hwVOPDataRateConfProfMaxBer
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.1.2.1.8
Object
column
r/w
Xdsl2MaxBer
Maximum Bit Error Ratio of the bearer channel.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.1.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwVOPDataRateConfProfEntry
- Table
- hwVOPDataRateConfProfTable
- Siblings
- 21
Syntax
Xdsl2MaxBer
- Source
- Xdsl2MaxBer
- Base type
Enumeration
Values & Constraints
Type Values
1 | eminus3 |
2 | eminus5 |
3 | eminus7 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPDataRateConfProfIndex The hwVOPDataRateConfProfIndex identifies a row in the hwVOPDataRateConfProfTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.1 |
| hwVOPDataRateConfProfDsDataRate If retransmission is not used in a given transmit direction, This parameter is
a threshold on the net data rate downshift achieved over one or more bearer channel data
rate adap… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.10 |
| hwVOPDataRateConfProfDataPathMode The channel data path mode. | column | Xdsl2DataPathMode | .1.3.6.1.4.1.2011.6.144.1.1.2.1.11 |
| hwVOPDataRateConfProfMinEtrRtx If retransmission is used in a given transmit direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.
… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.12 |
| hwVOPDataRateConfProfMaxEtrRtx If retransmission is used in a given transmit direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.
… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.13 |
| hwVOPDataRateConfProfMaxNdrRtx If retransmission is used in a given transmit direction, this parameter specifies the
maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s.
Unit: … | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.14 |
| hwVOPDataRateConfProfMaxDataRateLowPwr Indicates the maximum Data Rate in Low Power state.
Unit: bits/second | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.15 |
| hwVOPDataRateConfProfL2MinDataRateToL0ActDataRate The ratio between data rate in low power state and data rate in normal state. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.16 |
| hwVOPDataRateConfProfMinSosBr This parameter specifies the minimum net data rate required for a valid SOS request.
The valid range of values is from 0 to 65535 Kbps.
Unit: Kbps | column | Kbps Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.17 |
| hwVOPGfastDataRateConfProfMinEtr This parameter specifies the minimum expected throughput for the bearer channel.
The values range in steps of 1000 bit/s.
Unit: bit/s | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.18 |
| hwVOPGfastDataRateConfProfMaxEtr obsolete This parameter specifies the G.fast maximum expected throughput for the bearer channel.
The values range in steps of 1000 bit/s.
Unit: bit/s | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.19 |
| hwVOPDataRateConfProfRowStatus The hwVOPDataRateConfProfRowStatus is used to create a new row or to modify
or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Bef… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.144.1.1.2.1.2 |
| hwVOPGfastDataRateConfProfMaxNdr This parameter specifies the G.fast maximum net data rate for the bearer channel.
The values range in steps of 1000 bit/s.
Unit: bit/s | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.20 |
| hwVOPGfastDataRateConfProfUsDataRate This parameter is a threshold on the G.fast net data rate upshift achieved over one or more
bearer channel data rate adaptations. An upshift rate change alarm (event) is triggere… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.21 |
| hwVOPGfastDataRateConfProfDsDataRate This parameter is a threshold on the G.fast net data rate downshift achieved over one or more
bearer channel data rate adaptations. A downshift rate change alarm (event) is trigg… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.22 |
| hwVOPDataRateConfProfDescription The hwVOPDataRateConfProfDescription contains an optional human readable description for the profile. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.1.2.1.3 |
| hwVOPDataRateConfProfMinDataRate If retransmission is not used in a given transmit direction,this parameter specifics
minimum data rate for the bearer channel. The rate is coded in steps of 1000 bit/s. | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.4 |
| hwVOPDataRateConfProfMinResDataRate The minimum reserved net data rate for the bearer channel, coded in bit/s.
This parameter is only used if the Rate Adaptation Mode in the direction
of the bearer channel (i.e., xd… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.5 |
| hwVOPDataRateConfProfMaxDataRate If retransmission is not used in a given transmit direction,this parameter specifics
maximum data rate for the bearer channel. The rate is coded in steps of 1000 bit/s. | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.6 |
| hwVOPDataRateConfProfMinDataRateLowPwr This parameter specifies the minimum net data rate for the bearer channel
as desired by the operator of the system during the low power state (L1/L2).
The power management low pow… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.7 |
| hwVOPDataRateConfProfUsDataRate If retransmission is not used in a given transmit direction, This parameter is
a threshold on the net data rate upshift achieved over one or more bearer channel data
rate adapta… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.9 |