hwRateLimitYellowRemarkDscp
HUAWEI-QOS-MIB ·
.1.3.6.1.4.1.2011.5.2.3.1.24
Object
column
r/w
Integer32
Indicates the new DSCP value that is preset when the preset traffic is marked to yellow. -1 indicates an invalid value
Context
- MIB
- HUAWEI-QOS-MIB
- OID
.1.3.6.1.4.1.2011.5.2.3.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwRateLimitEntry
- Table
- hwRateLimitTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwRateLimitAclIndex The delivery entry index of an ACL rule used for traffic limitation is a delivery record entry index used by software,
which is meaningless to users. The index is used in hwRateL… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.2.3.1.1 |
| hwRateLimitTargetRate Indicates the target value of traffic limitation on a port or a specified slot.
Range: 64-10000000 (which must be an integer multiple of 64)
Unit: Kbit/s.
0 indicates an invalid… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.10 |
| hwRateLimitExceedDrop Indicates the action when traffic exceeds the target value.
Options:
1.true(1) -discard
2.false(2) -not discard
If this leaf is not specified, the default value is tru… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.2.3.1.11 |
| hwRateLimitExceedDscp Describes the specified DSCP priority when configuring the DSCP priority of the
packets that match the ACL rule. The larger the DSCP value is, the higher the priority is.
Range: … | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.12 |
| hwRateLimitRuntime Describes whether the ACL rule for traffic limitation delivered to a specified port or a specified slot takes effect.
This leaf is read-only.
Options:
1. true(1) -if the ACL … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.2.3.1.13 |
| hwRateLimitRowStatus Indicates the row status.
It is used for delivering an ACL rule for traffic limitation to a specified port or a specified slot and
deleting the delivered ACL rule on a port or a… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.2.3.1.14 |
| hwRateLimitCir Indicates the Committed information rate for rate limiting.
Value Rage: 0, 64-10240000.
0 indicates an invalid value.
unit: Kbit/s | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.15 |
| hwRateLimitCbs Indicates the Committed burst size for rate limiting.
Value Rage: 0, 2000-10240000.
If not set, the value is min(2000+hwRateLimitCir*32, 1024000).
0 indicates an invalid value.
un… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.16 |
| hwRateLimitPir Indicates the Peak information rate for rate limiting.
If not set, the value is min(hwRateLimitCir*2, 10240000).
PIR must not be less than CIR.
Value Rage: 0, 64-10240000.
0 indic… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.17 |
| hwRateLimitPbs Indicates the Committed information rate for rate limiting.
If not set, the value is min(2000+hwRateLimitPir*32, 1024000).
Value Rage: 0, 2000-10240000.
0 indicates an invalid val… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.18 |
| hwRateLimitIpv6AclNum Indicates the basic or advanced ACLv6 rule group that is used when
a basic or advanced ACLv6 rule for traffic limitation is delivered to a specified port or a specified slot.
Ran… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.19 |
| hwRateLimitIfIndex Specifies the index of a port or a slot for traffic limitation.
It uniquely identifies a port or a slot.
The value and algorithm are the same as those of ifIndex.
… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.3.1.2 |
| hwRateLimitIpv6AclSubitem Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule
for traffic limitation is delivered to a specified port or a specified slot.
This lea… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.3.1.20 |
| hwRateLimitRedDrop Indicates the action when traffic is marked to red.
TRUE(1): discard the packets.
FALSE(2): don't discard the packets | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.2.3.1.21 |
| hwRateLimitRedRemarkDscp Indicates the new DSCP value that is preset when the preset traffic is marked to red.
-1 indicates an invalid value | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.22 |
| hwRateLimitYellowDrop Indicates the action when traffic is marked to yellow.
TRUE(1): discard the packets.
FALSE(2): don't discard the packets | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.2.3.1.23 |
| hwRateLimitDirection Indicates the direction where an ACL rule used for traffic limitation takes effect.
Currently, only the inbound direction is supported.
Options:
1. invalid(0) -indicates an in… | column | Enumeration | .1.3.6.1.4.1.2011.5.2.3.1.3 |
| hwRateLimitUserAclNum Describes the user-defined ACL rule group that is used when
a user-defined ACL rule for traffic limitation is delivered to a specified port or a specified slot.
Range: 0, 5000-59… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.4 |
| hwRateLimitUserAclSubitem Describes the user-defined ACL rule that is used when a user-defined ACL rule for traffic limitation is delivered to a specified port or a specified slot.
This leaf must be used … | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.3.1.5 |
| hwRateLimitIpAclNum Describes the basic or advanced ACL rule group that is used when
a basic or advanced ACL rule for traffic limitation is delivered to a specified port or a specified slot.
Range: … | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.6 |
| hwRateLimitIpAclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule
for traffic limitation is delivered to a specified port or a specified slot.
This leaf mu… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.3.1.7 |
| hwRateLimitLinkAclNum Describes the L2 ACL rule group that is used when an L2 ACL rule for traffic limitation is delivered to a specified port or a specified slot.
Range: 0, 4000-4999
Make sure that th… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.3.1.8 |
| hwRateLimitLinkAclSubitem Describes the L2 ACL rule that is used when an L2 ACL rule for traffic limitation is delivered to a specified port or a specified slot.
This leaf must be used together with hwRat… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.3.1.9 |