HUAWEI-QINQ-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
21
Rows
21
Columns
137

hwQinQBpduTunnelTable

table
.1.3.6.1.4.1.2011.5.25.116.2.1 · 1 row entry · 10 columns
Open in standard view 
QinQ-port configuration table.
hwQinQBpduTunnelEntry entry .1.3.6.1.4.1.2011.5.25.116.2.1.1
The entry of an interface enabled the QinQ function.
Indexes
hwQinQBpduTunnelIndex
Column Syntax OID
hwQinQBpduTunnelIndex
Index number of the interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.1.1.1
hwQinQEtherEncpsType
The value of tag type is encapsulated in the head of the Ethernet frame
To distinguish the encapsulated mode between the 802.1Q and QinQ.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.2011.5.25.116.2.1.1.2
hwQinQBpduTunnelEnableOneQBpduTunnel
The value indicates whether the 1Q-bpdutunnel is opened,
If hwQinQBpduTunnelEnableTwoQBpduTunnel is enabling, then this value should be disable.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.1.1.3
hwQinQBpduTunnelEnableBpduTag
Whether to enable the setting of BPDU Tunnel tag. Default is disabled.
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.1.1.4
hwQinQBpduTunnelEnableTwoQBpduTunnel
The value indicates whether the 2Q-bpdutunnel is opened,
If hwQinQBpduTunnelEnableOneQBpduTunnel is enabling, then this value should be disable.
Default is disabled.
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.1.1.5
hwQinQBpduTunnelCustomerBpduTag
The tag is inserted into the head of the BPDU ,to support
that can be transmitted through the services' network.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.1.1.6
hwQinQBpduTunnelCustomerBpduTagListLow
The list describes accessible bode from different vlan (0 to 2047).
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.116.2.1.1.7
hwQinQBpduTunnelCustomerBpduTagListHigh
The list describes accessible bpdu from different vlan (2048 to 4094).
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.116.2.1.1.8
hwQinQRemarkOuterTpid
The value indicates the TPID of outer tag of packets that have two tag and output from the output interface of vlan-switch,
If hwQinQEtherEncpsType is enabling, then this value should be 0xffff.
Enumerationr/w
Enumerated Values:
1hexffff
2hex88a8
3hex9100
4hex8100
 .1.3.6.1.4.1.2011.5.25.116.2.1.1.9
hwQinQBpduTunnelEnableBpduFilter
The value indicates whether the BPDU filter function is enabled.
If hwQinQBpduTunnelEnableBpduFilter is enabled, then this value should be enable.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.1.1.10

hwQinQSubIfVlanStackingTable

table
.1.3.6.1.4.1.2011.5.25.116.2.2 · 1 row entry · 6 columns
Open in standard view 
Used to configure packets'vlan stacking in sub interface, receive one-tag
packets and transmit two-tag packets, where the outer-tag inserted is in
hwQinQSubIfVlanStackingTable.
hwQinQSubIfVlanStackingEntry entry .1.3.6.1.4.1.2011.5.25.116.2.2.1
The entry of an interface enabled the QinQ-stacking function.
Indexes
hwQinQSubIfStackingIfIndex hwQinQSubIfStackingCEVlanStart
Column Syntax OID
hwQinQSubIfStackingIfIndex
Index number of the QinQ-stacking interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.2.1.1
hwQinQSubIfStackingCEVlanStart
When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the
start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.2.1.2
hwQinQSubIfStackingCEVlanEnd
When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the
start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id.
Q-BRIDGE-MIBVlanIdr/w
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.2.1.3
hwQinQSubIfStackGroupId
Group-management id.
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.116.2.2.1.4
hwQinQSubIfStackingRowStatus
Used for controlling the creation and deletion of this
row. All writable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.2.1.5
hwQinQSubIfStackingPEVlan
PE vlan id.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.116.2.2.1.6

hwQinQSubIfStackingStatTable

table
.1.3.6.1.4.1.2011.5.25.116.2.3 · 1 row entry · 13 columns
Open in standard view 
When a sub interface configured QinQ-stacking function, hwQinQSubIfStackingStatTable is used to
statistic total number of the out packets and in packets.
hwQinQSubIfStackingStatEntry entry .1.3.6.1.4.1.2011.5.25.116.2.3.1
The entry of an interface enabled the QinQ-stacking function.
Indexes
hwQinQSubIfStackingStatIfIndex hwQinQSubIfStackingStatCEVlan
Column Syntax OID
hwQinQSubIfStackingStatIfIndex
Index number of the QinQ-stacking interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.1
hwQinQSubIfStackingStatCEVlan
This object indicates the CE VLAN ID of the sub-interface configured with VLAN stacking.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.2
hwQinQSubIfStackStatGroupId
The group-management id. The statistic number of packets can not get if
the statistic funtion is not enabled.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.3
hwQinQSubIfStackingStatOutPackets
Total number of out packets of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.4
hwQinQSubIfStackingStatOutBytes
Total number of out bytes of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.5
hwQinQSubIfStackingStatInPackets
Total number of in packets of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.6
hwQinQSubIfStackingStatInBytes
Total number of in bytes of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.7
hwQinQSubIfStackStatOutBdPackets
Total number of broadcast packets transmitted out of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.8
hwQinQSubIfStackStatInBdPackets
Total number of broadcast packets received from the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.9
hwQinQSubIfStackStatOutMuPackets
Total number of multicast packets transmitted out of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.10
hwQinQSubIfStackStatInMuPackets
Total number of multicast packets received from the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.11
hwQinQSubIfStackStatOutUniPackets
Total number of unicast packets transmitted out of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.12
hwQinQSubIfStackStatInUniPackets
Total number of unicast packets received from the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.3.1.13

hwQinQSubIfTermTable

table
.1.3.6.1.4.1.2011.5.25.116.2.4 · 1 row entry · 7 columns
Open in standard view 
The table is used to configure QinQ-termination function in sub interface, then packets
transmitted from this sub interface input with two tags will be terminated.
hwQinQSubIfTermEntry entry .1.3.6.1.4.1.2011.5.25.116.2.4.1
The entry of an interface enabled the QinQ-termination function.
Indexes
hwQinQSubIfTermIfIndex hwQinQSubIfTermPEVlan hwQinQSubIfTermCEVlanStart
Column Syntax OID
hwQinQSubIfTermIfIndex
Index number of the QinQ VLAN tag termination sub-interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.4.1.1
hwQinQSubIfTermPEVlan
Outer VLAN ID of the packets which have two tags before being terminated.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.4.1.2
hwQinQSubIfTermCEVlanStart
When configure CE VLAN as a range, hwQinQSubIfTermCEVlanStart
is the start VLAN ID and hwQinQSubIfTermCEVlanEnd is the end VLAN ID.
Q-BRIDGE-MIBVlanIdOrNone
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.25.116.2.4.1.3
hwQinQSubIfTermCEVlanEnd
When configure CE VLAN as a range, hwQinQSubIfTermCEVlanStart is
the start VLAN ID and hwQinQSubIfTermCEVlanEnd is the end VLAN ID.
Q-BRIDGE-MIBVlanIdr/w
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.4.1.4
hwQinQSubIfTermGroupId
Group-management id.
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.116.2.4.1.5
hwQinQSubIfTermRowStatus
Used for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this objec…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.4.1.6
hwQinQSubIfTermCeVlanAny
The QinQ VLAN tag termination sub-interface permits
packets carrying any inner VLAN tag.
Enumerationr/w
Enumerated Values:
1anyother
 .1.3.6.1.4.1.2011.5.25.116.2.4.1.7

hwQinQSubIfTermStatTable

table
.1.3.6.1.4.1.2011.5.25.116.2.5 · 1 row entry · 14 columns
Open in standard view 
When a sub interface configured QinQ-termination function, hwQinQSubIfTermStatTable used to
statistic total number of the out packets and in packets.
hwQinQSubIfTermStatEntry entry .1.3.6.1.4.1.2011.5.25.116.2.5.1
The entry of an interface enabled the QinQ-termination function.
Indexes
hwQinQSubIfTermStatIfIndex hwQinQSubIfTermStatPEVlan hwQinQSubIfTermStatCEVlan
Column Syntax OID
hwQinQSubIfTermStatIfIndex
Index number of the QinQ-termination interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.1
hwQinQSubIfTermStatPEVlan
Outer vlan in packets which input the QinQ sub interface,
used to indicate the packets as an index.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.2
hwQinQSubIfTermStatCEVlan
Inner vlan in packets which input the QinQ sub interface,
used to indicate the packets as an index.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.3
hwQinQSubIfTermStatGroupId
The group-management id. The statistic number of packets can not get if
the statistic funtion is not enabled.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.4
hwQinQSubIfTermStatOutPackets
Total number of out packets of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.5
hwQinQSubIfTermStatOutBytes
Total number of out bytes of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.6
hwQinQSubIfTermStatInPackets
Total number of in packets of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.7
hwQinQSubIfTermStatInBytes
Total number of in bytes of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.8
hwQinQSubIfTermStatOutBdPackets
Total number of broadcast packets transmitted out of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.9
hwQinQSubIfTermStatInBdPackets
Total number of broadcast packets received from the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.10
hwQinQSubIfTermStatOutMuPackets
Total number of multicast packets transmitted out of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.11
hwQinQSubIfTermStatInMuPackets
Total number of multicast packets received from the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.12
hwQinQSubIfTermStatOutUniPackets
Total number of unicast packets transmitted out of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.13
hwQinQSubIfTermStatInUniPackets
Total number of unicast packets received from the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.5.1.14

hwQinQStaticARPCfgTable

table
.1.3.6.1.4.1.2011.5.25.116.2.6 · 1 row entry · 6 columns
Open in standard view 
The table is used to configure QinQ static ARP.
hwQinQStaticARPCfgEntry entry .1.3.6.1.4.1.2011.5.25.116.2.6.1
The entry of an interface enabled the QinQ function.
Indexes
hwQinQStaticARPCfgIfIndex hwQinQStaticARPCfgIp
Column Syntax OID
hwQinQStaticARPCfgIfIndex
The interface's Index.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.6.1.1
hwQinQStaticARPCfgIp
The IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.116.2.6.1.2
hwQinQStaticARPCfgMac
The MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.116.2.6.1.3
hwQinQStaticARPCfgVlan
The first vlan id.
Q-BRIDGE-MIBVlanIdr/w
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.6.1.4
hwQinQStaticARPCfgCEVlan
The second vlan id.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.116.2.6.1.5
hwQinQStaticARPCfgRowStatus
Used for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this objec…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.6.1.6

hwQinQStaticMACCfgTable

table
.1.3.6.1.4.1.2011.5.25.116.2.7 · 1 row entry · 9 columns
Open in standard view 
The table is used to configure static MAC.
hwQinQStaticMACCfgEntry entry .1.3.6.1.4.1.2011.5.25.116.2.7.1
The entry of an interface enabled the QinQ function.
Indexes
hwQinQStaticMACCfgMac hwQinQStaticMACCfgVsiName hwQinQStaticMACCfgVlan
Column Syntax OID
hwQinQStaticMACCfgMac
The MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.116.2.7.1.1
hwQinQStaticMACCfgVlan
Vlan id that the MAC address belongs to.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.7.1.2
hwQinQStaticMACCfgVsiName
Name of VSI that the MAC address belongs to.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.116.2.7.1.3
hwQinQStaticMACCfgPEVlan
PE vlan id for a Network Management Application attempts to configure hwQinQStaticMACCfgTable.
Q-BRIDGE-MIBVlanIdr/w
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.7.1.4
hwQinQStaticMACCfgCEVlan
CE vlan id.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.116.2.7.1.5
hwQinQStaticMACCfgType
The type of the MAC.
Enumerationr/w
Enumerated Values:
0invalid
1dynamid
2static
3blackhole
4toobig
 .1.3.6.1.4.1.2011.5.25.116.2.7.1.6
hwQinQStaticMACCfgIfIndex
Index number of the interface.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.7.1.7
hwQinQStaticMACCfgFlag
The config type.
Enumerationr/w
Enumerated Values:
1vlan
2vsi
3mapping
4qinqtermination
5dot1qtermination
 .1.3.6.1.4.1.2011.5.25.116.2.7.1.8
hwQinQStaticMACCfgRowStatus
Used for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this objec…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.7.1.9

hwQinQSubIfDot1qTermTable

table
.1.3.6.1.4.1.2011.5.25.116.2.8 · 1 row entry · 5 columns
Open in standard view 
Used to configure Dot1q-termination function in sub interface ,then packets
transmitted from this sub interface input with one tag will be terminated.
hwQinQSubIfDot1qTermEntry entry .1.3.6.1.4.1.2011.5.25.116.2.8.1
The entry of an interface enabled the Dot1q-termination function.
Indexes
hwQinQSubIfDot1qTermIfIndex hwQinQSubIfDot1qTermVidStart
Column Syntax OID
hwQinQSubIfDot1qTermIfIndex
Index number of the Dot1q-termination interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.8.1.1
hwQinQSubIfDot1qTermVidStart
When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart
is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.8.1.2
hwQinQSubIfDot1qTermVidEnd
When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is
the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id.
Q-BRIDGE-MIBVlanIdr/w
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.8.1.3
hwQinQSubIfDot1qTermGroupId
Group-management id.
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.116.2.8.1.4
hwQinQSubIfDot1qTermRowStatus
Used for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this objec…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.8.1.5

hwQinQSubIfDot1qTermStatTable

table
.1.3.6.1.4.1.2011.5.25.116.2.9 · 1 row entry · 13 columns
Open in standard view 
When a sub interface configured Dot1q-termination, hwQinQSubIfDot1qTermStatTable used to
statistic total number of the out packets and in packets.
hwQinQSubIfDot1qTermStatEntry entry .1.3.6.1.4.1.2011.5.25.116.2.9.1
The entry of an interface configured Dot1q-termination function.
Indexes
hwQinQSubIfDot1qTermStatIfIndex hwQinQSubIfDot1qTermStatCEVlan
Column Syntax OID
hwQinQSubIfDot1qTermStatIfIndex
Index number of the Dot1q-termination interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.1
hwQinQSubIfDot1qTermStatCEVlan
Inner vlan in packets which input the Dot1q-termination sub interface,
used to indicate the packets as an index.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.2
hwQinQSubIfDot1qTermStatGroupId
The group-management id. The statistic number of packets can not get if
the statistic funtion is not enabled.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.3
hwQinQSubIfDot1qTermStatOutPackets
Total number of out packets of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.4
hwQinQSubIfDot1qTermStatOutBytes
Total number of out bytes of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.5
hwQinQSubIfDot1qTermStatInPackets
Total number of in packets of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.6
hwQinQSubIfDot1qTermStatInBytes
Total number of in bytes of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.7
hwQinQSubIfDot1qTermStatOutBdPackets
Total number of broadcast packets transmitted out of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.8
hwQinQSubIfDot1qTermStatInBdPackets
Total number of broadcast packets received from the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.9
hwQinQSubIfDot1qTermStatOutMuPackets
Total number of multicast packets transmitted out of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.10
hwQinQSubIfDot1qTermStatInMuPackets
Total number of multicast packets received from the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.11
hwQinQSubIfDot1qTermStatOutUniPackets
Total number of unicast packets transmitted out of the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.12
hwQinQSubIfDot1qTermStatInUniPackets
Total number of unicast packets received from the sub interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.116.2.9.1.13

hwQinQModeCfgTable

table
.1.3.6.1.4.1.2011.5.25.116.2.10 · 1 row entry · 4 columns
Open in standard view 
The table contains mode type and ethernet encapsulation type.
hwQinQModeCfgEntry entry .1.3.6.1.4.1.2011.5.25.116.2.10.1
The mode type and ethernet encapsulation type of an interface entry.
Indexes
hwQinQModeCfgIfIndex
Column Syntax OID
hwQinQModeCfgIfIndex
Index number of the interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.10.1.1
hwQinQModeCfgMode
Mode type of the interface.
Enumerationr/w
Enumerated Values:
1common
2qinq
 .1.3.6.1.4.1.2011.5.25.116.2.10.1.2
hwQinQEtherType
The value of tag type is encapsulated in the head of the ethernet frame
to distinguish the encapsulated mode between the 802.1Q and QinQ.
Unsigned32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.2011.5.25.116.2.10.1.3
hwQinQCeEtherType
The value of tag type is encapsulated in the head of the ethernet frame
to distinguish the encapsulated mode between the 802.1Q and QinQ.
Unsigned32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.2011.5.25.116.2.10.1.4

hwQinQCtrlVlanCfgTable

table
.1.3.6.1.4.1.2011.5.25.116.2.11 · 1 row entry · 6 columns
Open in standard view 
The control-vlan id and control-vlan's attributes can be configured in sub interface.
You must designate control-vlan as QinQ or Dot1q before configuring QinQ-termination 
function or Dot1q-termination function.
hwQinQCtrlVlanCfgEntry entry .1.3.6.1.4.1.2011.5.25.116.2.11.1
The Control-vlan configuration entry.
Indexes
hwQinQCtrlVlanCfgIfIndex
Column Syntax OID
hwQinQCtrlVlanCfgIfIndex
Index number of the sub interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.11.1.1
hwQinQCtrlVlan
Control-Vlan id.
Q-BRIDGE-MIBVlanIdr/w
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.11.1.2
hwQinQSubIfType
The type of sub interface.
Enumerationr/w
Enumerated Values:
1qinq
2dot1q
 .1.3.6.1.4.1.2011.5.25.116.2.11.1.3
hwQinQCtrlVlanFlag
The service type of the sub interface, by setting hwQinQCtrlVlanFlag to the value (rtprotocolenable),
the route-protocol attribute enabled; and by setting hwQinQCtrlVlanFlag to the value (localswitch),
the localswitch …
Enumerationr/w
Enumerated Values:
1rtprotocolenable
2original
3localswitch
 .1.3.6.1.4.1.2011.5.25.116.2.11.1.4
hwQinQCtrlVlanRowStatus
This table can be created and deleted.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.11.1.5
hwQinQFlexibleFlag
The service type of the sub interface, by setting hwQinQFlexibleFlag to the value (flexibleenable),
the flexible attribute enabled;
So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQFlexibleFlag…
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.11.1.6

hwQinQGroupCfgTable

table
.1.3.6.1.4.1.2011.5.25.116.2.12 · 1 row entry · 5 columns
Open in standard view 
The group-management id and group's attributes can be configured in sub interface.
hwQinQGroupCfgEntry entry .1.3.6.1.4.1.2011.5.25.116.2.12.1
Group configuration entry.
Indexes
hwQinQGroupCfgIfIndex hwQinQGroupId
Column Syntax OID
hwQinQGroupCfgIfIndex
Index number of the interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.12.1.1
hwQinQGroupId
Group-management id.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.5.25.116.2.12.1.2
hwQinQGroupType
The type of the group.
Enumerationr/w
Enumerated Values:
1single
2multi
 .1.3.6.1.4.1.2011.5.25.116.2.12.1.3
hwQinQGroupStat
Whether the statistic function is enabled.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.12.1.4
hwQinQGroupRowStatus
This table can be created and deleted.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.12.1.5

hwQinQAsymmetryCfgTable

table
.1.3.6.1.4.1.2011.5.25.116.2.13 · 1 row entry · 3 columns
Open in standard view 
The table to configure asymmetry attribution of the interface.
hwQinQAsymmetryCfgEntry entry .1.3.6.1.4.1.2011.5.25.116.2.13.1
The entry of the asymmetry configure table.
Indexes
hwQinQAsymmetryCfgIfIndex
Column Syntax OID
hwQinQAsymmetryCfgIfIndex
Index number of the QinQ-termination interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.13.1.1
hwQinQSubIfAsymmetry
The asymmetry attribution of the QinQ-termination interface.
Enumerationr/w
Enumerated Values:
1symmetry
2asymmetry
3transparent
 .1.3.6.1.4.1.2011.5.25.116.2.13.1.2
hwQinQAsymmetryUserMode
The user mode attribute of the QinQ-termination sub interface.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.13.1.3

hwQinQRemarkCfgTable

table
.1.3.6.1.4.1.2011.5.25.116.2.14 · 1 row entry · 2 columns
Open in standard view 
Interface remark config.
hwQinQRemarkCfgEntry entry .1.3.6.1.4.1.2011.5.25.116.2.14.1
The entry of the interface remark configuration table.
Indexes
hwQinQRemarkCfgIfIndex
Column Syntax OID
hwQinQRemarkCfgIfIndex
Index number of the sub interface,
which should configure QinQ-termination function first.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.14.1.1
hwQinQPriorityRemark
The service policy map to set the 802.1P bits. By default(pevid),
copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag,
by setting object to (cevid), copy the P bits that were in inner CE VALN
tag t…
Enumerationr/w
Enumerated Values:
0specify0
1specify1
2specify2
3specify3
4specify4
5specify5
6specify6
7specify7
8cevid
9pevid
 .1.3.6.1.4.1.2011.5.25.116.2.14.1.2

hwBpduTunnelIngressTable

table
.1.3.6.1.4.1.2011.5.25.116.2.15 · 1 row entry · 4 columns
Open in standard view 
The table of bpdu tunnel ingress.
hwBpduTunnelIngressEntry entry .1.3.6.1.4.1.2011.5.25.116.2.15.1
The entry of of bpdu tunnel ingress.
Indexes
hwBpduTunnelIngressPortIndex hwBpduTunnelBpduIngressMacIndex
Column Syntax OID
hwBpduTunnelIngressPortIndex
Port index in interface.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.116.2.15.1.1
hwBpduTunnelBpduIngressMacIndex
bpdu mac address list
BPDU Dmac protocol
01-80-C2-00-00-00 stp01
01-80-C2-00-00-01 pauseFrame
01-80-C2-00-00-02 reserved02
01-80-C2-00-00-03 reserved03
01-80-C2-00-00-04 reserved04
01-80-C2-00-00-0…
BpduIndex
Textual Convention: BpduIndex Enumeration
Type Values:
1stp01
2pauseFrame
3reserved02
4reserved03
5reserved04
6reserved05
7reserved06
8reserved07
9stp02
10reserved08
11hgmp
12reserved09
13reserved10
14reserved11
15reserved12
16reserved13
17reserved14
18reserved15
19reserved16
20reserved17
21isisLevel01
22isisLevel02
23reserved18
24reserved19
25reserved20
26reserved21
27reserved22
28reserved23
29reserved24
30reserved25
31reserved26
32reserved27
33gmrp
34gvrp
35reserved28
36reserved29
37reserved30
38reserved31
39reserved32
40reserved33
41reserved34
42reserved35
43reserved36
44reserved37
45reserved38
46reserved39
47reserved40
48reserved41
49lacp
50cdp
51pagp
52udld
53vtp
 .1.3.6.1.4.1.2011.5.25.116.2.15.1.2
hwBpduTunnelIngressAddress
Group mac address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.116.2.15.1.3
hwBpduTunnelIngressRowStatus
Bpdu tunnek ingress row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.15.1.4

hwBpduTunnelEgressTable

table
.1.3.6.1.4.1.2011.5.25.116.2.16 · 1 row entry · 4 columns
Open in standard view 
The table of bpdu tunnel egress.
hwBpduTunnelEgressEntry entry .1.3.6.1.4.1.2011.5.25.116.2.16.1
The entry of bpdu tunnel egress.
Indexes
hwBpduTunnelEgressPortIndex hwBpduTunnelBpduEgressMacIndex
Column Syntax OID
hwBpduTunnelEgressPortIndex
Port index in interface.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.116.2.16.1.1
hwBpduTunnelBpduEgressMacIndex
Bpdu MAC address list
BPDU DMAC protocol
01-80-C2-00-00-00 stp01
01-80-C2-00-00-01 pauseFrame
01-80-C2-00-00-02 reserved02
01-80-C2-00-00-03 reserved03
01-80-C2-00-00-04 reserved04
01-80-C2-00-0…
BpduIndex
Textual Convention: BpduIndex Enumeration
Type Values:
1stp01
2pauseFrame
3reserved02
4reserved03
5reserved04
6reserved05
7reserved06
8reserved07
9stp02
10reserved08
11hgmp
12reserved09
13reserved10
14reserved11
15reserved12
16reserved13
17reserved14
18reserved15
19reserved16
20reserved17
21isisLevel01
22isisLevel02
23reserved18
24reserved19
25reserved20
26reserved21
27reserved22
28reserved23
29reserved24
30reserved25
31reserved26
32reserved27
33gmrp
34gvrp
35reserved28
36reserved29
37reserved30
38reserved31
39reserved32
40reserved33
41reserved34
42reserved35
43reserved36
44reserved37
45reserved38
46reserved39
47reserved40
48reserved41
49lacp
50cdp
51pagp
52udld
53vtp
 .1.3.6.1.4.1.2011.5.25.116.2.16.1.2
hwBpduTunnelEgressAddress
Group mac address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.116.2.16.1.3
hwBpduTunnelEgressRowStatus
Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.16.1.4

hwBpduTunnelVlanTable

table
.1.3.6.1.4.1.2011.5.25.116.2.17 · 1 row entry · 4 columns
Open in standard view 
The table of port bpdu tunnel.
hwBpduTunnelVlanEntry entry .1.3.6.1.4.1.2011.5.25.116.2.17.1
The entry of port bpdu tunnel vlan.
Indexes
hwBpduTunnelPortIndex
Column Syntax OID
hwBpduTunnelPortIndex
Port index in interface.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.116.2.17.1.1
hwBpduTunnelEnable
Bpdu tunnel enable.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.17.1.2
hwBpduTunnelVlanListLow
Vlan bpdu tunnel in port.
HUAWEI-L2IF-MIBVlanListr/w
Textual Convention: HUAWEI-L2IF-MIBVlanList OctetString
 .1.3.6.1.4.1.2011.5.25.116.2.17.1.3
hwBpduTunnelVlanListHigh
Vlan bpdu tunnel in port.
HUAWEI-L2IF-MIBVlanListr/w
Textual Convention: HUAWEI-L2IF-MIBVlanList OctetString
 .1.3.6.1.4.1.2011.5.25.116.2.17.1.4

hwBpduTunnelTable

table
.1.3.6.1.4.1.2011.5.25.116.2.18 · 1 row entry · 4 columns
Open in standard view 
The table of bpdu tunnel.
hwBpduTunnelEntry entry .1.3.6.1.4.1.2011.5.25.116.2.18.1
The entry of of bpdu tunnel.
Indexes
hwBpduTunnelBpduIndex
Column Syntax OID
hwBpduTunnelBpduIndex
Bpdu mac address list
BPDU Dmac protocol
01-80-C2-00-00-00 stp01 (1)
01-80-C2-00-00-01 pauseFrame (2)
01-80-C2-00-00-02 reserved02 (3)
01-80-C2-00-00-03 reserved03 (4)
01-80-C2-00-00…
BpduIndex
Textual Convention: BpduIndex Enumeration
Type Values:
1stp01
2pauseFrame
3reserved02
4reserved03
5reserved04
6reserved05
7reserved06
8reserved07
9stp02
10reserved08
11hgmp
12reserved09
13reserved10
14reserved11
15reserved12
16reserved13
17reserved14
18reserved15
19reserved16
20reserved17
21isisLevel01
22isisLevel02
23reserved18
24reserved19
25reserved20
26reserved21
27reserved22
28reserved23
29reserved24
30reserved25
31reserved26
32reserved27
33gmrp
34gvrp
35reserved28
36reserved29
37reserved30
38reserved31
39reserved32
40reserved33
41reserved34
42reserved35
43reserved36
44reserved37
45reserved38
46reserved39
47reserved40
48reserved41
49lacp
50cdp
51pagp
52udld
53vtp
 .1.3.6.1.4.1.2011.5.25.116.2.18.1.1
hwBpduTunnelBpduEnable
Bpdu tunnel enable or disable.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.18.1.2
hwBpduTunnelMultiAddress
Group MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.116.2.18.1.3
hwBpduTunnelRowStatus
Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.18.1.4

hwQinQSwapCfgTable

table
.1.3.6.1.4.1.2011.5.25.116.2.19 · 1 row entry · 2 columns
Open in standard view 
This table describes the vlan swap configurations of interfaces.
hwQinQSwapCfgEntry entry .1.3.6.1.4.1.2011.5.25.116.2.19.1
An entry is created for each active ethernet type interface in the device
and deleted when the interface been not exist.
Indexes
hwQinQSwapCfgIfIndex
Column Syntax OID
hwQinQSwapCfgIfIndex
Index number of the interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.19.1.1
hwQinQSwapCfgFlag
QinQ swap flag of the interface, which indicates whether to swap the two vlan tags or not when the interface receives a packet with two 802.1q tags.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.19.1.2

hwQinQSubIfMapTable

table
.1.3.6.1.4.1.2011.5.25.116.2.20 · 1 row entry · 13 columns
Open in standard view 
The table is used to configure QinQ-mapping function in sub interface, then packets
transmitted from this sub interface input with one or two tags will be mapped to other tag or tags.
hwQinQSubIfMapEntry entry .1.3.6.1.4.1.2011.5.25.116.2.20.1
The entry of an interface enabled the QinQ-Map function.
Indexes
hwQinQSubIfMapIfIndex hwQinQSubIfPEVlan hwQinQSubIfCEVlanStart
Column Syntax OID
hwQinQSubIfMapIfIndex
Index number of the QinQ-Map interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.1
hwQinQSubIfPEVlan
Outer vlan id of the packets which have two tags before being Mapped.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.2
hwQinQSubIfCEVlanStart
Inner start vlan id of the packets which have two tags before being Mapped.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.3
hwQinQSubIfCEVlanEnd
Inner end vlan id of the packets which have two tags before being Mapped.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.4
hwQinQSubIfPEVlanMap
Outer vlan id of the packets which have two tags after being Mapped.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.5
hwQinQSubIfPEEtherType
EtherType of Pe Mapped.
Unsigned32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.6
hwQinQSubIfCEVlanMap
Inner vlan id of the packets which have two tags after being Mapped.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.7
hwQinQSubIfCEEtherType
EtherType of Ce Mapped.
Unsigned32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.8
hwQinQSubIfMapGroupId
Group-management id.
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.9
hwQinQSubIfMapPe8021p
The service policy map to set the 802.1P bits. By default(pevid),
copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag,
by setting object to (cevid), copy the P bits that were in inner CE VALN
tag t…
Enumerationr/w
Enumerated Values:
0specify0
1specify1
2specify2
3specify3
4specify4
5specify5
6specify6
7specify7
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.10
hwQinQSubIfMapCe8021p
The service policy map to set the 802.1P bits. By default(pevid),
copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag,
by setting object to (cevid), copy the P bits that were in inner CE VALN
tag t…
Enumerationr/w
Enumerated Values:
0specify0
1specify1
2specify2
3specify3
4specify4
5specify5
6specify6
7specify7
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.11
hwQinQSubIfMapCetoPeFlag
The service type of the sub interface, by setting MapCetoPeFlag to the value (CetoPeenable),
the 8021p CetoPeenable attribute enabled.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.12
hwQinQSubIfMapRowStatus
Used for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this objec…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.20.1.13

hwQinQStackingVlanCfgTable

table
.1.3.6.1.4.1.2011.5.25.116.2.21 · 1 row entry · 3 columns
Open in standard view 
QinQ Stacking Vlan configuration table.
hwQinQStackingVlanCfgEntry entry .1.3.6.1.4.1.2011.5.25.116.2.21.1
This object indicates the configuration table for QinQ Stacking Vlan.
Indexes
hwQinQStackingVlanCfgIfIndex
Column Syntax OID
hwQinQStackingVlanCfgIfIndex
This object indicates the Index number of the vlanif interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.116.2.21.1.1
hwQinQStackingVlanCfgVlanId
This object indicates the outer vlan id for QinQ Stacking Vlan.
Q-BRIDGE-MIBVlanIdr/w
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.116.2.21.1.2
hwQinQStackingVlanCfgRowStatus
This object indicates the RowStatus of hwQinQStackingVlanTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.116.2.21.1.50