hwVOPSetupDsRaRatio2
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.2.2.2.1.12
Object
column
r/w
Unsigned32
Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #2
when performing rate adaptation on downstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPSetupDsRaRatio2 is the ratio of excess data rate to
be assigned to all other bearer channels on downstream direction.
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.2.2.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwVOPSetupEntry
- Table
- hwVOPSetupTable
- Siblings
- 44
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPSetupIndex The hwVOPSetupIndex identifies a row in the hwVOPSetupTable.
A row in this table may be indexed either by an ifIndex pattern, in case the 'direct'
attachment-method of VoP to xDSL… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.1 |
| hwVOPSetupUsRaRatio2 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #2
when performing rate adaptation on upstream.
The ratio refers to the available … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.10 |
| hwVOPSetupDsDataRateProfId2 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2.
If channel #2 is not being used this object sh… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.11 |
| hwVOPSetupInpDelayProfId2 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2.
If channel #2 is not being used this object should be set t… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.13 |
| hwVOPSetupUsDataRateProfId3 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #3.
If channel #3 is not being used this object shou… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.14 |
| hwVOPSetupUsRaRatio3 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #3
when performing rate adaptation on upstream.
The ratio refers to the available … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.15 |
| hwVOPSetupDsDataRateProfId3 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #3.
If channel #3 is not being used this object sh… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.16 |
| hwVOPSetupDsRaRatio3 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #3
when performing rate adaptation on downstream.
The ratio refers to the availabl… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.17 |
| hwVOPSetupInpDelayProfId3 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #3.
If channel #3 is not being used this object should be set t… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.18 |
| hwVOPSetupUsDataRateProfId4 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #4.
If channel #4 is not being used this object shou… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.19 |
| hwVOPSetupRowStatus This object is used, in case the 'indirect' attachment-method of VoP to xDSL lines is implemented,
to create a new row, to modify a row, or delete an existing row in this table.
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.2 |
| hwVOPSetupUsRaRatio4 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #4
when performing rate adaptation on upstream.
The ratio refers to the available … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.20 |
| hwVOPSetupDsDataRateProfId4 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #4.
If channel #4 is not being used this object sh… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.21 |
| hwVOPSetupDsRaRatio4 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #4
when performing rate adaptation on downstream.
The ratio refers to the availabl… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.22 |
| hwVOPSetupInpDelayProfId4 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #4.
If channel #4 is not being used this object should be set t… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.23 |
| hwVOPSetupLSpectrumProfId This object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line.
This object has read-write … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.24 |
| hwVOPSetupUpboProfId This object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.25 |
| hwVOPSetupDpboProfId This object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line.
This objec… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.26 |
| hwVOPSetupRfiProfId This object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line.
This object has read-writ… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.27 |
| hwVOPSetupNoiseMarginProfId This object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line.
This object has re… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.28 |
| hwVOPSetupVNoiseProfId This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line.
This object ha… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.29 |
| hwVOPSetupDescription The hwVOPSetupDescription contains an optional human readable description for the profile.
This object is more likely to be used in case the 'indirect' attachment-method of VoP
to… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.3 |
| hwVOPSetupInmProfId This object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line.
This object has read… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.30 |
| hwVOPSetupUsDataRateProf1Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #1.
This object has read-write acces… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.31 |
| hwVOPSetupDsDataRateProf1Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1.
This object has read-write acce… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.32 |
| hwVOPSetupInpDelayProf1Description This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1.
This object has read-write accessibility if … | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.33 |
| hwVOPSetupUsDataRateProf2Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2.
If channel #2 is not being used this object shou… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.34 |
| hwVOPSetupDsDataRateProf2Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2.
If channel #2 is not being used this object sh… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.35 |
| hwVOPSetupInpDelayProf2Description This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2.
If channel #2 is not being used this object should be set t… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.36 |
| hwVOPSetupLSpectrumProfDescription This object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line.
This object has read-write … | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.37 |
| hwVOPSetupUpboProfDescription This object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.38 |
| hwVOPSetupDpboProfDescription This object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line.
This objec… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.39 |
| hwVOPSetupUsDataRateProfId1 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #1.
This object has read-write access… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.4 |
| hwVOPSetupRfiProfDescription This object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line.
This object has read-writ… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.40 |
| hwVOPSetupNoiseMarginProfDescription This object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line.
This object has re… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.41 |
| hwVOPSetupVNoiseProfDescription This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line.
This object ha… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.42 |
| hwVOPSetupInmProfDescription This object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line.
This object has read… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.43 |
| hwVOPSetupSosProfId This object identifies a row in hwVOPSosConfProfTable used for
configuring the save our showtime parameters of the respective xDSL line.
If this leaf is not support this object sh… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.44 |
| hwVOPSetupSosProfDescription This object identifies a row in hwVOPSosConfProfTable used for
configuring the save our showtime parameters of the respective xDSL line.
If this leaf is not support this object sh… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.45 |
| hwVOPSetupUsRaRatio1 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #1
when performing rate adaptation on upstream.
The ratio refers to the available … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.5 |
| hwVOPSetupDsDataRateProfId1 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1.
This object has read-write acce… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.6 |
| hwVOPSetupDsRaRatio1 Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #1
when performing rate adaptation on downstream.
The ratio refers to the availabl… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.7 |
| hwVOPSetupInpDelayProfId1 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1.
This object has read-write accessibility if … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.8 |
| hwVOPSetupUsDataRateProfId2 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2.
If channel #2 is not being used this object shou… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.9 |