hwMstpProNewPortPriority
HUAWEI-MSTP-MIB ·
.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.2
Object
column
r/w
Integer32
The value of this object identifies the priority of the port where the MSTI is configured.
Context
- MIB
- HUAWEI-MSTP-MIB
- OID
.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwMstpProNewPortEntry
- Table
- hwMstpProNewPortTable
- Siblings
- 32
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-240
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMstpProNewPortState The value of this object identifies the spanning tree status on the port where the MSTI is configured. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.1 |
| hwMstpProNewPortStpMcheck When root interface is changed from STP mode to RSTP or MSTP mode, the
appointed interface can not switch to RSTP or MSTP mode automatically.
At the time, you need switch back w… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.10 |
| hwMstpProNewPortStpTransLimit The value is used to set BPDU maximum transmission rate of the port.
If value is set 0, the transmit limit of the port is equal to the wMstpTransmitLimitDefault value | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.11 |
| hwMstpProNewPortStpRXStpBPDU The number of received Config BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.12 |
| hwMstpProNewPortStpTXStpBPDU The number of transmitted Config BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.13 |
| hwMstpProNewPortStpRXTCNBPDU The number of received TCN BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.14 |
| hwMstpProNewPortStpTXTCNBPDU The number of transmitted TCN BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.15 |
| hwMstpProNewPortStpRXRSTPBPDU The number of received RST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.16 |
| hwMstpProNewPortStpTXRSTPBPDU The number of transmitted RST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.17 |
| hwMstpProNewPortStpRXMSTPBPDU The number of received MST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.18 |
| hwMstpProNewPortStpTXMSTPBPDU The number of transmitted MST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.19 |
| hwMstpProNewPortStpClearStatistics Clear the Spanning Tree statistics in specified MSTP process.
The value is unused(65535) when it is read.
The value must be clear(1) when it is set. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.20 |
| hwMstpProNewPortStpDefaultPortCost The value of this object identifies the default path cost of the port where the MSTI is configured:
The value can be:
1: reset When you perform SET operation to this object, the… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.21 |
| hwMstpProNewPortStpStatus Whether the Spanning Tree Protocol is enabled on this port. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.22 |
| hwMstpProNewPortRootGuard The value of this object identifies whether the root guard function is enabled on the port where the MSTI is configured.
The value can be: 1: enabled
2: disabled
By default, the r… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.23 |
| hwMstpProNewPortLoopGuard The value of this object identifies whether the loop guard function is enabled on the port where the MSTI is configured.
The value can be: 1: enabled
2: disabled
By default, the l… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.24 |
| hwMstpProNewPortCompliance The value of this object identifies the protocol format of the MSTP packet sent and received on the port.
The protocol format can be one of the following:
1: auto (the self-adapt… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.25 |
| hwMstpProNewPortConfigDigestSnooping This object indicates whether the digest snooping function is enabled on the port:
1: enabled
2: disabled
By default, the function is not enabled. In other words, the default valu… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.26 |
| hwMstpProNewPortNoAgreementCheck The value of this object identifies whether the fast convergence detection is enabled on the interface belonging to the MSTP process.
In the scenarios where Huawei devices are in… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.27 |
| hwMstpProNewPortVplsSubinterfaceEnable The main interface notifies its sub-interfaces to update
MAC entries and ARP entries after receiving a TC message.
This prevents services from being interrupted. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.28 |
| hwMstpProNewPortBpduEncapsulation The value of this object identifies the protocol format of the BPDU sent on the port.
The protocol format can be one of the following:
1: vbst (the VBST format)
2: stp (the STP f… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.29 |
| hwMstpProNewPortPathCost The value of this object identifies the path cost of the port where the MSTI is configured. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.3 |
| hwMstpProNewPortBpduFilter This object indicates whether the port is enabled to send or receive BPDUs.
disable(1): indicates that the function of sending or receiving BPDUs is in the disabled state on the p… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.30 |
| hwMstpProNewPortStpRXTC The number of TC BPDUs received by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.31 |
| hwMstpProNewPortStpTXTC The number of TC BPDUs sent by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.32 |
| hwMstpProNewPortRole Indicates the port role on a particular instance. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.33 |
| hwMstpProNewPortDesignatedRoot The Bridge Identifier of the Root Bridge for the port of the
MSTP process Spanning Tree. | column | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.4 |
| hwMstpProNewPortDesignatedCost The value of this object identifies the specified cost of the port where the MSTI is configured. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.5 |
| hwMstpProNewPortDesignatedBridge The Bridge Identifier of the bridge which this port considers to
be the Designated Bridge for this port's segment. | column | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.6 |
| hwMstpProNewPortDesignatedPort The port identifier of the port on the Designated Bridge
for this port's segment. | column | OctetString | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.7 |
| hwMstpProNewPortStpEdgeport Whether the port fast is enabled in the MSTP process. By default, there is no configuration on the port. When the
port is the edge port, it can change to forwarding state immedia… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.8 |
| hwMstpProNewPortStpPointToPoint The value of this object identifies whether the port where the MSTI is configured is a P2P port.
The value can be:
1: forceTrue
2: forceFalse
3: auto
The default value is auto. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.9 |