hwRingCheckResumeInterval
HUAWEI-RSTP-EXT-MIB ·
.1.3.6.1.4.1.2011.5.21.1.11
Object
scalar
r/w
Integer32
Indicates the interval time of re-activating the ring check port/ONT/CNU. 0 means to disable the function of automatically re-activating a port/ONT/CNU. 1-1440 indicates the waiting period for the port/ONT/CNU to be automatically re-activated after it is automatically deactivated. Unit: minute Range: 0-1440 Default: 0
Context
- MIB
- HUAWEI-RSTP-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.21.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwRstpMibObject
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1440
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwdot1dStpAdminStatus Enabling/Disabling Spanning Tree of the Switch
Options:
1. enabled(1)
2. disabled(2)
Default: disabled(2) | scalar | EnabledStatus | .1.3.6.1.4.1.2011.5.21.1.1 |
| hwRingCheckPrivateEthtype Indicates the private Ethernet protocol type of the user-side ring check packet.
Range: 1536-65535
Default: 33536 | scalar | Unsigned32 | .1.3.6.1.4.1.2011.5.21.1.10 |
| hwRingCheckRecordTable Used to query the deactivation information of ring check,
The index of this table is hwRingCheckRecordIndex. | table | - | .1.3.6.1.4.1.2011.5.21.1.12 |
| hwRingCheckTrapNotify Indicates the trap notification mode of ring check on the user side.
Options:
1. event(1) -indicates the way of trap is event
2. alarm(2) -indicates the way of trap is alarm
Defau… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.21.1.13 |
| hwRingCheckUplinkDetectionControl Configure the ring check function on the network side.
Options:
1. enabled(1)
2. disabled(2)
Default: disabled(2) | scalar | EnabledStatus | .1.3.6.1.4.1.2011.5.21.1.14 |
| hwRingCheckCascadeDetectionControl Configure the ring check function on the cascading side.
Options:
1. enabled(1)
2. disabled(2)
Default: disabled(2) | scalar | EnabledStatus | .1.3.6.1.4.1.2011.5.21.1.15 |
| hwRingCheckOnuSingleTestOperate Starts or stops a single ONU ring check.
Options:
1. start(1) -indicates starting a single ONU ring check.
2. stop(2) -indicates stopping a single ONU ring check.
Default: stop(… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.21.1.16 |
| hwRingCheckOnuSingleTestOvertime Duration for a single ONU ring check, unit: hour.
-1 indicates an invalid value.
Default : 1 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.21.1.17 |
| hwRingCheckOnuSingleTestStartTime Start time of a single ONU ring check.
1970-1-1,0:0:0.0 indicates that the single ONU ring check does not start. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.21.1.18 |
| hwRingCheckOnuSingleTestStopTime Stop time of a single ONU ring check.
Except for the completed single ONU ring check, 1970-1-1,0:0:0.0 is displayed. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.21.1.19 |
| hwdot1dStpForceVersion Configuring RSTP Operating Mode,
RSTP is compatible with STP. If a bridge running STP is in
this switched network, this can be used to set RSTP to work
in STP compatible mode or… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.21.1.2 |
| hwRingCheckOnuSingleTestTargetType Target type of a single ONU ring check.
Options:
1. invalid(-1) -indicates a invalid target type.
2. all(1) -indicates all boards are checked.
3. slot(2) -indicates a… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.21.1.20 |
| hwRingCheckOnuSingleTestTargetSlot Indicates the object specified in a single ONU ring network detection.
This node is valid only when hwRingCheckOnuSingleTestTargetType is set to slot.
-1 indicates an invalid va… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.21.1.21 |
| hwRingCheckOnuSingleTestReportTable Used to query the report of a single ONU ring check.
The index of this table is hwRingCheckOnuSingleTestReportIndex. | table | - | .1.3.6.1.4.1.2011.5.21.1.22 |
| hwdot1dStpDiameter Configuring Diameter of the Switched Network,
Switched network is a loop-free tree structure in which any
two PCs are connected by a series of bridge… | scalar | Integer32 | .1.3.6.1.4.1.2011.5.21.1.3 |
| hwdot1dStpRootBridgeAddress MAC Address of the root bridge. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.21.1.4 |
| hwdot1dStpPortXTable This table describes rstp port expand table,
The index of this table is is not supported. | table | - | .1.3.6.1.4.1.2011.5.21.1.5 |
| hwdot1dStpPortStatTable This table describes rstp port statistic table,
The index of this table is not supported. | table | - | .1.3.6.1.4.1.2011.5.21.1.6 |
| hwRingCheckAdminStatus Indicates the status of the ring check on the user side.
Options:
1. enabled(1)
2. disabled(2)
Default: disabled(2) | scalar | EnabledStatus | .1.3.6.1.4.1.2011.5.21.1.7 |
| hwBpduTunnelAdminStatus Enabling/Disabling BPDU tunneling function.
Options:
1. enabled(1)
2. disabled(2)
Default: disabled(2) | scalar | EnabledStatus | .1.3.6.1.4.1.2011.5.21.1.8 |
| hwRingCheckModeStatus Set ring check mode.
Options:
1. privateBpdu(0) -indicates the ring check mode is private-bpdu
2. privateEthtype(1) -indicates the ring check mode is private-ethtype
Default: pr… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.21.1.9 |