hwAPGrpRadioChannel

HUAWEI-WLAN-CONFIGURATION-MIB · .1.3.6.1.4.1.2011.6.139.11.1.5.1.13
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).

Context

MIB
HUAWEI-WLAN-CONFIGURATION-MIB
OID
.1.3.6.1.4.1.2011.6.139.11.1.5.1.13
Type
column
Access
readwrite
Status
current
Parent
hwAPGroupRadioEntry
Table
hwAPGroupRadioTable
Siblings
31

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwAPGrpRadioId
This object indicates the radio ID. It is the index of the table.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.5.1.1
hwAPGrpMeshWhitelistProfile
This object indicates the bound whitelist profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.5.1.10
hwAPGrpWdsWhitelistProfile
This object indicates the bound whitelist profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.5.1.11
hwAPGrpRadioSwitch
This object indicates the name of a 2G radio profile. It is the index of the table.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.12
hwAPGrpRadioBandwidth
This object indicate a bandwidth. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.14
hwAPGrpRadioEirp
This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.5.1.15
hwAPGrpRadioAntennaGain
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.5.1.16
hwAPGrpRadioCoverageDistance
This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.5.1.17
hwAPGrpRadioWorkMode
This object indicates the radio working mode. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.18
hwAPGrpRadioFrequency
This object indicates the setting of the frequency band for radio 0. The default value is 1. 1: frequency2G, 2: frequency5G, 3: frequency6G.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.19
hwAPGrpRadio5gProfile
This object indicates the bound 5G radio profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.5.1.2
hwAPGrpSpectrumAnalysisSwitch
This object indicates the status of the spectrum analysis function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.20
hwAPGrpWidsDeviceDetectSwitch
This object indicates the status of the device detection function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.21
hwAPGrpWidsAttackDetectEnBmp
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.5.1.22
hwAPGrpWidsRogueContainSwitch
This object indicates the status of the device detection function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.23
hwAPGrpRadioSecondChannel
This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.5.1.24
hwAPGrpAutoChannelSelectSwitch
This object indicates the status of the automatic channel selection function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.25
hwAPGrpAutoTxPowerSelectSwitch
This object indicates the status of the automatic power selection function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.26
hwAPGrpSfnRoamCtsSwitch
Description.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.27
hwAPGrpSfnRoamBeaconSwitch
Description.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.28
hwAPGrpSfnRoamCtsDelay
Description.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.5.1.29
hwAPGrpMeshProfile
This object indicates the bound Mesh profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.5.1.3
hwAPGroupRadioCalibrateFlexibleRadio
Description.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.30
hwAPGrpAutoBandwidthSelectSwitch
This object indicates the status of the automatic bandwidth selection function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.31
hwAPGrpReferenceDataAnalysis
This object indicates the status of the referencing data-analysis function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.32
hwAPGrpChannelMonitorSwitch
This object indicates the status of the channel monitor function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.33
hwAPGrpReference3dData
This object indicates the status of the referencing 3d-data function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.5.1.34
hwAPGrpWdsProfile
This object indicates the bound WDS profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.5.1.4
hwAPGrpLocationProfile
This object indicates the bound location profile.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.5.1.6
hwAPGrpRadioRowStatus
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? R…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.6.139.11.1.5.1.8
hwAPGrpRadio2gProfile
This object indicates the 2G radio profile to which AP groups are bound. The default value is default.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.5.1.9