raidControllerCreateLD

Create new logical drive on this RAID controller. The arguments are seperated by semicolons;
The arguments format is <option1>=<argument>;<option2>=<argument>;...;<optionN>=<argument>;
example: 
	rl=r1;pd=1,2;name=example;size=100.375g;ss=256k;sc=1;rp=ra;wp=wb;iop=cio;ap=rw;dcp=enabled;init=quick;
or  
	rl=r50;pd=1,2,3,4,5,6,7,8,9;name=example;size=500g;ss=1M;sc=3;rp=ra;wp=wb;iop=cio;ap=rw;dcp=enabled;init=quick;
              
Options and arguments:	
rl=<RAID level>                          The RAID level of logical drive. It is mandatory. When 'cachecade=1' is specified, RAID level 0/1 is valid.
	r0: RAID0
	r1: RAID1
	r5: RAID5
	r6: RAID6
	r10: RAID10
	r50: RAID50
	r60: RAID60
pd=<PD IDs>                              The physical drives IDs which participate this logical drive. It is mandatory. 
name=<Logical drive name>                The name of logical drive. The maximum is 15 printable ASCII characters except ';'. It is optional.
size=<Logical drive size>                The size of logical drive and unit can be 'm'(megabytes),'g'(gigabytes), or 't'(terabytes). 
                                         It is optional and not necessary when 'cachecade=1' is specified.
ss=<Logical drive strip size>            The strip size of logical drive. The valid values are 64k,128k,256k,512k,1M. 
                                         It is optional and not necessary when 'cachecade=1' is specified.
sc=<Span count>                          The span count of logical drive. The default is 1 when RAID level is RAID0/1/5/6 and 2 when RAID level is RAID10/50/60. 
                                         It is optional and not necessary when 'cachecade=1' is specified.
rp=<Read Policy>                         The read policy of logical drive. It is optional and not necessary when 'cachecade=1' is specified.
	ra: Read Ahead
	nra: No Read Ahead
wp=<Write Policy>                        The write policy of logical drive. It is optional.
	wt: Write Through
	wbwithbbu: Write Back with BBU
	wb: Write Back
iop=<IO Policy>                          The IO policy of logical drive. It is optional and not necessary when 'cachecade=1' is specified.
	cio: Cached IO
	dio: Direct IO
ap=<Access Policy>                       The access policy of logical drive. It is optional and not necessary when 'cachecade=1' is specified.
	rw: Read Write
	ro: Read only
	blocked: Blocked
dcp=<Disk Cache Policy>                  The disk cache policy of logical drive. It is optional and not necessary when 'cachecade=1' is specified.
	enabled: Enable disk cache
	disabled: Disable disk cache
	default: Unchanged(Disk's default)
init=<Init Type>                         The initialization type of logical drive. It is optional and not necessary when 'cachecade=1' is specified.
	no: No init
	quick: Quick init
	full: Full init
cachecade=1                              Logical drive is used for secondary cache. It is optional. It must be supported by RAID controller first.
              
Note: Character ';' is not valid for logical drive name string because it is used as separator.

MIB

HUAWEI-SERVER-IBMC-MIB

OID

.1.3.6.1.4.1.2011.2.235.1.1.36.50.1.25

Type

column

Access

readwrite

Status

current

Parent

raidControllerDescriptionEntry

Table

raidControllerDescriptionTable

Siblings

28