hwWlanCapwapIpv6Enable

HUAWEI-WLAN-CAPWAP-MIB · .1.3.6.1.4.1.2011.6.139.9.2.4
MIB view Table view

Object

scalar r/w Enumeration 
Work mode of capwap source. It can be set 
ipv4(1): capwap source just can be configed to ipv4 source.
ipv6(2): capwap source just can be configed to ipv6 source.
doubleStack(3): capwap source can be configed to ipv4 and ipv6 source at the same time.

Context

MIB
HUAWEI-WLAN-CAPWAP-MIB
OID
.1.3.6.1.4.1.2011.6.139.9.2.4
Type
scalar
Access
readwrite
Status
current
Parent
hwWlanCapwapSysPara
Siblings
23

Syntax

Enumeration

Values & Constraints

Enumerated Values
1ipv4
2ipv6
3doubleStack

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwWlanCapwapDtlsSwitch
This object indicates the status of the global DTLS function. The default value is 3.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.1
hwWlanCapwapControlPriorityRemote
This object indicates the priority of CAPWAP control packets sent by APs to ACs.
scalarInteger32.1.3.6.1.4.1.2011.6.139.9.2.10
hwWlanCapwapSensitiveInfoPsk
This object indicates the PSK used for encrypting sensitive information between ACs and APs.
scalarOctetString.1.3.6.1.4.1.2011.6.139.9.2.11
hwWlanCapwapInterControllerSensitiveInfoPsk
This object indicates the PSK used for encrypting sensitive information between ACs.
scalarOctetString.1.3.6.1.4.1.2011.6.139.9.2.12
hwWlanCapwapMessageIntegrityPsk
This object indicates the PSK for checking integrity of CAPWAP packets between ACs and APs.
scalarOctetString.1.3.6.1.4.1.2011.6.139.9.2.13
hwWlanCapwapInterControllerMessageIntegrityPsk
The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
scalarOctetString.1.3.6.1.4.1.2011.6.139.9.2.14
hwWlanCapwapMessageIntegrityPskMandatoryMatchSwitch
The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.15
hwWlanCapwapMsgCheckSwitch
This object indicates whether the CAPWAP packet check function is enabled between ACs and APs. The value 1 indicates that this function is disabled, and the value 2 indicates that…
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.16
hwWlanCapwapInterControllerMsgCheckSwitch
The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.17
hwWlanCapwapDtlsDataSwitch
This object indicates the status of the global DTLS function of data-link. The default value is 1: disable.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.18
hwWlanCapwapInterControllerDtlsDataSwitch
This object indicates the status of the inter-controller DTLS function of data-link. The default value is 1: disable.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.19
hwWlanCapwapDtlsPsk
This object indicates the global DTLS PSK value. In V200R021C00SPC100 and later version, the size range changes to 8~32.
scalarOctetString.1.3.6.1.4.1.2011.6.139.9.2.2
hwWlanCapwapDtlsDefaultCertSwitch
This object indicates whether the global default cert function for CAPWAP DTLS is enabled. The default value is 2.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.20
hwWlanCapwapDtlsNoAuthSwitch
This object indicates whether the no auth function for CAPWAP DTLS is enabled. The default value is 1.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.21
hwWlanCapwapDtlsVersion1Dot0Switch
This object indicates whether the version1.0 of CAPWAP DTLS is enabled. The default value is 1.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.22
hwWlanCapwapDtlsCbcSwitch
This object indicates whether cbc support for CAPWAP DTLS is enabled. The default value is 1.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.23
hwWlanCapwapControlMtu
This object indicates the MTU for sending control packets in a CAPWAP tunnel. The default value is 1500.
scalarInteger32.1.3.6.1.4.1.2011.6.139.9.2.24
hwWlanCapwapDtlsDefaultPskSwitch
This object indicates whether the global DtlsDefaultPsk function is enabled. The default value is 2.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.3
hwWlanCapwapInterControllerDtlsEncrpyt
This object indicates whether the DTLS function is enabled between ACs. The default value is 3.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.9.2.5
hwWlanCapwapInterControllerDtlsPsk
This object indicates the DTLS PSK used between ACs. In V200R021C00SPC100 and later version, the size range changes to 8~32.
scalarOctetString.1.3.6.1.4.1.2011.6.139.9.2.6
hwCapwapEchoInterval
This object indicates the interval for sending Echo packets in a CAPWAP tunnel.
scalarInteger32.1.3.6.1.4.1.2011.6.139.9.2.7
hwCapwapEchoTimes
This object indicates the maximum number of Echo packet timeouts in a CAPWAP tunnel.
scalarInteger32.1.3.6.1.4.1.2011.6.139.9.2.8
hwWlanCapwapControlPriorityLocal
This object indicates the priority of CAPWAP control packets sent by ACs to APs.
scalarInteger32.1.3.6.1.4.1.2011.6.139.9.2.9