hw5gRadioWifiLight
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.17.1.48
Object
column
r/w
Enumeration
This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1 NOTE ? If Mesh is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the AP with the weakest signal among received signals from all neighboring APs.? If WDS is enabled on an AP, the the Wireless indicator blinking frequency reflects the signal strength of the connected WDS AP.? For a Leaf AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP.? For a Middle AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Root AP.? For a root AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP with the weakest signal.? If WDS or Mesh is not enabled on an AP, the Wireless indicator blinking frequency reflects the service traffic volume on the radio.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.17.1.48- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hw5gRadioProfileEntry
- Table
- hw5gRadioProfileTable
- Siblings
- 71
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | signalStrength |
2 | traffic |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hw5gRadioProfileName This object indicates the name of a 5G radio profile. It is the index of the table. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.1 |
| hw5gRadioGuardIntervalMode This object indicates the GI mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.10 |
| hw5gRadioShortPreamble This object indicates whether the short preamble is enabled. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.11 |
| hw5gRadioFragmentationThreshold This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.12 |
| hw5gRadioHtAmpduSwitch This object indicates the status of the aggregation function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.13 |
| hw5gRadioHtAmpduMaxLengthExponent This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes ? 3: 65535 bytes. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.14 |
| hw5gRadioVhtAmpduMaxLengthExponent This object indicates the maximum length of frames converged by an MPDU. The default value is 7 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes? 3: 65535 bytes? 4: 131071 bytes? 5… | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.15 |
| hw5gRadioVhtAmsduSwitch This object indicates the status of the A-MSDU aggregation function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.16 |
| hw5gRadioVhtAmsduMaxFrameNum This object indicates the maximum number of sub-frames that can be aggregated into an A-MSDU. The default value is 2. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.17 |
| hw5gRadioDot11aBasicRate This object indicates the basic rate set of the 802.11bg protocol. The default value is 0x148 (6 Mbit/s/12 Mbit/s/24 Mbit/s) ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bi… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.18 |
| hw5gRadioDot11aSupportRate This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFD8 (6 Mbit/s/9 Mbit/s/12 Mbit/s/18 Mbit/s/24 Mbit/s/36 Mbit/s/48 Mbit/s/54 Mbit/s).?… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.19 |
| hw5gRadioMulticastRate This object indicates the multicast rate. The default value is 0x8(6M).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 1… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.20 |
| hw5gRadioVhtNssMapMaxMcs This object indicates the maximum MCS value for 802.11ac radios. The number of spatial flows is 8 and the maximum MCS value is 7-9. The format is x?x?x?x?x?x?x?x. The default valu… | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.21 |
| hw5gRadioWmmMandatorySwitch This object indicates the status of the mandatory WMM matching function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.22 |
| hw5gRadioApEDCAVoiceECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.23 |
| hw5gRadioApEDCAVoiceECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.24 |
| hw5gRadioApEDCAVoiceAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.25 |
| hw5gRadioApEDCAVoiceTXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.26 |
| hw5gRadioApEDCAVoiceAckPolicy This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.27 |
| hw5gRadioApEDCAVideoECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.28 |
| hw5gRadioApEDCAVideoECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.29 |
| hw5gRadioApEDCAVideoAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.30 |
| hw5gRadioApEDCAVideoTXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.31 |
| hw5gRadioApEDCAVideoAckPolicy This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.32 |
| hw5gRadioApEDCABEECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.33 |
| hw5gRadioApEDCABEECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.34 |
| hw5gRadioApEDCABEAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.35 |
| hw5gRadioApEDCABETXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BE services on APs. The default value is 0. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.36 |
| hw5gRadioApEDCABEAckPolicy This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.37 |
| hw5gRadioApEDCABKECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.38 |
| hw5gRadioApEDCABKECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.39 |
| hw5gRadioApEDCABKAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7.. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.40 |
| hw5gRadioApEDCABKTXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.41 |
| hw5gRadioApEDCABKAckPolicy This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.42 |
| hw5gRadioWmmSwitch This object indicates the status of the WMM function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.43 |
| hw5gRadioRtsCtsThreshold This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.44 |
| hw5gRadioRtsCtsMode This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3(from V2R8C10; The default value is 2 before V2R8C10.). In V200R019C10 and later … | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.45 |
| hw5gRadioPowerAutoAdjustSwitch This object indicates the status of the user-by-user power control function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.46 |
| hw5gRadioBeamformingSwitch This object indicates the status of the beamforming function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.47 |
| hw5gRadioChannelSwitchAnnouncementSwitch This object indicates the status of the channel switchover announcement function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.49 |
| hw5gRadioChannelSwitchMode This object indicates the channel switch announcement mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.50 |
| hw5gRadioAutoOffServiceSwitch This object indicates the status of the scheduled radio disabling function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.51 |
| hw5gRadioAutoOffServiceStartTime This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23… | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.52 |
| hw5gRadioAutoOffServiceEndTime This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss. NOTE? hh specifies the hour. The value is an integer that ranges from 0 to 2… | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.53 |
| hw5gRadioInterferenceDetectSwitch This object indicates the status of the user-by-user power control function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.54 |
| hw5gRadioInterferenceIntraFrequencyThreshold This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.55 |
| hw5gRadioInterferenceAdjacentFrequencyThreshold This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The defau… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.56 |
| hw5gRadioInterferenceStationThreshold This object indicates the alarm threshold for adjacent-channel interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to t… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.57 |
| hw5gRadioRrmProfile This object indicates the bound RRM profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.58 |
| hw5gRadioAirScanProfile This object indicates the bound air scan profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.59 |
| hw5gRadioBeaconInterval This object indicates a Beacon interval. The default value is 100. It is expressed in ms. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.6 |
| hw5gRadioProfileRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROW… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.17.1.60 |
| hw5gRadioProfileUtmostPowerSwitch This object indicates the switch for the function of sending packets at maximum power, the default value is 2(auto). | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.61 |
| hw5gRadioProfileRadioType This object indicates the type of radio. The default value is 16. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.63 |
| hw5gRadioProfileSmartAntennaEnable This object indicates the status of the smart antenna switch. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.64 |
| hw5gRadioProfileMuMIMOEnable This object indicates the status of the MU MIMO switch. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.65 |
| hw5gRadioProfileTxChainNum This object indicates the number of the TX chain. The default value is 4. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.66 |
| hw5gRadioProfileRxChainNum This object indicates the number of the RX chain. The default value is 4. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.67 |
| hw5gRadioProfileAutoOffTimeRange This object indicates the time range for disabling the radio. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.68 |
| hw5gRadioAgileAntennaPolarSwitch This object indicates the status of the agile antenna polarization. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.69 |
| hw5gRadioProfileCCAThreshold This object indicates the value of the CCA threshold. The default value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.70 |
| hw5gRadioProfileSmartAntennaLowPerThreshold This object indicates the value of the smart antenna low per threshold. The default value is 20. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.71 |
| hw5gRadioProfileSmartAntennaHighPerThreshold This object indicates the value of the smart antenna high per threshold. The default value is 80. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.72 |
| hw5gRadioProfileSmartAntennaTrainingInterval This object indicates the value of the smart antenna training interval. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.73 |
| hw5gRadioProfileSmartAntennaTrainingMPDUNum This object indicates the value of the smart antenna training MPDU number. The default value is 640. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.74 |
| hw5gRadioProfileSmartAntThruputTrainThreshold This object indicates the value of the smart antenna throughput trigger training threshold. The default value is 10. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.75 |
| hw5gRadioDot11axGuardIntervalMode This object indicates the dot11ax GI mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.76 |
| hw5gRadioHighwayBssid This object indicates the highway bssid. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.139.11.1.17.1.77 |
| hw5gRadioAutonavigationBeaconInterval This object indicates a autonavigation beacon interval. The default value is 60. It is expressed in ms. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.78 |
| hw5gRadioVipUserBandwidthReservationRatio This object indicates the proportion of reserved bandwidth for VIP users. The default value is 20. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.79 |
| hw5GRadioRu26ToleranceSwitch This object indicates the status of ru26-tolerance switch. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.80 |