hwWlanCapwapMessageIntegrityPskMandatoryMatchSwitch
HUAWEI-WLAN-CAPWAP-MIB ·
.1.3.6.1.4.1.2011.6.139.9.2.15
Object
scalar
r/w
Enumeration
The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
Context
- MIB
- HUAWEI-WLAN-CAPWAP-MIB
- OID
.1.3.6.1.4.1.2011.6.139.9.2.15- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwWlanCapwapSysPara
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwWlanCapwapDtlsSwitch This object indicates the status of the global DTLS function. The default value is 3. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.1 |
| hwWlanCapwapControlPriorityRemote This object indicates the priority of CAPWAP control packets sent by APs to ACs. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.139.9.2.10 |
| hwWlanCapwapSensitiveInfoPsk This object indicates the PSK used for encrypting sensitive information between ACs and APs. | scalar | OctetString | .1.3.6.1.4.1.2011.6.139.9.2.11 |
| hwWlanCapwapInterControllerSensitiveInfoPsk This object indicates the PSK used for encrypting sensitive information between ACs. | scalar | OctetString | .1.3.6.1.4.1.2011.6.139.9.2.12 |
| hwWlanCapwapMessageIntegrityPsk This object indicates the PSK for checking integrity of CAPWAP packets between ACs and APs. | scalar | OctetString | .1.3.6.1.4.1.2011.6.139.9.2.13 |
| hwWlanCapwapInterControllerMessageIntegrityPsk The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device. | scalar | OctetString | .1.3.6.1.4.1.2011.6.139.9.2.14 |
| hwWlanCapwapMsgCheckSwitch This object indicates whether the CAPWAP packet check function is enabled between ACs and APs. The value 1 indicates that this function is disabled, and the value 2 indicates that… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.16 |
| hwWlanCapwapInterControllerMsgCheckSwitch The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.17 |
| hwWlanCapwapDtlsDataSwitch This object indicates the status of the global DTLS function of data-link. The default value is 1: disable. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.18 |
| hwWlanCapwapInterControllerDtlsDataSwitch This object indicates the status of the inter-controller DTLS function of data-link. The default value is 1: disable. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.19 |
| hwWlanCapwapDtlsPsk This object indicates the global DTLS PSK value. In V200R021C00SPC100 and later version, the size range changes to 8~32. | scalar | OctetString | .1.3.6.1.4.1.2011.6.139.9.2.2 |
| hwWlanCapwapDtlsDefaultCertSwitch This object indicates whether the global default cert function for CAPWAP DTLS is enabled. The default value is 2. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.20 |
| hwWlanCapwapDtlsNoAuthSwitch This object indicates whether the no auth function for CAPWAP DTLS is enabled. The default value is 1. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.21 |
| hwWlanCapwapDtlsVersion1Dot0Switch This object indicates whether the version1.0 of CAPWAP DTLS is enabled. The default value is 1. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.22 |
| hwWlanCapwapDtlsCbcSwitch This object indicates whether cbc support for CAPWAP DTLS is enabled. The default value is 1. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.23 |
| hwWlanCapwapControlMtu This object indicates the MTU for sending control packets in a CAPWAP tunnel. The default value is 1500. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.139.9.2.24 |
| hwWlanCapwapDtlsDefaultPskSwitch This object indicates whether the global DtlsDefaultPsk function is enabled. The default value is 2. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.3 |
| hwWlanCapwapIpv6Enable Work mode of capwap source. It can be set
ipv4(1): capwap source just can be configed to ipv4 source.
ipv6(2): capwap source just can be configed to ipv6 source.
doubleStack(3): … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.4 |
| hwWlanCapwapInterControllerDtlsEncrpyt This object indicates whether the DTLS function is enabled between ACs. The default value is 3. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.139.9.2.5 |
| hwWlanCapwapInterControllerDtlsPsk This object indicates the DTLS PSK used between ACs. In V200R021C00SPC100 and later version, the size range changes to 8~32. | scalar | OctetString | .1.3.6.1.4.1.2011.6.139.9.2.6 |
| hwCapwapEchoInterval This object indicates the interval for sending Echo packets in a CAPWAP tunnel. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.139.9.2.7 |
| hwCapwapEchoTimes This object indicates the maximum number of Echo packet timeouts in a CAPWAP tunnel. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.139.9.2.8 |
| hwWlanCapwapControlPriorityLocal This object indicates the priority of CAPWAP control packets sent by ACs to APs. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.139.9.2.9 |