raidControllerBBUPresence
HUAWEI-SERVER-IBMC-MIB ·
.1.3.6.1.4.1.2011.2.235.1.1.36.50.1.16
Object
column
Enumeration
Information about RAID controller's BBU presence. 1: Absent 2: Present 255: Unknown
Context
- MIB
- HUAWEI-SERVER-IBMC-MIB
- OID
.1.3.6.1.4.1.2011.2.235.1.1.36.50.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- raidControllerDescriptionEntry
- Table
- raidControllerDescriptionTable
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raidControllerIndex Information about RAID controller index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.1 |
| raidControllerMemorySizeInMB Information about RAID controller memory size (MB). | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.10 |
| raidControllerDeviceInterface Information about RAID controller device interface type.
1: SPI
2: SAS-3G
3: SATA-1.5G
4: SATA-3G
5: SAS-6G
6: SAS-12G
255: Unknown | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.11 |
| raidControllerSASAddress Information about RAID controller SAS address. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.12 |
| raidControllerCachePinned Information about RAID controller if cache is pinned.
1: No
2: Yes
255: Unknown | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.13 |
| raidControllerMaintainPDFailHistory Information about RAID controller if maintain PD fail history.
1: No
2: Yes
255: Unknown | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.14 |
| raidControllerDDREccCount Information about RAID controller DDR ECC count. | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.15 |
| raidControllerBBUType Information about RAID controller' BBU type. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.17 |
| raidControllerBBUHealthStatus Information about RAID controller's BBU health status.
bit0: 1 - voltage is low
bit1: 1 - need replace pack
bit2: 1 - learn cycle failed
bit3: 1 - learn cycle timeout
bit4: 1 - pa… | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.18 |
| raidControllerMinStripSupportInBytes Information about the minimum strip size that RAID controller support. | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.19 |
| raidControllerName Information about RAID controller name. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.2 |
| raidControllerMaxStripSupportInBytes Information about the maximum strip size that RAID controller support. | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.20 |
| raidControllerCopybackEnable Information about the copyback state of RAID controller.
1: Unknown (read only)
2: Disabled
3: Enabled | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.21 |
| raidControllerSMARTerCopybackEnable Information about the copyback state on SMART error of RAID controller.
1: Unknown (read only)
2: Disabled
3: Enabled
Note: Set action is available only when raidCo… | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.22 |
| raidControllerJBODEnable Information about the JBOD state of RAID controller.
1: Unknown (read only)
2: Disabled
3: Enabled | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.23 |
| raidControllerRestoreSettings Restore RAID controller settings (write only). The argument is:
1: Restore RAID controller settings.
others: invalid | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.24 |
| raidControllerCreateLD Create new logical drive on this RAID controller. The arguments are seperated by semicolons;
The arguments format is <option1>=<argument>;<option2>=<argument>;...;<optionN>=<argum… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.25 |
| raidControllerAddLD Add logical drive on array on this RAID controller. The arguments are seperated by semicolons;
The arguments format is <option1>=<argument>;<option2>=<argument>;...;<optionN>=<arg… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.26 |
| raidControllerDriverName Information about RAID controller driver name. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.27 |
| raidControllerDriverVersion Information about RAID controller driver version | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.28 |
| raidControllerSupportedRAIDLevels Information about RAID controller supported levels. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.29 |
| raidControllerType Information about RAID controller type. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.3 |
| raidControllerComponentName Information about RAID controller component name. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.4 |
| raidControllerSupportOOBManagement Information about RAID controller if support OOB management.
1: No
2: Yes | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.5 |
| raidControllerMode Information about RAID controller mode.
1: None-RAID
2: RAID
255: Unknown | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.6 |
| raidControllerHealthStatus Information about RAID controller health status.
bit0: 1- memory correctable error
bit1: 1- memory uncorrectable error
bit2: 1- memory ECC error reached limit
bit3: 1- NVRAM uncor… | column | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.7 |
| raidControllerFwVersion Information about RAID controller firmware version. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.8 |
| raidControllerNVDataVersion Information about RAID controller NVData version. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.36.50.1.9 |