hwAPSpWidsDeviceDetectSwitch

HUAWEI-WLAN-CONFIGURATION-MIB · .1.3.6.1.4.1.2011.6.139.11.1.9.1.21
MIB view Table view

Object

column r/w Enumeration 
This object indicates the status of the device detection function. The default value is 255.

Context

MIB
HUAWEI-WLAN-CONFIGURATION-MIB
OID
.1.3.6.1.4.1.2011.6.139.11.1.9.1.21
Type
column
Access
readwrite
Status
current
Parent
hwAPSpecificRadioEntry
Table
hwAPSpecificRadioTable
Siblings
39

Syntax

Enumeration

Values & Constraints

Enumerated Values
2enable
255invalid

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwAPSpRadio
This object indicates the radio ID. It is the index of the table.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.9.1.1
hwAPSpMeshWhitelistProfile
This object indicates the bound whitelist profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.9.1.10
hwAPSpWdsWhitelistProfile
This object indicates the bound whitelist profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.9.1.11
hwAPSpRadioSwitch
This object indicates the switch of radio. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.12
hwAPSpRadioChannel
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.9.1.13
hwAPSpRadioBandwidth
This object indicate a bandwidth. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.14
hwAPSpRadioEirp
This object indicates a power value. The default value is 255. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.9.1.15
hwAPSpRadioAntennaGain
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.9.1.16
hwAPSpRadioCoverageDistance
This object indicates a radio coverage distance. The default value is 65535. The unit is 0.1 km.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.9.1.17
hwAPSpRadioWorkMode
This object indicates the radio working mode. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.18
hwAPSpRadioFrequency
This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G, 3: frequency6G.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.19
hwAPSp5gRadioProfile
This object indicates the bound 5G radio profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.9.1.2
hwAPSpSpectrumAnalysisSwitch
This object indicates the status of the spectrum analysis function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.20
hwAPSpWidsAttackDetectEnBmp obsolete
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.9.1.22
hwAPSpWidsRogueContainSwitch
This object indicates the status of the device detection function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.23
hwAPSpRadioApId
This object indicates the AP ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.9.1.24
hwAPSpRadioSecondChannel
This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.9.1.25
hwAPSpAutoChannelSelectSwitch
This object indicates the status of the automatic channel selection function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.26
hwAPSpAutoTxPowerSelectSwitch
This object indicates the status of the automatic power selection function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.27
hwAPSpSfnRoamCtsSwitch
This object indicates the status of Cts Switch. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.28
hwAPSpSfnRoamBeaconSwitch
This object indicates the status of Beacon Switch. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.29
hwAPSpMeshProfile
This object indicates the bound Mesh profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.9.1.3
hwAPSpSfnRoamCtsDelay
This object indicates Cts Delay time. The default value is 0.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.9.1.30
hwAPSpRadioCalibrateFlexibleRadio
This object indicates the status of Beacon Switch. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.31
hwAPSpAutoBandwidthSelectSwitch
This object indicates the status of the automatic bandwidth selection function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.32
hwAPSpReferenceDataAnalysis
This object indicates the status of the referencing data-analysis function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.33
hwAPSpWidsAttackDetectWeakIv
This object indicates weak IV attack detection. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.34
hwAPSpWidsAttackDetectSpoof
This object indicates spoofing attack detection. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.35
hwAPSpWidsAttackDetectFlood
This object indicates flood attack detection. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.36
hwAPSpWidsAttackDetectWpaPsk
This object indicates brute force attack detection in WPA-PSK authentication. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.37
hwAPSpWidsAttackDetectWpa2Psk
This object indicates brute force attack detection in WPA2-PSK authentication. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.38
hwAPSpWidsAttackDetectWapiPsk
This object indicates brute force attack detection in WAPI-PSK authentication. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.39
hwAPSpWdsProfile
This object indicates the bound WDS profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.9.1.4
hwAPSpWidsAttackDetectWepShareKey
This object indicates brute force attack detection in WEP shared key authentication. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.40
hwAPSpChannelMonitorSwitch
This object indicates the status of the channel monitor function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.41
hwAPSpReference3dData
This object indicates the status of the referencing 3d-data function. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.9.1.42
hwAPSpLocationProfile
This object indicates the bound location profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.9.1.6
hwAPSpRadioRowStatus
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.6.139.11.1.9.1.8
hwAPSpRadio2gProfile
This object indicates the bound 2G radio profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.9.1.9