts to steer STAs in BTM mode. The default value is 5. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.68 |
| hwRrmLbSteerRestrictTime This object indicates the time for suppressing STA association with non-target APs during STA steering. The default value is 5, in seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.69 |
| hwRrmUacLimitClientSnrSwitch This object indicates the status of the rejecting access from terminals with weak signals function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.7 |
| hwRrmLbSteerProbeRestrictThreshold This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 5. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.70 |
| hwRrmLbSteerAuthRestrictThreshold This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.71 |
| hwRrmLbRssiDiffGap This object indicates the threshold of the RSSI gap between the associated radio and target radio. The default value is 5, in dB.. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.72 |
| hwRrmSmartRoamAdvancedScan This object indicates the switch of advanced scan. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.73 |
| hwRrmSmartRoamQuickKickoffBackOffTime This object indicates the back-off time of kick off. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.74 |
| hwRrmDynamicEdcaThresholdBE This object indicates the restrict threshold of edca. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.75 |
| hwRrmCalibrate5gMaxTxPwr Calibrate 5g maximum TX power. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.76 |
| hwRrmCalibrate5gMinTxPwr Calibrate 5g minimum TX power. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.77 |
| hwRrmTpcRequestSwitch This object indicates the status of the tpc request function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.78 |
| hwRrmLinkMeasurementSwitch This object indicates the status of the link measurement function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.79 |
| hwRrmUacClientSnrThreshold This object indicates the SNR threshold for rejecting access from terminals. The default value is 15(from V2R8C10; The default value is 20 before V2R8C10.). The value ranges from … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.8 |
| hwRrmInterferenceImmuneSwitch This object indicates the status of the interference immune function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.80 |
| hwRrmBssColorSwitch This object indicates the status of the bss color function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.81 |
| hwRrmSpatialReuseSwitch This object indicates the status of the spatial reuse function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.82 |
| hwRrmAntennaModeSwitch This object indicates the status of the antenna mode switch function. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.83 |
| hwRrmCoordinationSpatialReuseSwitch This object indicates the status of the coordination spatial reuse function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.84 |
| hwRrmCalibrate6gMaxTxPwr Calibrate 6G maximum TX power. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.85 |
| hwRrmCalibrate6gMinTxPwr Calibrate 6G minimum TX power. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.86 |
| hwRrmMultimediaOptimizedDLSliceRatioVoice This object indicates multimedia optimized downlink slice ratio voice value. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.87 |
| hwRrmMultimediaOptimizedDLSliceRatioVideo This object indicates multimedia optimized downlink slice ratio video value. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.88 |
| hwRrmMultimediaOptimizedDLDelayGuarVoice This object indicates multimedia optimized downlink delay guarantee voice value. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.89 |
| hwRrmUacPolicySwitch This object indicates the status of the UAC policy function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.9 |
| hwRrmMultimediaOptimizedDLDelayGuarVideo This object indicates multimedia optimized downlink delay guarantee video value. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.90 |
| hwRrmMultimediaOptimizedTcpWinTuningSwitch This object indicates multimedia optimized congestion control tcp window tuning. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.91 |
| hwRrmMultimediaOptDLSliceRatioVoiceCustom This object indicates multimedia optimized downlink slice ratio for voice traffic. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.92 |
| hwRrmMultimediaOptDLSliceRatioVideoCustom This object indicates multimedia optimized downlink slice ratio for video traffic. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.93 |
| hwRrmWlanSliceEnable This object indicates the wlan high-reliability slice enable status. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.94 |
| hwRrmWlanSliceRtt This object indicates the except max-RTT. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.95 |
| hwRrmWlanSliceTimeRatio This object indicates the wlan high-reliability slice time ratio. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.96 |
| hwRrmCoSrEnable This object indicates CO SR function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.18.1.97 |
| hwRrmCalibrateGroupingInterThr This object indicates the calibrate grouping interfere threshold, default is -127. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.18.1.98 |