hwRrmSmartRoamQuickKickoffSnrThr

HUAWEI-WLAN-CONFIGURATION-MIB · .1.3.6.1.4.1.2011.6.139.11.1.18.1.34
MIB view Table view

Object

column r/w Unsigned32 
Smart roam quick-kickoff SNR threshold

Context

MIB
HUAWEI-WLAN-CONFIGURATION-MIB
OID
.1.3.6.1.4.1.2011.6.139.11.1.18.1.34
Type
column
Access
readwrite
Status
current
Parent
hwRrmProfileEntry
Table
hwRrmProfileTable
Siblings
97

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 5-45

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwRrmProfileName
This object indicates the name of the RRM profile. It is the index of the table.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.18.1.1
hwRrmUacPolicyType
This object indicates the UAC policy. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.10
hwRrmUacClientNumAccessThreshold
This object indicates the user CAC access threshold based on the number of users. If the number of online users reaches the threshold after a new user goes online, the AP will rej…
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.11
hwRrmUacClientNumRoamThreshold
This object indicates the user CAC roaming threshold based on the number of users. When a user roams to an AP, the AP checks whether the current number of online users reaches the…
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.12
hwRrmUacReachThresholdHideSsidSwitch
This object indicates the disposal method when the value of UAC reaches the specified threshold. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.13
hwRrmBandSteerDenyThreshold
This object indicates the maximum number of times the band steering function rejects association requests from terminals. The default value is 0.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.14
hwRrmBandSteerLbClientThreshold
This object indicates the minimum number of terminals for triggering inter-band load balancing. The default value is 100.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.15
hwRrmBandSteerLbGapThreshold
This object indicates the percentage threshold for access STAs on the 5 GHz radio. The default value is 90.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.16
hwRrmBandSteerClientBandsExpire
This object indicates the expiration condition for records of terminal supported bands. If the AP continuously receives probe messages from a terminal on the same band and the num…
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.17
hwRrmLoadBalanceSwitch
This object indicates the status of the load balancing group function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.18
hwRrmLoadBalanceClientThreshold
This object indicates the percentage of terminals for triggering load balancing. The default value is 10. It is expressed in percentage.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.19
hwRrmAutoChannelSelectSwitch
This object indicates the status of the automatic channel selection function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.2
hwRrmLoadBalanceGapThreshold
This object indicates the load difference threshold for triggering load balancing, which is expressed in the number of terminals. The default value is 10.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.20
hwRrmLoadBalanceDenyThreshold
This object indicates the maximum number of times the load balancing function rejects association requests from terminals. The default value is 3.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.21
hwRrmSmartRoamCheckType
This object indicates whether STA active roaming is triggered by rate check or SNR check.The values are as follows:? 1: checkSnr? 2: checkRate? 3: checkAll.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.22
hwRrmSmartRoamSwitch
This object indicates the status of the smart roaming function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.23
hwRrmSmartRoamSnrThreshold
This object indicates the SNR threshold for triggering the smart roaming function. The default value is 20 dB.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.24
hwRrmSmartRoamRateThreshold
This object indicates the rate threshold for triggering the smart roaming function. It is expressed in the percentage against the maximum rate supported by the terminal. The defau…
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.25
hwRrmSmartRoamSnrHighLevelMargin
This object indicates the upper SNR difference threshold for triggering smart roaming. The default value is 15. It is expressed in dB.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.26
hwRrmSmartRoamSnrLowLevelMargin
This object indicates the lower SNR difference threshold for triggering smart roaming. The default value is 10. It is expressed in dB.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.27
hwRrmSmartRoamSnrCheckInterval
This object indicates the terminal SNR detection interval for smart roaming. The default value is 3. It is expressed in s.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.28
hwRrmSmartRoamUnableRoamExpireTime
This object indicates the aging time of records that terminals are unable to roam. The default value is 30. It is expressed in minutes.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.29
hwRrmAutoTxPowerSelectSwitch
This object indicates the status of the automatic power selection function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.3
hwRrmProfileRowStatus
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.6.139.11.1.18.1.30
hwRrmUacChannelUtiAccessThreshold
This object indicates the user CAC access threshold based on the channel utilization. If the channel utilization reaches the threshold after a new user goes online, the AP will re…
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.31
hwRrmUacChannelUtiRoamThreshold
This object indicates the user CAC roaming threshold based on the channel utilization. When a user roams to an AP, the AP checks whether the current channel utilization reaches th…
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.32
hwRrmSmartRoamQuickKickoffRateThr
Smart roam quick-kickoff rate threshold
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.33
hwRrmBandSteerSNRThreshold
This object indicates the start SNR threshold for triggering 5G-prior access. The default value is 20, in dB.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.35
hwRrmLoadBalanceMode
This object indicates the mode for load balancing in a static load balancing group.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.36
hwRrmLoadBalanceChUtilGapThreshold
This object indicates the load difference threshold of a static load balancing group in channel-utilization mode.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.37
hwRrmLoadBalanceChUtilStartThreshold
This object indicates the start threshold for load balancing in a static load balancing group in channel-utilization mode.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.38
hwRrmCalibrateCoverageThr
Calibrate TPC coverage threshold.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.39
hwRrmErrRateThreshold
This object indicate the error packet threshold triggering the automatic channel or power selection function. The default value is 60. It is expressed in percentage.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.4
hwRrmCalibrateMaxTxPwr
Calibrate maximum TX power.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.40
hwRrmCalibrateMinTxPwr
Calibrate minimum TX power.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.41
hwRrmCalibrateNoiseFloorThr
Calibrate nose-floor threshold.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.42
hwRrmDFSSmartSelectionSwitch
This object indicates whether DFS smart selection is enabled. By default, this function is enabled.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.43
hwRrmDFSRecoverDelayTime
This object indicates the delay in switching back the DFS channel.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.44
hwRrmSmartRoamQuickKickoffSNRCheckInterval
This object indicates the interval for checking the SNR to determine whether to quickly disconnect STAs. The default value is 500, in milliseconds.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.45
hwRrmSmartRoamQuickKickoffSNRPNObserveTime
Description.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.46
hwRrmSmartRoamQuickKickoffSNRPNQualifyTime
Description.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.47
hwRrmErrRateCheckInterval
Description.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.48
hwRrmErrRateCheckTrafficThreshold
Description.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.49
hwRrmAirtimeFairSchduleSwitch
This object indicates the status of the airtime scheduling function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.5
hwRrmLoadBalanceRssiThreshold
This object indicates the load balance rssi threshold.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.50
hwSfnRoamCheckHighThreshold
This object indicates sfn roam check high-threshold .
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.51
hwSfnRoamCheckLowThreshold
This object indicates sfn roam check low-threshold .
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.52
hwSfnRoamCheckRssiAccumulateThreshold
This object indicates sfn roam check cumulative RSSI change threshold .
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.53
hwSfnRoamCheckStaHoldingTimes
This object indicates sfn roam check Sta HoldingTimes .
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.54
hwSfnRoamCheckGapRssiThreshold
This object indicates sfn roam check gap rssi Threshold.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.55
hwSfnRoamCheckBetterSnrTimes
This object indicates sfn roam check Better Snr Times.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.56
hwSfnRoamCheckInterval
This object indicates sfn roam check Decision Interval .
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.57
hwSfnRoamReportInterval
This object indicates sfn roam check Snr Report Interval
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.58
hwRrmMultimediaAirOptimize
This object indicates multimedia optimized edca.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.59
hwRrmDynamicEdcaSwitch
This object indicates the status of the dynamic EDCA parameter adjustment function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.6
hwRrmHighDensityAmcOptimizeSwitch
This object indicates high density AMC optimize switch.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.60
hwRrmMultimediaOptimizedThresholdVoice
This object indicates multimedia optimized edca adaptive voice threshold.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.61
hwRrmMultimediaOptimizedThresholdVideo
This object indicates multimedia optimized edca adaptive video threshold.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.62
hwRrmSmartRoamQuickKickoffSwitch
This object the status of the smart roam quick-kickoff function. The default value is 2 except the Fat AP.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.63
hwRrmSmartRoamQuickKickoffCheckType
This object indicates the check mode for determining whether to quickly disconnect STAs. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.64
hwRrmLoadBalanceGapStaNumThreshold
This object indicates the load difference threshold for triggering dynamic load balancing based on the number of STAs. The value 0 indicates that load balancing is based on the pe…
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.65
hwRrmLbProbeReportInterval
This object indicates the interval for reporting Probe frames. The default value is 120, in seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.66
hwRrmLbDeauthFailTime
This object indicates the number of attempts to steer STAs in Deauthentication mode. The default value is 0.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.67
hwRrmLbBtmFailTime
This object indicates the number of attempts to steer STAs in BTM mode. The default value is 5.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.68
hwRrmLbSteerRestrictTime
This object indicates the time for suppressing STA association with non-target APs during STA steering. The default value is 5, in seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.69
hwRrmUacLimitClientSnrSwitch
This object indicates the status of the rejecting access from terminals with weak signals function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.7
hwRrmLbSteerProbeRestrictThreshold
This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 5.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.70
hwRrmLbSteerAuthRestrictThreshold
This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 0.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.71
hwRrmLbRssiDiffGap
This object indicates the threshold of the RSSI gap between the associated radio and target radio. The default value is 5, in dB..
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.72
hwRrmSmartRoamAdvancedScan
This object indicates the switch of advanced scan.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.73
hwRrmSmartRoamQuickKickoffBackOffTime
This object indicates the back-off time of kick off.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.74
hwRrmDynamicEdcaThresholdBE
This object indicates the restrict threshold of edca.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.75
hwRrmCalibrate5gMaxTxPwr
Calibrate 5g maximum TX power.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.76
hwRrmCalibrate5gMinTxPwr
Calibrate 5g minimum TX power.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.77
hwRrmTpcRequestSwitch
This object indicates the status of the tpc request function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.78
hwRrmLinkMeasurementSwitch
This object indicates the status of the link measurement function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.79
hwRrmUacClientSnrThreshold
This object indicates the SNR threshold for rejecting access from terminals. The default value is 15(from V2R8C10; The default value is 20 before V2R8C10.). The value ranges from …
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.8
hwRrmInterferenceImmuneSwitch
This object indicates the status of the interference immune function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.80
hwRrmBssColorSwitch
This object indicates the status of the bss color function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.81
hwRrmSpatialReuseSwitch
This object indicates the status of the spatial reuse function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.82
hwRrmAntennaModeSwitch
This object indicates the status of the antenna mode switch function.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.83
hwRrmCoordinationSpatialReuseSwitch
This object indicates the status of the coordination spatial reuse function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.84
hwRrmCalibrate6gMaxTxPwr
Calibrate 6G maximum TX power.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.85
hwRrmCalibrate6gMinTxPwr
Calibrate 6G minimum TX power.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.86
hwRrmMultimediaOptimizedDLSliceRatioVoice
This object indicates multimedia optimized downlink slice ratio voice value. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.87
hwRrmMultimediaOptimizedDLSliceRatioVideo
This object indicates multimedia optimized downlink slice ratio video value. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.88
hwRrmMultimediaOptimizedDLDelayGuarVoice
This object indicates multimedia optimized downlink delay guarantee voice value. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.89
hwRrmUacPolicySwitch
This object indicates the status of the UAC policy function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.9
hwRrmMultimediaOptimizedDLDelayGuarVideo
This object indicates multimedia optimized downlink delay guarantee video value. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.90
hwRrmMultimediaOptimizedTcpWinTuningSwitch
This object indicates multimedia optimized congestion control tcp window tuning. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.91
hwRrmMultimediaOptDLSliceRatioVoiceCustom
This object indicates multimedia optimized downlink slice ratio for voice traffic.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.92
hwRrmMultimediaOptDLSliceRatioVideoCustom
This object indicates multimedia optimized downlink slice ratio for video traffic.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.93
hwRrmWlanSliceEnable
This object indicates the wlan high-reliability slice enable status.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.94
hwRrmWlanSliceRtt
This object indicates the except max-RTT.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.95
hwRrmWlanSliceTimeRatio
This object indicates the wlan high-reliability slice time ratio.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.18.1.96
hwRrmCoSrEnable
This object indicates CO SR function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.18.1.97
hwRrmCalibrateGroupingInterThr
This object indicates the calibrate grouping interfere threshold, default is -127.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.18.1.98