hwIDIndexedAPSpWdsWhitelistProfile
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.71.1.8
Object
column
r/w
OctetString
This object indicates the bound whitelist profile.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.71.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwIDIndexedAPSpecificRadioEntry
- Table
- hwIDIndexedAPSpecificRadioTable
- Siblings
- 38
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-35
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIDIndexedAPSpRadio This object indicates the radio ID. It is the index of the table. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.71.1.1 |
| hwIDIndexedAPSpRadioChannel This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.71.1.10 |
| hwIDIndexedAPSpRadioBandwidth This object indicate a bandwidth. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.11 |
| hwIDIndexedAPSpRadioEirp This object indicates a power value. The default value is 127(from V2R8C10; The default value is 255 before V2R8C10.). The configuration is saved but the actual power is determine… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.71.1.12 |
| hwIDIndexedAPSpRadioAntennaGain This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.71.1.13 |
| hwIDIndexedAPSpRadioCoverageDistance This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.71.1.14 |
| hwIDIndexedAPSpRadioWorkMode This object indicates the radio working mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.15 |
| hwIDIndexedAPSpRadioFrequency This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G, 3: frequency6G. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.16 |
| hwIDIndexedAPSpSpectrumAnalysisSwitch This object indicates the status of the spectrum analysis function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.17 |
| hwIDIndexedAPSpWidsDeviceDetectSwitch This object indicates the status of the device detection function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.18 |
| hwIDIndexedAPSpWidsAttackDetectEnBmp obsolete This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.71.1.19 |
| hwIDIndexedAPSp5gRadioProfile This object indicates the bound 5G radio profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.71.1.2 |
| hwIDIndexedAPSpWidsRogueContainSwitch This object indicates the status of the device detection function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.20 |
| hwIDIndexedAPSpRadioRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.71.1.21 |
| hwIDIndexedAPSpRadioSecondChannel This object indicates a second radio-frequency channel.The value ranges from 42,58,106,122,138,155. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.71.1.22 |
| hwIDIndexedAPSpAutoChannelSelectSwitch This object indicates the status of the automatic channel selection function. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.23 |
| hwIDIndexedAPSpAutoTxPowerSelectSwitch This object indicates the status of the automatic power selection function. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.24 |
| hwIDIndexedAPSpSfnRoamCtsSwitch This object indicates the status of Cts Switch. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.25 |
| hwIDIndexedAPSpSfnRoamBeaconSwitch This object indicates the status of Beacon Switch. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.26 |
| hwIDIndexedAPSpSfnRoamCtsDelay This object indicates Cts Delay time. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.71.1.27 |
| hwIDIndexedAPSpRadioCalibrateFlexibleRadio This object indicates the status of calibrate flexible-radio. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.28 |
| hwIDIndexedAPSpAutoBandwidthSelectSwitch This object indicates the status of the automatic bandwidth selection function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.29 |
| hwIDIndexedAPSpMeshProfile This object indicates the bound Mesh profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.71.1.3 |
| hwIDIndexedAPSpReferenceDataAnalysis This object indicates the status of the referencing data-analysis function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.30 |
| hwIDIndexedAPSpWidsAttackDetectWeakIv This object indicates weak IV attack detection. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.31 |
| hwIDIndexedAPSpWidsAttackDetectSpoof This object indicates spoofing attack detection. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.32 |
| hwIDIndexedAPSpWidsAttackDetectFlood This object indicates flood attack detection. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.33 |
| hwIDIndexedAPSpWidsAttackDetectWpaPsk This object indicates brute force attack detection in WPA-PSK authentication. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.34 |
| hwIDIndexedAPSpWidsAttackDetectWpa2Psk This object indicates brute force attack detection in WPA2-PSK authentication. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.35 |
| hwIDIndexedAPSpWidsAttackDetectWapiPsk This object indicates brute force attack detection in WAPI-PSK authentication. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.36 |
| hwIDIndexedAPSpWidsAttackDetectWepShareKey This object indicates brute force attack detection in WEP shared key authentication. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.37 |
| hwIDIndexedAPSpChannelMonitorSwitch This object indicates the status of the channel monitor function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.38 |
| hwIDIndexedAPSpReference3dData This object indicates the status of the referencing 3d-data function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.39 |
| hwIDIndexedAPSpWdsProfile This object indicates the bound WDS profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.71.1.4 |
| hwIDIndexedAPSpLocationProfile This object indicates the bound location profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.71.1.5 |
| hwIDIndexedAPSpRadio2gProfile This object indicates the system profile to which AP groups are bound. The default value is default. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.71.1.6 |
| hwIDIndexedAPSpMeshWhitelistProfile This object indicates the bound whitelist profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.71.1.7 |
| hwIDIndexedAPSpRadioSwitch This object indicates the name of a 2G radio profile. It is the index of the table. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.71.1.9 |