hwIDIndexedAPSpRadioCoverageDistance

HUAWEI-WLAN-CONFIGURATION-MIB · .1.3.6.1.4.1.2011.6.139.11.1.71.1.14
MIB view Table view

Object

column r/w Unsigned32 
This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.

Context

MIB
HUAWEI-WLAN-CONFIGURATION-MIB
OID
.1.3.6.1.4.1.2011.6.139.11.1.71.1.14
Type
column
Access
readwrite
Status
current
Parent
hwIDIndexedAPSpecificRadioEntry
Table
hwIDIndexedAPSpecificRadioTable
Siblings
38

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 1-400 range: 65535-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwIDIndexedAPSpRadio
This object indicates the radio ID. It is the index of the table.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.71.1.1
hwIDIndexedAPSpRadioChannel
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.71.1.10
hwIDIndexedAPSpRadioBandwidth
This object indicate a bandwidth. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.11
hwIDIndexedAPSpRadioEirp
This object indicates a power value. The default value is 127(from V2R8C10; The default value is 255 before V2R8C10.). The configuration is saved but the actual power is determine…
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.71.1.12
hwIDIndexedAPSpRadioAntennaGain
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.71.1.13
hwIDIndexedAPSpRadioWorkMode
This object indicates the radio working mode. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.15
hwIDIndexedAPSpRadioFrequency
This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G, 3: frequency6G.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.16
hwIDIndexedAPSpSpectrumAnalysisSwitch
This object indicates the status of the spectrum analysis function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.17
hwIDIndexedAPSpWidsDeviceDetectSwitch
This object indicates the status of the device detection function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.18
hwIDIndexedAPSpWidsAttackDetectEnBmp obsolete
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.71.1.19
hwIDIndexedAPSp5gRadioProfile
This object indicates the bound 5G radio profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.71.1.2
hwIDIndexedAPSpWidsRogueContainSwitch
This object indicates the status of the device detection function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.20
hwIDIndexedAPSpRadioRowStatus
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.6.139.11.1.71.1.21
hwIDIndexedAPSpRadioSecondChannel
This object indicates a second radio-frequency channel.The value ranges from 42,58,106,122,138,155.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.71.1.22
hwIDIndexedAPSpAutoChannelSelectSwitch
This object indicates the status of the automatic channel selection function.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.23
hwIDIndexedAPSpAutoTxPowerSelectSwitch
This object indicates the status of the automatic power selection function.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.24
hwIDIndexedAPSpSfnRoamCtsSwitch
This object indicates the status of Cts Switch. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.25
hwIDIndexedAPSpSfnRoamBeaconSwitch
This object indicates the status of Beacon Switch. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.26
hwIDIndexedAPSpSfnRoamCtsDelay
This object indicates Cts Delay time. The default value is 0.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.71.1.27
hwIDIndexedAPSpRadioCalibrateFlexibleRadio
This object indicates the status of calibrate flexible-radio. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.28
hwIDIndexedAPSpAutoBandwidthSelectSwitch
This object indicates the status of the automatic bandwidth selection function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.29
hwIDIndexedAPSpMeshProfile
This object indicates the bound Mesh profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.71.1.3
hwIDIndexedAPSpReferenceDataAnalysis
This object indicates the status of the referencing data-analysis function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.30
hwIDIndexedAPSpWidsAttackDetectWeakIv
This object indicates weak IV attack detection. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.31
hwIDIndexedAPSpWidsAttackDetectSpoof
This object indicates spoofing attack detection. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.32
hwIDIndexedAPSpWidsAttackDetectFlood
This object indicates flood attack detection. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.33
hwIDIndexedAPSpWidsAttackDetectWpaPsk
This object indicates brute force attack detection in WPA-PSK authentication. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.34
hwIDIndexedAPSpWidsAttackDetectWpa2Psk
This object indicates brute force attack detection in WPA2-PSK authentication. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.35
hwIDIndexedAPSpWidsAttackDetectWapiPsk
This object indicates brute force attack detection in WAPI-PSK authentication. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.36
hwIDIndexedAPSpWidsAttackDetectWepShareKey
This object indicates brute force attack detection in WEP shared key authentication. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.37
hwIDIndexedAPSpChannelMonitorSwitch
This object indicates the status of the channel monitor function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.38
hwIDIndexedAPSpReference3dData
This object indicates the status of the referencing 3d-data function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.39
hwIDIndexedAPSpWdsProfile
This object indicates the bound WDS profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.71.1.4
hwIDIndexedAPSpLocationProfile
This object indicates the bound location profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.71.1.5
hwIDIndexedAPSpRadio2gProfile
This object indicates the system profile to which AP groups are bound. The default value is default.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.71.1.6
hwIDIndexedAPSpMeshWhitelistProfile
This object indicates the bound whitelist profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.71.1.7
hwIDIndexedAPSpWdsWhitelistProfile
This object indicates the bound whitelist profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.71.1.8
hwIDIndexedAPSpRadioSwitch
This object indicates the name of a 2G radio profile. It is the index of the table.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.71.1.9