hwVOPSNRMarginConfProfMinSnrmUs
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.1.14.1.5
Object
column
r/w
0.1 dB Unsigned32
The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU-R transmit power. If an increase of xTU-R transmit power is not possible, a loss-of-margin (LOM) defect occurs, the xTU-C shall fail and attempt to re-initialize and the NMS shall be notified. The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). A value of 0 means that there is no minimum. Unit: 0.1 dB.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.1.14.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.1 dB
- Parent
- hwVOPSNRMarginConfProfEntry
- Table
- hwVOPSNRMarginConfProfTable
- Siblings
- 44
Syntax
0.1 dB Unsigned32
Values & Constraints
Object Constraints
range: 0-310
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPSNRMarginConfProfIndex The hwVOPSNRMarginConfProfIndex identifies a row in the hwVOPSNRMarginConfProfTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.1 |
| hwVOPSNRMarginConfProfSnrModeDs This parameter enables the transmitter referred virtual noise in the downstream direction.
The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable. | column | Xdsl2LineSnrMode | .1.3.6.1.4.1.2011.6.144.1.1.14.1.10 |
| hwVOPSNRMarginConfProfSnrModeUs This parameter enables the transmitter referred virtual noise in the upstream direction.
The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable. | column | Xdsl2LineSnrMode | .1.3.6.1.4.1.2011.6.144.1.1.14.1.11 |
| hwVOPSNRMarginConfProfRaModeDs The mode of operation of a rate-adaptive xTU-C in the transmit direction. | column | Xdsl2RaMode | .1.3.6.1.4.1.2011.6.144.1.1.14.1.12 |
| hwVOPSNRMarginConfProfRaModeUs The mode of operation of a rate-adaptive xTU-R in the transmit direction. | column | Xdsl2RaMode | .1.3.6.1.4.1.2011.6.144.1.1.14.1.13 |
| hwVOPSNRMarginConfProfRaUsNrmDs The Downstream Up-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
If the downstream noise margin is above this value, and stays above… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.14 |
| hwVOPSNRMarginConfProfRaUsNrmUs The Upstream Up-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa.
If the upstream noise margin is above this value, and stays above it … | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.15 |
| hwVOPSNRMarginConfProfRaDsNrmDs The Downstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
If the downstream noise margin is below this value, and stays bel… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.16 |
| hwVOPSNRMarginConfProfRaDsNrmUs The Upstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa.
If the upstream noise margin is below this value, and stays below i… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.17 |
| hwVOPSNRMarginConfProfUsTimeDs The Downstream Up-Shift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
The interval of time that the downstream noise margin should stay above … | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.18 |
| hwVOPSNRMarginConfProfUsTimeUs The Upstream Up-Shift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa.
The interval of time the upstream noise margin should stay above the Upstr… | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.19 |
| hwVOPSNRMarginConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be de… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.144.1.1.14.1.2 |
| hwVOPSNRMarginConfProfDsTimeDs The Downstream Downshift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
The interval of time the downstream noise margin should stay below the … | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.20 |
| hwVOPSNRMarginConfProfDsTimeUs The Upstream Down-Shift Time Interval, to be used when hwVOPSNRMarginConfProfUsTimeUs is set to dynamicRa.
The interval of time the upstream noise margin should stay below the Ups… | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.21 |
| hwVOPGfastSNRMarginConfProfMinSnrmDs The G.fast minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase
the xTU-C transmit p… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.22 |
| hwVOPGfastSNRMarginConfProfMinSnrmUs The G.fast minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase
the xTU-R transmit p… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.23 |
| hwVOPGfastSNRMarginConfProfTargetSnrmDs The G.fast minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement,
to successfully complete initialization.
The target noise margin ranges from 0 … | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.24 |
| hwVOPGfastSNRMarginConfProfTargetSnrmUs The G.fast minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement,
to successfully complete initialization.
The target noise margin ranges from 0 … | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.25 |
| hwVOPGfastSNRMarginConfProfMaxSnrmDs The G.fast maximum Noise Margin the xTU-R receiver shall try to sustain.
If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce
the xTU-C transmit … | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.26 |
| hwVOPGfastSNRMarginConfProfMaxSnrmUs The G.fast maximum Noise Margin the xTU-C receiver shall try to sustain.
If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce
the xTU-R transmit … | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.27 |
| hwVOPGfastSNRMarginConfProfSnrModeDs obsolete This parameter enables the G.fast transmitter referred virtual noise in the downstream direction.
The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfPr… | column | Xdsl2LineSnrMode | .1.3.6.1.4.1.2011.6.144.1.1.14.1.28 |
| hwVOPGfastSNRMarginConfProfSnrModeUs obsolete This parameter enables the G.fast transmitter referred virtual noise in the upstream direction.
The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProf… | column | Xdsl2LineSnrMode | .1.3.6.1.4.1.2011.6.144.1.1.14.1.29 |
| hwVOPSNRMarginConfProfDescription The hwVOPSNRMarginConfProfDescription contains an optional human readable description for the profile. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.1.14.1.3 |
| hwVOPGfastSNRMarginConfProfRaModeDs obsolete The mode of operation of a rate-adaptive xTU-C in the transmit direction.
Options:
1. manual (1) - No Rate-Adaptation. The initialization process
attem… | column | HWVOPGfastRaMode | .1.3.6.1.4.1.2011.6.144.1.1.14.1.30 |
| hwVOPGfastSNRMarginConfProfRaModeUs obsolete The mode of operation of a rate-adaptive xTU-R in the transmit direction.
Options:
1. manual (1) - No Rate-Adaptation. The initialization process
attem… | column | HWVOPGfastRaMode | .1.3.6.1.4.1.2011.6.144.1.1.14.1.31 |
| hwVOPGfastSNRMarginConfProfRaUsNrmDs The G.fast Downstream Up-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa.
If the downstream noise margin is above this value, and… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.32 |
| hwVOPGfastSNRMarginConfProfRaUsNrmUs The G.fast Upstream Up-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa.
If the upstream noise margin is above this value, and sta… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.33 |
| hwVOPGfastSNRMarginConfProfRaDsNrmDs The G.fast Downstream Down-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa.
If the downstream noise margin is below this value, a… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.34 |
| hwVOPGfastSNRMarginConfProfRaDsNrmUs The G.fast Upstream Down-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa.
If the upstream noise margin is below this value, and s… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.35 |
| hwVOPGfastSNRMarginConfProfUsTimeDs The G.fast Downstream Up-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa.
The interval of time that the downstream noise margin should… | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.36 |
| hwVOPGfastSNRMarginConfProfUsTimeUs The G.fast Upstream Up-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa.
The interval of time the upstream noise margin should stay abo… | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.37 |
| hwVOPGfastSNRMarginConfProfDsTimeDs The G.fast Downstream Downshift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa.
The interval of time the downstream noise margin should sta… | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.38 |
| hwVOPGfastSNRMarginConfProfDsTimeUs The Upstream Down-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa.
The interval of time the upstream noise margin should stay below th… | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.39 |
| hwVOPSNRMarginConfProfMinSnrmDs The minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase
the xTU-C transmit power.
I… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.4 |
| hwVOPGfastSNRMarginConfProfTaretSnrmRmcDs Defines the downstream RMC noise margin that the FTU-R receiver shall achieve,
relative to the BER requirement, or better, to successfully complete initialization.
The target noi… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.40 |
| hwVOPGfastSNRMarginConfProfTaretSnrmRmcUs Defines the upstream RMC noise margin that the FTU-O receiver shall achieve,
relative to the BER requirement, or better, to successfully complete initialization.
The target noise… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.41 |
| hwVOPGfastSNRMarginConfProfMinSnrmRmcDs Defines the downstream minimum noise margin the FTU-R receiver tolerates for the RMC.
If the downstream RMC noise margin falls below this level, the FTU-R initiates the RPA proce… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.42 |
| hwVOPGfastSNRMarginConfProfMinSnrmRmcUs Defines the upstream minimum noise margin the FTU-O receiver tolerates for the RMC.
If the downstream RMC noise margin falls below this level, the FTU-O initiates the RPA procedu… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.43 |
| hwVOPGfastSNRMarginConfProfMaxBLRmcDs Defines the maximum allowed bit-loading for the downstream RMC sub-carriers. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.44 |
| hwVOPGfastSNRMarginConfProfMaxBLRmcUs Defines the maximum allowed bit-loading for the upstream RMC sub-carriers. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.45 |
| hwVOPSNRMarginConfProfTargetSnrmDs The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement
for each of the downstream bearer channels, to successfully complete initialization.
The… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.6 |
| hwVOPSNRMarginConfProfTargetSnrmUs The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement
for each of the upstream bearer channels, to successfully complete initialization.
The t… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.7 |
| hwVOPSNRMarginConfProfMaxSnrmDs The maximum Noise Margin the xTU-R receiver shall try to sustain.
If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce
the xTU-C transmit power t… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.8 |
| hwVOPSNRMarginConfProfMaxSnrmUs The maximum Noise Margin the xTU-C receiver shall try to sustain.
If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce
the xTU-R transmit power t… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.14.1.9 |