hwVOPActSetupUsRaRatio3
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.2.2.3.1.13
Object
column
Unsigned32
Rate Adaptation Ratio. The ratio (in %) that is taken into account for the bearer channel #3 when performing rate adaptation on upstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - hwVOPActSetupUsRaRatio3 is the ratio of excess data rate assigned to all other bearer channels on upstream direction. The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.2.2.3.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwVOPActSetupEntry
- Table
- hwVOPActSetupTable
- Siblings
- 42
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPActSetupIndex The hwVOPActSetupIndex identifies a row in this table. A row in this table is indexed by an ifIndex pattern. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.1 |
| hwVOPActSetupDsRaRatio2 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #2
when performing rate adaptation on downstream.
The ratio refers to the available data … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.10 |
| hwVOPActSetupInpDelayProfId2 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2
If channel #2 is not being used this object is set to 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.11 |
| hwVOPActSetupUsDataRateProfId3 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #3.
If channel #3 is not being used this object is s… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.12 |
| hwVOPActSetupDsDataRateProfId3 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #3.
If channel #3 is not being used this object is… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.14 |
| hwVOPActSetupDsRaRatio3 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #3
when performing rate adaptation on downstream.
The ratio refers to the available data … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.15 |
| hwVOPActSetupInpDelayProfId3 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #3
If channel #3 is not being used this object is set to 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.16 |
| hwVOPActSetupUsDataRateProfId4 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #4.
If channel #4 is not being used this object is s… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.17 |
| hwVOPActSetupUsRaRatio4 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #4
when performing rate adaptation on upstream.
The ratio refers to the available data ra… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.18 |
| hwVOPActSetupDsDataRateProfId4 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #4.
If channel #4 is not being used this object is… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.19 |
| hwVOPActSetupUsDataRateProfId1 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel number #1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.2 |
| hwVOPActSetupDsRaRatio4 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #4
when performing rate adaptation on downstream.
The ratio refers to the available data … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.20 |
| hwVOPActSetupInpDelayProfId4 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #4
If channel #4 is not being used this object is set to 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.21 |
| hwVOPActSetupLSpectrumProfId This object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.22 |
| hwVOPActSetupNoiseMarginProfId This object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.23 |
| hwVOPActSetupVNoiseProfId This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.24 |
| hwVOPActSetupUpboProfId This object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.25 |
| hwVOPActSetupDpboProfId This object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.26 |
| hwVOPActSetupRfiProfId This object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.27 |
| hwVOPActSetupInmProfId This object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.28 |
| hwVOPActSetupUsDataRateProf1Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel number #1. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.29 |
| hwVOPActSetupUsRaRatio1 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #1
when performing rate adaptation on upstream.
The ratio refers to the available data ra… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.3 |
| hwVOPActSetupDsDataRateProf1Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.30 |
| hwVOPActSetupInpDelayProf1Description This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.31 |
| hwVOPActSetupUsDataRateProf2Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.32 |
| hwVOPActSetupDsDataRateProf2Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.33 |
| hwVOPActSetupInpDelayProf2Description This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2 | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.34 |
| hwVOPActSetupLSpectrumProfDescription This object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.35 |
| hwVOPActSetupUpboProfDescription This object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.36 |
| hwVOPActSetupDpboProfDescription This object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.37 |
| hwVOPActSetupRfiProfDescription This object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.38 |
| hwVOPActSetupNoiseMarginProfDescription This object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.39 |
| hwVOPActSetupDsDataRateProfId1 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.4 |
| hwVOPActSetupVNoiseProfDescription This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.40 |
| hwVOPActSetupInmProfDescription This object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.41 |
| hwVOPActSetupSosProfId This object identifies a row in hwVOPSosConfProfTable used for
configuring the save our showtime parameters of the respective xDSL line.
If this leaf is not support this object sh… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.42 |
| hwVOPActSetupSosProfDescription This object identifies a row in hwVOPSosConfProfTable used for
configuring the save our showtime parameters of the respective xDSL line.
If this leaf is not support this object sh… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.43 |
| hwVOPActSetupDsRaRatio1 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #1
when performing rate adaptation on downstream.
The ratio refers to the available data … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.5 |
| hwVOPActSetupInpDelayProfId1 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.6 |
| hwVOPActSetupUsDataRateProfId2 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2.
If channel #2 is not being used this object is s… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.7 |
| hwVOPActSetupUsRaRatio2 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #2
when performing rate adaptation on upstream.
The ratio refers to the available data ra… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.8 |
| hwVOPActSetupDsDataRateProfId2 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2.
If channel #2 is not being used this object is… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.9 |