hwVOPDataRateConfProfDsDataRate
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.1.2.1.10
Object
column
r/w
bit/s Unsigned32
If retransmission is not used in a given transmit direction, This parameter is a threshold on the net data rate downshift achieved over one or more bearer channel data rate adaptations. A downshift rate change alarm (event) is triggered when the actual data rate is below the data rate at the last entry into showtime by more than the threshold. The data rate threshold is coded in bit/s. Unit: bit/s.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.1.2.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bit/s
- Parent
- hwVOPDataRateConfProfEntry
- Table
- hwVOPDataRateConfProfTable
- Siblings
- 21
Syntax
bit/s Unsigned32
Values & Constraints
Object Constraints
range: 0-500000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPDataRateConfProfIndex The hwVOPDataRateConfProfIndex identifies a row in the hwVOPDataRateConfProfTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.1 |
| hwVOPDataRateConfProfDataPathMode The channel data path mode. | column | Xdsl2DataPathMode | .1.3.6.1.4.1.2011.6.144.1.1.2.1.11 |
| hwVOPDataRateConfProfMinEtrRtx If retransmission is used in a given transmit direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.
… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.12 |
| hwVOPDataRateConfProfMaxEtrRtx If retransmission is used in a given transmit direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.
… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.13 |
| hwVOPDataRateConfProfMaxNdrRtx If retransmission is used in a given transmit direction, this parameter specifies the
maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s.
Unit: … | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.14 |
| hwVOPDataRateConfProfMaxDataRateLowPwr Indicates the maximum Data Rate in Low Power state.
Unit: bits/second | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.15 |
| hwVOPDataRateConfProfL2MinDataRateToL0ActDataRate The ratio between data rate in low power state and data rate in normal state. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.16 |
| hwVOPDataRateConfProfMinSosBr This parameter specifies the minimum net data rate required for a valid SOS request.
The valid range of values is from 0 to 65535 Kbps.
Unit: Kbps | column | Kbps Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.17 |
| hwVOPGfastDataRateConfProfMinEtr This parameter specifies the minimum expected throughput for the bearer channel.
The values range in steps of 1000 bit/s.
Unit: bit/s | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.18 |
| hwVOPGfastDataRateConfProfMaxEtr obsolete This parameter specifies the G.fast maximum expected throughput for the bearer channel.
The values range in steps of 1000 bit/s.
Unit: bit/s | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.19 |
| hwVOPDataRateConfProfRowStatus The hwVOPDataRateConfProfRowStatus is used to create a new row or to modify
or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Bef… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.144.1.1.2.1.2 |
| hwVOPGfastDataRateConfProfMaxNdr This parameter specifies the G.fast maximum net data rate for the bearer channel.
The values range in steps of 1000 bit/s.
Unit: bit/s | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.20 |
| hwVOPGfastDataRateConfProfUsDataRate This parameter is a threshold on the G.fast net data rate upshift achieved over one or more
bearer channel data rate adaptations. An upshift rate change alarm (event) is triggere… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.21 |
| hwVOPGfastDataRateConfProfDsDataRate This parameter is a threshold on the G.fast net data rate downshift achieved over one or more
bearer channel data rate adaptations. A downshift rate change alarm (event) is trigg… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.22 |
| hwVOPDataRateConfProfDescription The hwVOPDataRateConfProfDescription contains an optional human readable description for the profile. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.1.2.1.3 |
| hwVOPDataRateConfProfMinDataRate If retransmission is not used in a given transmit direction,this parameter specifics
minimum data rate for the bearer channel. The rate is coded in steps of 1000 bit/s. | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.4 |
| hwVOPDataRateConfProfMinResDataRate The minimum reserved net data rate for the bearer channel, coded in bit/s.
This parameter is only used if the Rate Adaptation Mode in the direction
of the bearer channel (i.e., xd… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.5 |
| hwVOPDataRateConfProfMaxDataRate If retransmission is not used in a given transmit direction,this parameter specifics
maximum data rate for the bearer channel. The rate is coded in steps of 1000 bit/s. | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.6 |
| hwVOPDataRateConfProfMinDataRateLowPwr This parameter specifies the minimum net data rate for the bearer channel
as desired by the operator of the system during the low power state (L1/L2).
The power management low pow… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.7 |
| hwVOPDataRateConfProfMaxBer Maximum Bit Error Ratio of the bearer channel. | column | Xdsl2MaxBer | .1.3.6.1.4.1.2011.6.144.1.1.2.1.8 |
| hwVOPDataRateConfProfUsDataRate If retransmission is not used in a given transmit direction, This parameter is
a threshold on the net data rate upshift achieved over one or more bearer channel data
rate adapta… | column | bit/s Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.2.1.9 |