hwVOPActSetupDpboProfDescription
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.2.2.3.1.37
Object
column
OctetString
This object identifies a row in hwVOPDPBOConfProfTable used for configuring the downstream power back-off related parameters of the respective xDSL line.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.2.2.3.1.37- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwVOPActSetupEntry
- Table
- hwVOPActSetupTable
- Siblings
- 42
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPActSetupIndex The hwVOPActSetupIndex identifies a row in this table. A row in this table is indexed by an ifIndex pattern. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.1 |
| hwVOPActSetupDsRaRatio2 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #2
when performing rate adaptation on downstream.
The ratio refers to the available data … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.10 |
| hwVOPActSetupInpDelayProfId2 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2
If channel #2 is not being used this object is set to 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.11 |
| hwVOPActSetupUsDataRateProfId3 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #3.
If channel #3 is not being used this object is s… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.12 |
| hwVOPActSetupUsRaRatio3 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #3
when performing rate adaptation on upstream.
The ratio refers to the available data ra… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.13 |
| hwVOPActSetupDsDataRateProfId3 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #3.
If channel #3 is not being used this object is… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.14 |
| hwVOPActSetupDsRaRatio3 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #3
when performing rate adaptation on downstream.
The ratio refers to the available data … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.15 |
| hwVOPActSetupInpDelayProfId3 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #3
If channel #3 is not being used this object is set to 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.16 |
| hwVOPActSetupUsDataRateProfId4 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #4.
If channel #4 is not being used this object is s… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.17 |
| hwVOPActSetupUsRaRatio4 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #4
when performing rate adaptation on upstream.
The ratio refers to the available data ra… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.18 |
| hwVOPActSetupDsDataRateProfId4 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #4.
If channel #4 is not being used this object is… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.19 |
| hwVOPActSetupUsDataRateProfId1 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel number #1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.2 |
| hwVOPActSetupDsRaRatio4 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #4
when performing rate adaptation on downstream.
The ratio refers to the available data … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.20 |
| hwVOPActSetupInpDelayProfId4 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #4
If channel #4 is not being used this object is set to 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.21 |
| hwVOPActSetupLSpectrumProfId This object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.22 |
| hwVOPActSetupNoiseMarginProfId This object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.23 |
| hwVOPActSetupVNoiseProfId This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.24 |
| hwVOPActSetupUpboProfId This object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.25 |
| hwVOPActSetupDpboProfId This object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.26 |
| hwVOPActSetupRfiProfId This object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.27 |
| hwVOPActSetupInmProfId This object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.28 |
| hwVOPActSetupUsDataRateProf1Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel number #1. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.29 |
| hwVOPActSetupUsRaRatio1 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #1
when performing rate adaptation on upstream.
The ratio refers to the available data ra… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.3 |
| hwVOPActSetupDsDataRateProf1Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.30 |
| hwVOPActSetupInpDelayProf1Description This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.31 |
| hwVOPActSetupUsDataRateProf2Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.32 |
| hwVOPActSetupDsDataRateProf2Description This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.33 |
| hwVOPActSetupInpDelayProf2Description This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2 | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.34 |
| hwVOPActSetupLSpectrumProfDescription This object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.35 |
| hwVOPActSetupUpboProfDescription This object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.36 |
| hwVOPActSetupRfiProfDescription This object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.38 |
| hwVOPActSetupNoiseMarginProfDescription This object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.39 |
| hwVOPActSetupDsDataRateProfId1 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.4 |
| hwVOPActSetupVNoiseProfDescription This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.40 |
| hwVOPActSetupInmProfDescription This object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.41 |
| hwVOPActSetupSosProfId This object identifies a row in hwVOPSosConfProfTable used for
configuring the save our showtime parameters of the respective xDSL line.
If this leaf is not support this object sh… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.42 |
| hwVOPActSetupSosProfDescription This object identifies a row in hwVOPSosConfProfTable used for
configuring the save our showtime parameters of the respective xDSL line.
If this leaf is not support this object sh… | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.43 |
| hwVOPActSetupDsRaRatio1 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #1
when performing rate adaptation on downstream.
The ratio refers to the available data … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.5 |
| hwVOPActSetupInpDelayProfId1 This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.6 |
| hwVOPActSetupUsDataRateProfId2 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2.
If channel #2 is not being used this object is s… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.7 |
| hwVOPActSetupUsRaRatio2 Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #2
when performing rate adaptation on upstream.
The ratio refers to the available data ra… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.8 |
| hwVOPActSetupDsDataRateProfId2 This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2.
If channel #2 is not being used this object is… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.9 |