hwVOPUPBOConfProfUpboKLREFUs3
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.1.8.1.18
Object
column
r/w
0.1 dB Integer32
This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for the upstream band US3, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0. The use of the special value 0 is described in 7.2.1.3.2/G.993.2. Unit: 0.1 dB.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.1.8.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.1 dB
- Parent
- hwVOPUPBOConfProfEntry
- Table
- hwVOPUPBOConfProfTable
- Siblings
- 26
Syntax
0.1 dB Integer32
Values & Constraints
Object Constraints
range: 0-0
range: 18-635
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPUPBOConfProfIndex The hwVOPUPBOConfProfIndex identifies a row in the hwVOPUPBOConfProfTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.1 |
| hwVOPUPBOConfProfPsdBUs2 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US2.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.10 |
| hwVOPUPBOConfProfPsdAUs3 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US3.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.11 |
| hwVOPUPBOConfProfPsdBUs3 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US3.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.12 |
| hwVOPUPBOConfProfPsdAUs4 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US4.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.13 |
| hwVOPUPBOConfProfPsdBUs4 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US4.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.14 |
| hwVOPUPBOConfProfBoostMode The Equalized FEXT UPBO method.
Options:
1. disable(1) - The Equalized FEXT UPBO method is not supported.
2. enable(2) - The Equalized FEXT UPBO method is supported. | column | Xdsl2UpboBoostMode | .1.3.6.1.4.1.2011.6.144.1.1.8.1.15 |
| hwVOPUPBOConfProfUpboKLREFUs1 This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US1, for the optional Equalized FEXT UPBO method.
The… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.16 |
| hwVOPUPBOConfProfUpboKLREFUs2 This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US2, for the optional Equalized FEXT UPBO method.
The… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.17 |
| hwVOPUPBOConfProfUpboKLREFUs4 This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US4, for the optional Equalized FEXT UPBO method.
The… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.19 |
| hwVOPUPBOConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be de… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.144.1.1.8.1.2 |
| hwVOPUPBOConfProfAeleMode This parameter defines the UPBO electrical length estimation mode to be used
in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.993.2.
The value of… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.20 |
| hwVOPUPBOConfProfUpboElmt This parameter defines the UPBO electrical length minimum threshold percentile
in percent used in the Alternative Electrical Length Estimation method (ELE-M1)
in clause 7.2.1.3.… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.21 |
| hwVOPGfastUPBOConfProfUpboKL This configuration parameter defines the G.fast electrical length expressed in dB at 1MHz, kl0,
configured by the DPU-MIB.The value ranges from 0 (coded as 0) to 128 dB (coded as … | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.22 |
| hwVOPGfastUPBOConfProfUpboKLF Defines the G.fast upstream power backoff force mode. | column | Xdsl2UpboKLF | .1.3.6.1.4.1.2011.6.144.1.1.8.1.23 |
| hwVOPGfastUPBOConfProfKlAuto This parameter defines the mode in which kl0 is computed when hwVOPGfastUPBOConfProfUpboKLF is auto.
Options:
1--max(kl0_CO,kl0_CPE)
2--min(kl0_CO,kl0_CPE)
3--kl0_CO
4--kl0_CPE | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.24 |
| hwVOPGfastUPBOConfProfPsdA This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off.A UPBOPSD shall consist of two parameters [a… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.25 |
| hwVOPGfastUPBOConfProfPsdB This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off.A UPBOPSD shall consist of two parameters [a… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.26 |
| hwVOPGfastUPBOConfProfUpboKLREF This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off, for the optional Equalized FEXT UPBO method.
The value ranges from 1.8 to … | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.27 |
| hwVOPUPBOConfProfDescription The hwVOPUPBOConfProfDescription contains an optional human readable description for the profile. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.1.8.1.3 |
| hwVOPUPBOConfProfUpboKL This configuration parameter defines the electrical length expressed in dB at 1MHz, kl0,
configured by the CO-MIB.The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.4 |
| hwVOPUPBOConfProfUpboKLF Defines the upstream power backoff force mode. | column | Xdsl2UpboKLF | .1.3.6.1.4.1.2011.6.144.1.1.8.1.5 |
| hwVOPUPBOConfProfKlAuto This parameter defines the mode in which kl0 is computed when hwVOPUPBOConfProfUpboKLF is auto.
Options:
1--max(kl0_CO,kl0_CPE)
2--min(kl0_CO,kl0_CPE)
3--kl0_CO
4--kl0_CPE | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.6 |
| hwVOPUPBOConfProfPsdAUs1 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US1.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.7 |
| hwVOPUPBOConfProfPsdBUs1 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US1.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.8 |
| hwVOPUPBOConfProfPsdAUs2 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US2.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.9 |