hwMstpProNewPortConfigDigestSnooping

HUAWEI-MSTP-MIB · .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.26
MIB view Table view

Object

column r/w P-BRIDGE-MIBEnabledStatus 
This object indicates whether the digest snooping function is enabled on the port:
1: enabled
2: disabled
By default, the function is not enabled. In other words, the default value is disabled(2).

Context

MIB
HUAWEI-MSTP-MIB
OID
.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.26
Type
column
Access
readwrite
Status
current
Parent
hwMstpProNewPortEntry
Table
hwMstpProNewPortTable
Siblings
32

Syntax

P-BRIDGE-MIBEnabledStatus
Source
P-BRIDGE-MIBEnabledStatus
Base type
Enumeration

Values & Constraints

Type Values
1enabled
2disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwMstpProNewPortState
The value of this object identifies the spanning tree status on the port where the MSTI is configured.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.1
hwMstpProNewPortStpMcheck
When root interface is changed from STP mode to RSTP or MSTP mode, the appointed interface can not switch to RSTP or MSTP mode automatically. At the time, you need switch back w…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.10
hwMstpProNewPortStpTransLimit
The value is used to set BPDU maximum transmission rate of the port. If value is set 0, the transmit limit of the port is equal to the wMstpTransmitLimitDefault value
columnInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.11
hwMstpProNewPortStpRXStpBPDU
The number of received Config BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.12
hwMstpProNewPortStpTXStpBPDU
The number of transmitted Config BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.13
hwMstpProNewPortStpRXTCNBPDU
The number of received TCN BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.14
hwMstpProNewPortStpTXTCNBPDU
The number of transmitted TCN BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.15
hwMstpProNewPortStpRXRSTPBPDU
The number of received RST BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.16
hwMstpProNewPortStpTXRSTPBPDU
The number of transmitted RST BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.17
hwMstpProNewPortStpRXMSTPBPDU
The number of received MST BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.18
hwMstpProNewPortStpTXMSTPBPDU
The number of transmitted MST BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.19
hwMstpProNewPortPriority
The value of this object identifies the priority of the port where the MSTI is configured.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.2
hwMstpProNewPortStpClearStatistics
Clear the Spanning Tree statistics in specified MSTP process. The value is unused(65535) when it is read. The value must be clear(1) when it is set.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.20
hwMstpProNewPortStpDefaultPortCost
The value of this object identifies the default path cost of the port where the MSTI is configured: The value can be: 1: reset When you perform SET operation to this object, the…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.21
hwMstpProNewPortStpStatus
Whether the Spanning Tree Protocol is enabled on this port.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.22
hwMstpProNewPortRootGuard
The value of this object identifies whether the root guard function is enabled on the port where the MSTI is configured. The value can be: 1: enabled 2: disabled By default, the r…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.23
hwMstpProNewPortLoopGuard
The value of this object identifies whether the loop guard function is enabled on the port where the MSTI is configured. The value can be: 1: enabled 2: disabled By default, the l…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.24
hwMstpProNewPortCompliance
The value of this object identifies the protocol format of the MSTP packet sent and received on the port. The protocol format can be one of the following: 1: auto (the self-adapt…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.25
hwMstpProNewPortNoAgreementCheck
The value of this object identifies whether the fast convergence detection is enabled on the interface belonging to the MSTP process. In the scenarios where Huawei devices are in…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.27
hwMstpProNewPortVplsSubinterfaceEnable
The main interface notifies its sub-interfaces to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.28
hwMstpProNewPortBpduEncapsulation
The value of this object identifies the protocol format of the BPDU sent on the port. The protocol format can be one of the following: 1: vbst (the VBST format) 2: stp (the STP f…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.29
hwMstpProNewPortPathCost
The value of this object identifies the path cost of the port where the MSTI is configured.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.3
hwMstpProNewPortBpduFilter
This object indicates whether the port is enabled to send or receive BPDUs. disable(1): indicates that the function of sending or receiving BPDUs is in the disabled state on the p…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.30
hwMstpProNewPortStpRXTC
The number of TC BPDUs received by the port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.31
hwMstpProNewPortStpTXTC
The number of TC BPDUs sent by the port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.32
hwMstpProNewPortRole
Indicates the port role on a particular instance.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.33
hwMstpProNewPortDesignatedRoot
The Bridge Identifier of the Root Bridge for the port of the MSTP process Spanning Tree.
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.4
hwMstpProNewPortDesignatedCost
The value of this object identifies the specified cost of the port where the MSTI is configured.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.5
hwMstpProNewPortDesignatedBridge
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.6
hwMstpProNewPortDesignatedPort
The port identifier of the port on the Designated Bridge for this port's segment.
columnOctetString.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.7
hwMstpProNewPortStpEdgeport
Whether the port fast is enabled in the MSTP process. By default, there is no configuration on the port. When the port is the edge port, it can change to forwarding state immedia…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.8
hwMstpProNewPortStpPointToPoint
The value of this object identifies whether the port where the MSTI is configured is a P2P port. The value can be: 1: forceTrue 2: forceFalse 3: auto The default value is auto.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.29.1.9