hwMstpAdminRevisionLevel
HUAWEI-MSTP-MIB ·
.1.3.6.1.4.1.2011.5.25.42.4.1.10
Object
scalar
r/w
Integer32
The value of this object identifies the administrative revision level of the MST region. It changes to hwMstpOperRevisionLevel when users use the activing command to active the configuration of the region. The revision level and region name of MSTP, and the VLAN mapping table determine the MST region that the switch belongs to. The value ranges from 0 to 65535. The default value is 0.
Context
- MIB
- HUAWEI-MSTP-MIB
- OID
.1.3.6.1.4.1.2011.5.25.42.4.1.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwMstpObjects
- Siblings
- 36
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMstpStatus Whether the Bridge MSTP is enabled.
Enable indicate that MSTP enable in the bridge;
Disabled indicate that MSTP disable in the bridge.
By default, the Bridge MSTP is disabled. | scalar | HwMSTPEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.1 |
| hwMstpOperFormatSelector The operative Configuration Identifier Format Selector in use by the
Bridge. This has a value of 0 indicate the format specified in the
Standard of IEEE 802.1s. By default, the … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.4.1.11 |
| hwMstpOperRegionName This MSTP operative region name.
It can be used to determine whether
the region is the same region with
the mapping between VLAN and instance
and hwMstpOperRevisionLevel. | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.42.4.1.12 |
| hwMstpOperRevisionLevel The value of this object identifies the effective revision level of the MST region.
Two routers belong to the same MST region only if they have the same MST region name,
Mapping … | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.13 |
| hwMstpRegionConfActive Active the region configuration.
Generally, the value of the hwMstpRegionConfActive is disable,
but the value will be set as enable if Net Manager want to
active the configure of… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.14 |
| hwMstpDefaultVlanAllo This object identifies the default mapping relationship between the VLANs and the MSTIs in the MST region.
1: enable When you set this object, the value can be enable only.
65535:… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.15 |
| hwMstpDefaultRegionName The object indicates the MSTP path cost.
1: indicates dot1d-1998, which is the IEEE 802.1d standard proposed in 1998.2.
2: indicates dot1t, which is the IEEE 802.1t standard.
3: i… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.16 |
| hwMstpPathCostStandard The value of this object identifies the path cost standard.
1: 1: dot1d-1988 is the IEEE 802.1d standard method in 1998.
2: dot1t is the standard method of the IEEE 802.1t.
3: leg… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.17 |
| hwMstpVIDAllocationTable The table includes the information of the VLAN with relation to the instance of MSTP. | table | - | .1.3.6.1.4.1.2011.5.25.42.4.1.18 |
| hwMstpInstanceTable This table describes the attribute value, description, and operation restriction of configurable attributes of the MSTI. | table | - | .1.3.6.1.4.1.2011.5.25.42.4.1.19 |
| hwMstpForceVersion The value of this object identifies the protocol mode of the STP.
0: STP
2: RSTP
3: MSTP
Default value: MSTP (3). | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.2 |
| hwMstpPortTable This table describes the attribute value, description, and operation restriction conditions of the port in each MSTI. | table | - | .1.3.6.1.4.1.2011.5.25.42.4.1.20 |
| hwMstpSnooping when the device's interface receive TCN, the servers is normal in device where MSTP is disable.
By default, the value is disabled. | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.21 |
| hwMstpAccessoryTable The table of MSTP Accessory Information. | table | - | .1.3.6.1.4.1.2011.5.25.42.4.1.22 |
| hwMstpProTable This table describes the attribute value, attribute description, and access restrictions of each MSTP process. | table | - | .1.3.6.1.4.1.2011.5.25.42.4.1.23 |
| hwMstpPortBindTable The port bind table. | table | - | .1.3.6.1.4.1.2011.5.25.42.4.1.24 |
| hwMstpProPortTable The table includes the information of the port
of the MSTP process. | table | - | .1.3.6.1.4.1.2011.5.25.42.4.1.25 |
| hwMstpTcGuard Whether the Bridge TC Guard function is enabled.
If the function is enabled, the TC message in each instance exceeded
threshold will be deferred to deal with at the end of TC pr… | scalar | HwMSTPEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.26 |
| hwMstpTcGuardThreshold The value of this object identifies the maximum number of TC BPDUs that can be processed by an MSTI within the TC guard time. The default value is 3. | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.27 |
| hwMstpProInstanceTable This table describes the attribute value, attribute description, and access restrictions of each MSTI in an MSTP process. | table | - | .1.3.6.1.4.1.2011.5.25.42.4.1.28 |
| hwMstpProNewPortTable This table describes the attribute value, attribute description, and access restrictions of ports in each MSTI in an MSTP process. | table | - | .1.3.6.1.4.1.2011.5.25.42.4.1.29 |
| hwMstpDiameter The value of this object identifies the network diameter of the STP.
It affects the time that include hello time, forward delay time and maxage.
Every bridge can set the diameter… | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.3 |
| hwMstpEdgedPortDefault This object is used to configure a port as the default edge port. | scalar | HwMSTPEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.30 |
| hwMstpBpduFilterPortDefault This object is used to configure a port as the bpdu-filter port. | scalar | HwMSTPEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.31 |
| hwMstpTransmitLimitDefault The value is used to set BPDU maximum transmission rate of all port in the device. | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.32 |
| hwMstpPwName Pw name | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.42.4.1.33 |
| hwMstpPortTcSnoopingTable This table describes whether ports are enabled to transparently transmit STP packets over the TRILL network. | table | - | .1.3.6.1.4.1.2011.5.25.42.4.1.34 |
| hwMstpPortCountUpperThreshold The value of this object identifies the upper threshold for the number of Up STP-capable interfaces. | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.35 |
| hwMstpPortCountLowerThreshold The value of this object identifies the lower threshold for the number of Up STP-capable interfaces. | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.36 |
| hwMstpSrcMacAddress source macaddress | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.42.4.1.37 |
| hwMstpBridgeMaxHops The value of this object identifies the maximum hops of a spanning tree in an MST region.
The maximum hops of a spanning tree in an MST region can limit the network scale of the … | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.4 |
| hwMstpMasterBridgeID The Bridge Identifier of the current Master Bridge.
It is the root Bridge Identifier of the instance 0 in the region. | scalar | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.2011.5.25.42.4.1.5 |
| hwMstpMasterPathCost The CIST path cost from the transmitting Bridge to the Master Bridge.
By default, the value is 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.4.1.6 |
| hwMstpBpduGuard The value of this object identifies whether the BPDU protection is enabled on the bridge.
1: enable
2: disable
Default value: disabled. | scalar | HwMSTPEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.7 |
| hwMstpAdminFormatSelector The administrative Configuration Identifier Format Selector in use
by the Bridge. This has a value of 0 indicate the format specified
in the Standard of IEEE 802.1s. By default,… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.4.1.8 |
| hwMstpAdminRegionName This object indicates the MST administrative region name.
It changes to hwMstpOperRegionName when user uses the activing command to active the configuration of the region.
By de… | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.42.4.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| DLINK-3100-SSLrlSslCertificateExportId Identifies the index of this certficate / certificate request the table holds. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.100.2.1.1 |
| DLINK-3100-SSLrlSslCertificateExportType Identifies the type of data the current entry shows. | column | Enumeration | .1.3.6.1.4.1.171.10.94.89.89.100.2.1.2 |
| DLINK-3100-SSLrlSslCertificateExportFragmentId Identifies the index of this fragment in the certificate request. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.100.2.1.3 |