hwAPSpRadioFrequency
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.9.1.19
Object
column
r/w
Enumeration
This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G, 3: frequency6G.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.9.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAPSpecificRadioEntry
- Table
- hwAPSpecificRadioTable
- Siblings
- 39
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | frequency2G |
2 | frequency5G |
3 | frequency6G |
255 | invalid |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAPSpRadio This object indicates the radio ID. It is the index of the table. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.9.1.1 |
| hwAPSpMeshWhitelistProfile This object indicates the bound whitelist profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.9.1.10 |
| hwAPSpWdsWhitelistProfile This object indicates the bound whitelist profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.9.1.11 |
| hwAPSpRadioSwitch This object indicates the switch of radio. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.12 |
| hwAPSpRadioChannel This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.9.1.13 |
| hwAPSpRadioBandwidth This object indicate a bandwidth. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.14 |
| hwAPSpRadioEirp This object indicates a power value. The default value is 255. The configuration is saved but the actual power is determined by the maximum power supported by the AP. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.9.1.15 |
| hwAPSpRadioAntennaGain This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.9.1.16 |
| hwAPSpRadioCoverageDistance This object indicates a radio coverage distance. The default value is 65535. The unit is 0.1 km. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.9.1.17 |
| hwAPSpRadioWorkMode This object indicates the radio working mode. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.18 |
| hwAPSp5gRadioProfile This object indicates the bound 5G radio profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.9.1.2 |
| hwAPSpSpectrumAnalysisSwitch This object indicates the status of the spectrum analysis function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.20 |
| hwAPSpWidsDeviceDetectSwitch This object indicates the status of the device detection function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.21 |
| hwAPSpWidsAttackDetectEnBmp obsolete This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.9.1.22 |
| hwAPSpWidsRogueContainSwitch This object indicates the status of the device detection function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.23 |
| hwAPSpRadioApId This object indicates the AP ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.9.1.24 |
| hwAPSpRadioSecondChannel This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.9.1.25 |
| hwAPSpAutoChannelSelectSwitch This object indicates the status of the automatic channel selection function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.26 |
| hwAPSpAutoTxPowerSelectSwitch This object indicates the status of the automatic power selection function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.27 |
| hwAPSpSfnRoamCtsSwitch This object indicates the status of Cts Switch. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.28 |
| hwAPSpSfnRoamBeaconSwitch This object indicates the status of Beacon Switch. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.29 |
| hwAPSpMeshProfile This object indicates the bound Mesh profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.9.1.3 |
| hwAPSpSfnRoamCtsDelay This object indicates Cts Delay time. The default value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.9.1.30 |
| hwAPSpRadioCalibrateFlexibleRadio This object indicates the status of Beacon Switch. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.31 |
| hwAPSpAutoBandwidthSelectSwitch This object indicates the status of the automatic bandwidth selection function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.32 |
| hwAPSpReferenceDataAnalysis This object indicates the status of the referencing data-analysis function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.33 |
| hwAPSpWidsAttackDetectWeakIv This object indicates weak IV attack detection. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.34 |
| hwAPSpWidsAttackDetectSpoof This object indicates spoofing attack detection. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.35 |
| hwAPSpWidsAttackDetectFlood This object indicates flood attack detection. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.36 |
| hwAPSpWidsAttackDetectWpaPsk This object indicates brute force attack detection in WPA-PSK authentication. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.37 |
| hwAPSpWidsAttackDetectWpa2Psk This object indicates brute force attack detection in WPA2-PSK authentication. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.38 |
| hwAPSpWidsAttackDetectWapiPsk This object indicates brute force attack detection in WAPI-PSK authentication. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.39 |
| hwAPSpWdsProfile This object indicates the bound WDS profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.9.1.4 |
| hwAPSpWidsAttackDetectWepShareKey This object indicates brute force attack detection in WEP shared key authentication. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.40 |
| hwAPSpChannelMonitorSwitch This object indicates the status of the channel monitor function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.41 |
| hwAPSpReference3dData This object indicates the status of the referencing 3d-data function. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.9.1.42 |
| hwAPSpLocationProfile This object indicates the bound location profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.9.1.6 |
| hwAPSpRadioRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.9.1.8 |
| hwAPSpRadio2gProfile This object indicates the bound 2G radio profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.9.1.9 |