hwVOPSetupInmProfId
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.2.2.2.1.30
Object
column
r/w
Unsigned32
This object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.2.2.2.1.30- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwVOPSetupEntry
- Table
- hwVOPSetupTable
- Siblings
- 44
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-4294967294
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPSetupIndex The hwVOPSetupIndex identifies a row in the hwVOPSetupTable.
A row in this table may be indexed either by an ifIndex pattern, in case the 'direct'
attachment-method of VoP to xDSL… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.1 |
| hwVOPSetupUsRaRatio2 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #2
when performing rate adaptation on upstream.
The ratio refers to the available … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.10 |
| hwVOPSetupDsDataRateProfId2 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2.
If channel #2 is not being used this object sh… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.11 |
| hwVOPSetupDsRaRatio2 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #2
when performing rate adaptation on downstream.
The ratio refers to the availabl… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.12 |
| hwVOPSetupInpDelayProfId2 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2.
If channel #2 is not being used this object should be set t… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.13 |
| hwVOPSetupUsDataRateProfId3 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #3.
If channel #3 is not being used this object shou… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.14 |
| hwVOPSetupUsRaRatio3 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #3
when performing rate adaptation on upstream.
The ratio refers to the available … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.15 |
| hwVOPSetupDsDataRateProfId3 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #3.
If channel #3 is not being used this object sh… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.16 |
| hwVOPSetupDsRaRatio3 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #3
when performing rate adaptation on downstream.
The ratio refers to the availabl… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.17 |
| hwVOPSetupInpDelayProfId3 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #3.
If channel #3 is not being used this object should be set t… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.18 |
| hwVOPSetupUsDataRateProfId4 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #4.
If channel #4 is not being used this object shou… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.19 |
| hwVOPSetupRowStatus This object is used, in case the 'indirect' attachment-method of VoP to xDSL lines is implemented,
to create a new row, to modify a row, or delete an existing row in this table.
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.2 |
| hwVOPSetupUsRaRatio4 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #4
when performing rate adaptation on upstream.
The ratio refers to the available … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.20 |
| hwVOPSetupDsDataRateProfId4 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #4.
If channel #4 is not being used this object sh… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.21 |
| hwVOPSetupDsRaRatio4 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #4
when performing rate adaptation on downstream.
The ratio refers to the availabl… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.22 |
| hwVOPSetupInpDelayProfId4 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #4.
If channel #4 is not being used this object should be set t… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.23 |
| hwVOPSetupLSpectrumProfId This object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line.
This object has read-write … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.24 |
| hwVOPSetupUpboProfId This object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.25 |
| hwVOPSetupDpboProfId This object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line.
This objec… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.26 |
| hwVOPSetupRfiProfId This object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line.
This object has read-writ… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.27 |
| hwVOPSetupNoiseMarginProfId This object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line.
This object has re… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.28 |
| hwVOPSetupVNoiseProfId This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line.
This object ha… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.29 |
| hwVOPSetupDescription The hwVOPSetupDescription contains an optional human readable description for the profile.
This object is more likely to be used in case the 'indirect' attachment-method of VoP
to… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.3 |
| hwVOPSetupUsDataRateProf1Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #1.
This object has read-write acces… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.31 |
| hwVOPSetupDsDataRateProf1Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1.
This object has read-write acce… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.32 |
| hwVOPSetupInpDelayProf1Description This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1.
This object has read-write accessibility if … | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.33 |
| hwVOPSetupUsDataRateProf2Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2.
If channel #2 is not being used this object shou… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.34 |
| hwVOPSetupDsDataRateProf2Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2.
If channel #2 is not being used this object sh… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.35 |
| hwVOPSetupInpDelayProf2Description This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2.
If channel #2 is not being used this object should be set t… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.36 |
| hwVOPSetupLSpectrumProfDescription This object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line.
This object has read-write … | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.37 |
| hwVOPSetupUpboProfDescription This object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.38 |
| hwVOPSetupDpboProfDescription This object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line.
This objec… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.39 |
| hwVOPSetupUsDataRateProfId1 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #1.
This object has read-write access… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.4 |
| hwVOPSetupRfiProfDescription This object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line.
This object has read-writ… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.40 |
| hwVOPSetupNoiseMarginProfDescription This object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line.
This object has re… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.41 |
| hwVOPSetupVNoiseProfDescription This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line.
This object ha… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.42 |
| hwVOPSetupInmProfDescription This object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line.
This object has read… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.43 |
| hwVOPSetupSosProfId This object identifies a row in hwVOPSosConfProfTable used for
configuring the save our showtime parameters of the respective xDSL line.
If this leaf is not support this object sh… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.44 |
| hwVOPSetupSosProfDescription This object identifies a row in hwVOPSosConfProfTable used for
configuring the save our showtime parameters of the respective xDSL line.
If this leaf is not support this object sh… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.45 |
| hwVOPSetupUsRaRatio1 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #1
when performing rate adaptation on upstream.
The ratio refers to the available … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.5 |
| hwVOPSetupDsDataRateProfId1 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1.
This object has read-write acce… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.6 |
| hwVOPSetupDsRaRatio1 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #1
when performing rate adaptation on downstream.
The ratio refers to the availabl… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.7 |
| hwVOPSetupInpDelayProfId1 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1.
This object has read-write accessibility if … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.8 |
| hwVOPSetupUsDataRateProfId2 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2.
If channel #2 is not being used this object shou… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.9 |