hwQinQSubIfMapTable
HUAWEI-QINQ-MIB ·
.1.3.6.1.4.1.2011.5.25.116.2.20
Object
table
The table is used to configure QinQ-mapping function in sub interface, then packets transmitted from this sub interface input with one or two tags will be mapped to other tag or tags.
Context
- MIB
- HUAWEI-QINQ-MIB
- OID
.1.3.6.1.4.1.2011.5.25.116.2.20- Type
- table
- Status
- current
- Parent
- hwQinQMngObjects
- Siblings
- 20
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwQinQBpduTunnelTable QinQ-port configuration table. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.1 |
| hwQinQModeCfgTable The table contains mode type and ethernet encapsulation type. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.10 |
| hwQinQCtrlVlanCfgTable The control-vlan id and control-vlan's attributes can be configured in sub interface.
You must designate control-vlan as QinQ or Dot1q before configuring QinQ-termination
functio… | table | - | .1.3.6.1.4.1.2011.5.25.116.2.11 |
| hwQinQGroupCfgTable The group-management id and group's attributes can be configured in sub interface. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.12 |
| hwQinQAsymmetryCfgTable The table to configure asymmetry attribution of the interface. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.13 |
| hwQinQRemarkCfgTable Interface remark config. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.14 |
| hwBpduTunnelIngressTable The table of bpdu tunnel ingress. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.15 |
| hwBpduTunnelEgressTable The table of bpdu tunnel egress. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.16 |
| hwBpduTunnelVlanTable The table of port bpdu tunnel. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.17 |
| hwBpduTunnelTable The table of bpdu tunnel. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.18 |
| hwQinQSwapCfgTable This table describes the vlan swap configurations of interfaces. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.19 |
| hwQinQSubIfVlanStackingTable Used to configure packets'vlan stacking in sub interface, receive one-tag
packets and transmit two-tag packets, where the outer-tag inserted is in
hwQinQSubIfVlanStackingTable. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.2 |
| hwQinQStackingVlanCfgTable QinQ Stacking Vlan configuration table. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.21 |
| hwQinQSubIfStackingStatTable When a sub interface configured QinQ-stacking function, hwQinQSubIfStackingStatTable is used to
statistic total number of the out packets and in packets. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.3 |
| hwQinQSubIfTermTable The table is used to configure QinQ-termination function in sub interface, then packets
transmitted from this sub interface input with two tags will be terminated. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.4 |
| hwQinQSubIfTermStatTable When a sub interface configured QinQ-termination function, hwQinQSubIfTermStatTable used to
statistic total number of the out packets and in packets. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.5 |
| hwQinQStaticARPCfgTable The table is used to configure QinQ static ARP. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.6 |
| hwQinQStaticMACCfgTable The table is used to configure static MAC. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.7 |
| hwQinQSubIfDot1qTermTable Used to configure Dot1q-termination function in sub interface ,then packets
transmitted from this sub interface input with one tag will be terminated. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.8 |
| hwQinQSubIfDot1qTermStatTable When a sub interface configured Dot1q-termination, hwQinQSubIfDot1qTermStatTable used to
statistic total number of the out packets and in packets. | table | - | .1.3.6.1.4.1.2011.5.25.116.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwQinQSubIfMapEntry The entry of an interface enabled the QinQ-Map function. | row | - | .1.3.6.1.4.1.2011.5.25.116.2.20.1 |