hwFaxParametersVbdCodec
HUAWEI-VOIP-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.36.1.26.8
Object
scalar
r/w
Enumeration
Indicates the codec of VBD. Options: 1. g711A(1) -G.711A 2. g711U(2) -G.711U
Context
- MIB
- HUAWEI-VOIP-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.36.1.26.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwFaxParametersTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | g711A |
2 | g711U |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwFAXTransfersMode deprecated Indicates the fax transmission mode.
Options:
1. thoroughly(1) -transparent transmission
2. selfT38(2) -auto-negotiation T.38
3. v3Flow(3) -V3 flow
4. selfswitchThoroughly(4) -sta… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.26.1 |
| hwFaxTransEvent Indicates the mode of sending fax event.
In controlled_by_MGC scheme, sending fax event via 2833 depends on the signalling.
In rfc2833 scheme, the device always sends the fax even… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.26.10 |
| hwT38FaxPortAdd2OrNot Indicates the T38 fax port.
Options:
1. rtpPortAdd0(1) -the udp port of FAX is as same as the voice's
2. rtpPortAdd2(2) -the udp port of FAX is the voice's add 2 | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.26.2 |
| hwFaxPacketInterval10msGlobal Enable packet interval of fax to use only 10ms or not.
Options:
1. enable(1) -enable
2. disable(2) -disable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.26.3 |
| hwFaxRFC2198 whether the fax support the RFC2198, 1:DisableRfc2198SmartStartup, 2:EnableRfc2198SmartStartup, 3: ImmediatelyStartupRFC2198 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.26.4 |
| hwFaxNegotiateMode The negotiate mode of fax.
Options:
1. selfswitch(1) -self switch
2. controledbyMGC(2) -controled by MGC | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.26.5 |
| hwFaxFlow The negotiate flow of fax.
Options:
1. v2(1) -Version 1
2. v3(2) -Version 2
3. v5(3) -Version 3 | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.26.6 |
| hwFaxWorkMode Indicates the fax transmission mode.
Options:
1. thoroughly(1) -use voice codec
2. t38(2) -use T.38 codec
Default: thoroughly(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.26.7 |
| hwFaxParametersVbdPtType Indicates the payload type of VBD.
Options:
1. static(1) -static payload type
2. dynamic(2) -dynamic payload type | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.26.9 |