hwPowerName
HUAWEI-POWER-MIB ·
.1.3.6.1.4.1.2011.6.2.1.1.1.3
Object
Power name. Invalid: null string.
Context
- MIB
- HUAWEI-POWER-MIB
- OID
.1.3.6.1.4.1.2011.6.2.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwPowerSysInfoEntry
- Table
- hwPowerSysInfoTable
- Siblings
- 13
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPowerIndex Index of the power supply monitored by the monitoring unit | column | Integer32 | .1.3.6.1.4.1.2011.6.2.1.1.1.1 |
| hwPowerSupplyState Power supply modes.
Options:
1.ac(1) - indicates the AC power supply
2.battery(2) - indicates power supply by the batteries | column | Enumeration | .1.3.6.1.4.1.2011.6.2.1.1.1.10 |
| hwPowerWiringCheckSwitch Power wiring check switch of SMU.
Options:
1. disable(1) - indicates that the power wiring check state of SMU is disabled
2. enable(2) - indicates that the power wiring che… | column | Enumeration | .1.3.6.1.4.1.2011.6.2.1.1.1.11 |
| hwPowerLatitude The power latitude value.
Invalid: -. | column | OctetString | .1.3.6.1.4.1.2011.6.2.1.1.1.12 |
| hwPowerLongitude The power longitude value.
Invalid: -. | column | OctetString | .1.3.6.1.4.1.2011.6.2.1.1.1.13 |
| hwPowerBluetoothSwitch Power bluetooth state of SMU.
Options:
1. enable(0) - indicates that the power bluetooth state of SMU is enabled.
2. disable(1) - indicates that the power bluetooth state of … | column | Enumeration | .1.3.6.1.4.1.2011.6.2.1.1.1.14 |
| hwPowerType Type of the Power emu device.
Options:
1.power4875(1) - Type of the Power emu device is power4875
2.power4810(2) - Type of the Power emu device is po… | column | Enumeration | .1.3.6.1.4.1.2011.6.2.1.1.1.2 |
| hwPowerState Power board status:
Refers to the status of communication between the internal monitor board
of the power device and the external upper board.
Options:
1.normal(1) - indicat… | column | Enumeration | .1.3.6.1.4.1.2011.6.2.1.1.1.4 |
| hwPowerRowStatus RowStatus standard operation. The values 1 and 2 are supported currently.
1 indicates the activation status, and 2 indicates the non-activation status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.2.1.1.1.5 |
| hwPowerControlMode Control mode of the power monitor module.
Options:
1.manualControl(1) - control by manual, the remote mode
2.autoControl(2) - auto control mode, the default is auto control mod… | column | Enumeration | .1.3.6.1.4.1.2011.6.2.1.1.1.6 |
| hwPowerRemoteFrameID Apply for remote power system.
It is the frame ID that the remote unit exists in | column | Integer32 | .1.3.6.1.4.1.2011.6.2.1.1.1.7 |
| hwPowerProtect Apply for remote power system.
It is used to enable or disable N+1 protection function.
Options:
1.protect(1) - enables the N+1 protection function
2.undoProtect(2) - disa… | column | Enumeration | .1.3.6.1.4.1.2011.6.2.1.1.1.8 |
| hwPowerVersion Version of power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.6.2.1.1.1.9 |