hwAPGrpRadioFrequency
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.5.1.19
Object
column
r/w
Enumeration
This object indicates the setting of the frequency band for radio 0. The default value is 1. 1: frequency2G, 2: frequency5G, 3: frequency6G.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.5.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAPGroupRadioEntry
- Table
- hwAPGroupRadioTable
- Siblings
- 31
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | frequency2G |
2 | frequency5G |
3 | frequency6G |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAPGrpRadioId This object indicates the radio ID. It is the index of the table. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.5.1.1 |
| hwAPGrpMeshWhitelistProfile This object indicates the bound whitelist profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.5.1.10 |
| hwAPGrpWdsWhitelistProfile This object indicates the bound whitelist profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.5.1.11 |
| hwAPGrpRadioSwitch This object indicates the name of a 2G radio profile. It is the index of the table. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.12 |
| hwAPGrpRadioChannel This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.5.1.13 |
| hwAPGrpRadioBandwidth This object indicate a bandwidth. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.14 |
| hwAPGrpRadioEirp This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.5.1.15 |
| hwAPGrpRadioAntennaGain This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.5.1.16 |
| hwAPGrpRadioCoverageDistance This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.5.1.17 |
| hwAPGrpRadioWorkMode This object indicates the radio working mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.18 |
| hwAPGrpRadio5gProfile This object indicates the bound 5G radio profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.5.1.2 |
| hwAPGrpSpectrumAnalysisSwitch This object indicates the status of the spectrum analysis function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.20 |
| hwAPGrpWidsDeviceDetectSwitch This object indicates the status of the device detection function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.21 |
| hwAPGrpWidsAttackDetectEnBmp This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.5.1.22 |
| hwAPGrpWidsRogueContainSwitch This object indicates the status of the device detection function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.23 |
| hwAPGrpRadioSecondChannel This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.5.1.24 |
| hwAPGrpAutoChannelSelectSwitch This object indicates the status of the automatic channel selection function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.25 |
| hwAPGrpAutoTxPowerSelectSwitch This object indicates the status of the automatic power selection function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.26 |
| hwAPGrpSfnRoamCtsSwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.27 |
| hwAPGrpSfnRoamBeaconSwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.28 |
| hwAPGrpSfnRoamCtsDelay Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.5.1.29 |
| hwAPGrpMeshProfile This object indicates the bound Mesh profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.5.1.3 |
| hwAPGroupRadioCalibrateFlexibleRadio Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.30 |
| hwAPGrpAutoBandwidthSelectSwitch This object indicates the status of the automatic bandwidth selection function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.31 |
| hwAPGrpReferenceDataAnalysis This object indicates the status of the referencing data-analysis function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.32 |
| hwAPGrpChannelMonitorSwitch This object indicates the status of the channel monitor function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.33 |
| hwAPGrpReference3dData This object indicates the status of the referencing 3d-data function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.5.1.34 |
| hwAPGrpWdsProfile This object indicates the bound WDS profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.5.1.4 |
| hwAPGrpLocationProfile This object indicates the bound location profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.5.1.6 |
| hwAPGrpRadioRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? R… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.5.1.8 |
| hwAPGrpRadio2gProfile This object indicates the 2G radio profile to which AP groups are bound. The default value is default. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.5.1.9 |