hw5gRadioInterferenceAdjacentFrequencyThreshold
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.17.1.56
Object
column
r/w
Unsigned32
This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.17.1.56- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hw5gRadioProfileEntry
- Table
- hw5gRadioProfileTable
- Siblings
- 71
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hw5gRadioProfileName This object indicates the name of a 5G radio profile. It is the index of the table. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.1 |
| hw5gRadioGuardIntervalMode This object indicates the GI mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.10 |
| hw5gRadioShortPreamble This object indicates whether the short preamble is enabled. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.11 |
| hw5gRadioFragmentationThreshold This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.12 |
| hw5gRadioHtAmpduSwitch This object indicates the status of the aggregation function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.13 |
| hw5gRadioHtAmpduMaxLengthExponent This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes ? 3: 65535 bytes. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.14 |
| hw5gRadioVhtAmpduMaxLengthExponent This object indicates the maximum length of frames converged by an MPDU. The default value is 7 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes? 3: 65535 bytes? 4: 131071 bytes? 5… | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.15 |
| hw5gRadioVhtAmsduSwitch This object indicates the status of the A-MSDU aggregation function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.16 |
| hw5gRadioVhtAmsduMaxFrameNum This object indicates the maximum number of sub-frames that can be aggregated into an A-MSDU. The default value is 2. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.17 |
| hw5gRadioDot11aBasicRate This object indicates the basic rate set of the 802.11bg protocol. The default value is 0x148 (6 Mbit/s/12 Mbit/s/24 Mbit/s) ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bi… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.18 |
| hw5gRadioDot11aSupportRate This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFD8 (6 Mbit/s/9 Mbit/s/12 Mbit/s/18 Mbit/s/24 Mbit/s/36 Mbit/s/48 Mbit/s/54 Mbit/s).?… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.19 |
| hw5gRadioMulticastRate This object indicates the multicast rate. The default value is 0x8(6M).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 1… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.20 |
| hw5gRadioVhtNssMapMaxMcs This object indicates the maximum MCS value for 802.11ac radios. The number of spatial flows is 8 and the maximum MCS value is 7-9. The format is x?x?x?x?x?x?x?x. The default valu… | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.21 |
| hw5gRadioWmmMandatorySwitch This object indicates the status of the mandatory WMM matching function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.22 |
| hw5gRadioApEDCAVoiceECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.23 |
| hw5gRadioApEDCAVoiceECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.24 |
| hw5gRadioApEDCAVoiceAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.25 |
| hw5gRadioApEDCAVoiceTXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.26 |
| hw5gRadioApEDCAVoiceAckPolicy This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.27 |
| hw5gRadioApEDCAVideoECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.28 |
| hw5gRadioApEDCAVideoECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.29 |
| hw5gRadioApEDCAVideoAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.30 |
| hw5gRadioApEDCAVideoTXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.31 |
| hw5gRadioApEDCAVideoAckPolicy This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.32 |
| hw5gRadioApEDCABEECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.33 |
| hw5gRadioApEDCABEECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.34 |
| hw5gRadioApEDCABEAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.35 |
| hw5gRadioApEDCABETXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BE services on APs. The default value is 0. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.36 |
| hw5gRadioApEDCABEAckPolicy This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.37 |
| hw5gRadioApEDCABKECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.38 |
| hw5gRadioApEDCABKECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.39 |
| hw5gRadioApEDCABKAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7.. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.40 |
| hw5gRadioApEDCABKTXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.41 |
| hw5gRadioApEDCABKAckPolicy This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.42 |
| hw5gRadioWmmSwitch This object indicates the status of the WMM function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.43 |
| hw5gRadioRtsCtsThreshold This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.44 |
| hw5gRadioRtsCtsMode This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3(from V2R8C10; The default value is 2 before V2R8C10.). In V200R019C10 and later … | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.45 |
| hw5gRadioPowerAutoAdjustSwitch This object indicates the status of the user-by-user power control function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.46 |
| hw5gRadioBeamformingSwitch This object indicates the status of the beamforming function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.47 |
| hw5gRadioWifiLight This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1 NOTE ? If Mesh is enabled on an AP, the Wireless indicat… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.48 |
| hw5gRadioChannelSwitchAnnouncementSwitch This object indicates the status of the channel switchover announcement function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.49 |
| hw5gRadioChannelSwitchMode This object indicates the channel switch announcement mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.50 |
| hw5gRadioAutoOffServiceSwitch This object indicates the status of the scheduled radio disabling function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.51 |
| hw5gRadioAutoOffServiceStartTime This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23… | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.52 |
| hw5gRadioAutoOffServiceEndTime This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss. NOTE? hh specifies the hour. The value is an integer that ranges from 0 to 2… | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.53 |
| hw5gRadioInterferenceDetectSwitch This object indicates the status of the user-by-user power control function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.54 |
| hw5gRadioInterferenceIntraFrequencyThreshold This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.55 |
| hw5gRadioInterferenceStationThreshold This object indicates the alarm threshold for adjacent-channel interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to t… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.57 |
| hw5gRadioRrmProfile This object indicates the bound RRM profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.58 |
| hw5gRadioAirScanProfile This object indicates the bound air scan profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.59 |
| hw5gRadioBeaconInterval This object indicates a Beacon interval. The default value is 100. It is expressed in ms. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.6 |
| hw5gRadioProfileRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROW… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.17.1.60 |
| hw5gRadioProfileUtmostPowerSwitch This object indicates the switch for the function of sending packets at maximum power, the default value is 2(auto). | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.61 |
| hw5gRadioProfileRadioType This object indicates the type of radio. The default value is 16. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.63 |
| hw5gRadioProfileSmartAntennaEnable This object indicates the status of the smart antenna switch. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.64 |
| hw5gRadioProfileMuMIMOEnable This object indicates the status of the MU MIMO switch. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.65 |
| hw5gRadioProfileTxChainNum This object indicates the number of the TX chain. The default value is 4. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.66 |
| hw5gRadioProfileRxChainNum This object indicates the number of the RX chain. The default value is 4. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.67 |
| hw5gRadioProfileAutoOffTimeRange This object indicates the time range for disabling the radio. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.17.1.68 |
| hw5gRadioAgileAntennaPolarSwitch This object indicates the status of the agile antenna polarization. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.69 |
| hw5gRadioProfileCCAThreshold This object indicates the value of the CCA threshold. The default value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.70 |
| hw5gRadioProfileSmartAntennaLowPerThreshold This object indicates the value of the smart antenna low per threshold. The default value is 20. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.71 |
| hw5gRadioProfileSmartAntennaHighPerThreshold This object indicates the value of the smart antenna high per threshold. The default value is 80. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.72 |
| hw5gRadioProfileSmartAntennaTrainingInterval This object indicates the value of the smart antenna training interval. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.73 |
| hw5gRadioProfileSmartAntennaTrainingMPDUNum This object indicates the value of the smart antenna training MPDU number. The default value is 640. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.74 |
| hw5gRadioProfileSmartAntThruputTrainThreshold This object indicates the value of the smart antenna throughput trigger training threshold. The default value is 10. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.75 |
| hw5gRadioDot11axGuardIntervalMode This object indicates the dot11ax GI mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.76 |
| hw5gRadioHighwayBssid This object indicates the highway bssid. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.139.11.1.17.1.77 |
| hw5gRadioAutonavigationBeaconInterval This object indicates a autonavigation beacon interval. The default value is 60. It is expressed in ms. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.78 |
| hw5gRadioVipUserBandwidthReservationRatio This object indicates the proportion of reserved bandwidth for VIP users. The default value is 20. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.17.1.79 |
| hw5GRadioRu26ToleranceSwitch This object indicates the status of ru26-tolerance switch. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.17.1.80 |