hwVOPUPBOConfProfPsdAUs1
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.1.8.1.7
Object
column
r/w
0.01 dBm/Hz Integer32
This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US1. A UPBOPSD defined for each band shall consist of two parameters [a, b]. Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting hwVOPUPBOConfProfPsdAUs1 to 4000 and hwVOPUPBOConfProfPsdBUs1 to 0 is a special configuration to disable UPBO in the respective upstream band. Unit: 0.01 dBm/Hz.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.1.8.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.01 dBm/Hz
- Parent
- hwVOPUPBOConfProfEntry
- Table
- hwVOPUPBOConfProfTable
- Siblings
- 26
Syntax
0.01 dBm/Hz Integer32
Values & Constraints
Object Constraints
range: 4000-8095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPUPBOConfProfIndex The hwVOPUPBOConfProfIndex identifies a row in the hwVOPUPBOConfProfTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.1 |
| hwVOPUPBOConfProfPsdBUs2 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US2.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.10 |
| hwVOPUPBOConfProfPsdAUs3 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US3.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.11 |
| hwVOPUPBOConfProfPsdBUs3 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US3.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.12 |
| hwVOPUPBOConfProfPsdAUs4 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US4.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.13 |
| hwVOPUPBOConfProfPsdBUs4 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US4.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.14 |
| hwVOPUPBOConfProfBoostMode The Equalized FEXT UPBO method.
Options:
1. disable(1) - The Equalized FEXT UPBO method is not supported.
2. enable(2) - The Equalized FEXT UPBO method is supported. | column | Xdsl2UpboBoostMode | .1.3.6.1.4.1.2011.6.144.1.1.8.1.15 |
| hwVOPUPBOConfProfUpboKLREFUs1 This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US1, for the optional Equalized FEXT UPBO method.
The… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.16 |
| hwVOPUPBOConfProfUpboKLREFUs2 This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US2, for the optional Equalized FEXT UPBO method.
The… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.17 |
| hwVOPUPBOConfProfUpboKLREFUs3 This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US3, for the optional Equalized FEXT UPBO method.
The… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.18 |
| hwVOPUPBOConfProfUpboKLREFUs4 This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US4, for the optional Equalized FEXT UPBO method.
The… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.19 |
| hwVOPUPBOConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be de… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.144.1.1.8.1.2 |
| hwVOPUPBOConfProfAeleMode This parameter defines the UPBO electrical length estimation mode to be used
in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.993.2.
The value of… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.20 |
| hwVOPUPBOConfProfUpboElmt This parameter defines the UPBO electrical length minimum threshold percentile
in percent used in the Alternative Electrical Length Estimation method (ELE-M1)
in clause 7.2.1.3.… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.21 |
| hwVOPGfastUPBOConfProfUpboKL This configuration parameter defines the G.fast electrical length expressed in dB at 1MHz, kl0,
configured by the DPU-MIB.The value ranges from 0 (coded as 0) to 128 dB (coded as … | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.22 |
| hwVOPGfastUPBOConfProfUpboKLF Defines the G.fast upstream power backoff force mode. | column | Xdsl2UpboKLF | .1.3.6.1.4.1.2011.6.144.1.1.8.1.23 |
| hwVOPGfastUPBOConfProfKlAuto This parameter defines the mode in which kl0 is computed when hwVOPGfastUPBOConfProfUpboKLF is auto.
Options:
1--max(kl0_CO,kl0_CPE)
2--min(kl0_CO,kl0_CPE)
3--kl0_CO
4--kl0_CPE | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.24 |
| hwVOPGfastUPBOConfProfPsdA This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off.A UPBOPSD shall consist of two parameters [a… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.25 |
| hwVOPGfastUPBOConfProfPsdB This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off.A UPBOPSD shall consist of two parameters [a… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.26 |
| hwVOPGfastUPBOConfProfUpboKLREF This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off, for the optional Equalized FEXT UPBO method.
The value ranges from 1.8 to … | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.27 |
| hwVOPUPBOConfProfDescription The hwVOPUPBOConfProfDescription contains an optional human readable description for the profile. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.1.8.1.3 |
| hwVOPUPBOConfProfUpboKL This configuration parameter defines the electrical length expressed in dB at 1MHz, kl0,
configured by the CO-MIB.The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.4 |
| hwVOPUPBOConfProfUpboKLF Defines the upstream power backoff force mode. | column | Xdsl2UpboKLF | .1.3.6.1.4.1.2011.6.144.1.1.8.1.5 |
| hwVOPUPBOConfProfKlAuto This parameter defines the mode in which kl0 is computed when hwVOPUPBOConfProfUpboKLF is auto.
Options:
1--max(kl0_CO,kl0_CPE)
2--min(kl0_CO,kl0_CPE)
3--kl0_CO
4--kl0_CPE | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.6 |
| hwVOPUPBOConfProfPsdBUs1 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US1.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.8 |
| hwVOPUPBOConfProfPsdAUs2 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US2.
A UPBOPSD defined… | column | 0.01 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.144.1.1.8.1.9 |