hwMplsBfdDetectMultiplier

HUAWEI-MPLSLSR-EXT-MIB · .1.3.6.1.4.1.2011.5.25.182.1.8
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
This object indicates the value of the detect multiplier. 
If the value of the detect multiplier is set as 0, 
it indicates that the value returns to the default value.

Context

MIB
HUAWEI-MPLSLSR-EXT-MIB
OID
.1.3.6.1.4.1.2011.5.25.182.1.8
Type
scalar
Access
readwrite
Status
current
Parent
hwMplsLsrExtObject
Siblings
25

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwMplsLsrId
This object indicates the configuration of the MPLS LSR ID. Before the MPLS capability is enabled, the MPLS LSR ID must be configured. After the MPLS capability is enabled, the …
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.182.1.1
hwMplsBfdTrigger
This object indicates the MPLS BFD triggering policy. By using this object, you can also specify the next hop and the outgoing interface. To configure the MPLS BFD triggering po…
scalarEnumeration.1.3.6.1.4.1.2011.5.25.182.1.10
hwMplsBfdTriggerNextHop
This object indicates the next hop when the MPLS BFD trigger policy is configured as host. The next hop and the outgoing interface can be specified at the same time.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.182.1.11
hwMplsBfdTriggerInterface
This object indicates the outgoing interface when the MPLS BFD trigger policy is configured as host. The next hop and the outgoing interface can be specified at the same time. I…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.182.1.12
hwMplsBfdTriggerFecListName
This object indicates the FEC list when the MPLS BFD trigger policy is configured. The valid length of the FEC list ranges from 1 to 31 characters. If the specified FEC list doe…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.182.1.13
hwLdpVirtualTunnelFEC
This object indicates the LDP virtual tunnel FEC.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.182.1.14
hwMplsBgpBfdCapabilityConfig
This object indicates the configuration or deletion of the MPLS BGP BFD capability. Before the MPLS BGP BFD function is enabled, you must enable the MPLS capability and BFD capab…
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.182.1.15
hwMplsBgpBfdMinTx
This object indicates the minimum forwarding period. If the minimum forwarding period is set as 0 seconds, it indicates that the minimum forwarding period returns to the default…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.182.1.16
hwMplsBgpBfdMinRx
This object indicates the minimum receiving period. If the minimum receiving period is set as 0 seconds, it indicates that the minimum receiving period returns to the default va…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.182.1.17
hwMplsBgpBfdDetectMultiplier
This object indicates the value of the detect multiplier. If the value of the detect multiplier is set as 0, it indicates that the value returns to the default value.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.182.1.18
hwMplsBgpBfdTriggerTunnel
This object indicates the MPLS BGP BFD triggering policy. To configure the MPLS BGP BFD triggering policy, you must enable MPLS and BFD in advance. Options: 1. triggerHost(1) …
scalarEnumeration.1.3.6.1.4.1.2011.5.25.182.1.19
hwMplsCapabilityConfig
This object indicates the configuration or deletion of the MPLS capability. Before the MPLS capability is enabled, the MPLS LSR ID must be configured.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.182.1.2
hwMplsBgpBfdTriggerTunnelIpprefix
This object indicates the IP Prefix name when the MPLS BGP BFD trigger policy is configured. The valid length of the IP prefix name ranges from 1 to 169 characters. Range: 1-169
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.182.1.20
hwMplsLabelAdvertise
This object indicates the way to configure label advertisement policy. By default, the label advertisement policy is implicitnull. Before the label advertisement policy is confi…
scalarEnumeration.1.3.6.1.4.1.2011.5.25.182.1.3
hwMplsStatisticsIntervalTimer
This object indicates the value of the MPLS statistics timer. Range: 30-65535 Default: 0 Unit: seconds
scalarInteger32.1.3.6.1.4.1.2011.5.25.182.1.4
hwMplsBfdCapabilityConfig
This object indicates the configuration or deletion of the MPLS BFD capability. Before the MPLS BFD function is enabled, you must enable the MPLS capability and BFD capability.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.182.1.5
hwMplsFecListTable
This table is used to configure or delete MPLS FEC Node.
table-.1.3.6.1.4.1.2011.5.25.182.1.50
hwMplsInterfaceTable
This table is used to configure or delete the MPLS capability on the interface.
table-.1.3.6.1.4.1.2011.5.25.182.1.51
hwLdpStaticFrrInterfaceTable
This table is used to configure or delete static LDP FRR entries on the interface.
table-.1.3.6.1.4.1.2011.5.25.182.1.52
hwLdpVirtualTunnelTable
This table specifies LDP virtual tunnel information.
table-.1.3.6.1.4.1.2011.5.25.182.1.53
hwLdpVirtualTunnelTrapnode-.1.3.6.1.4.1.2011.5.25.182.1.54
hwMplsStaticLspTable
This table is used to create or delete static LSP configurations.
table-.1.3.6.1.4.1.2011.5.25.182.1.55
hwMplsBfdMinTx
This object indicates the minimum forwarding period. If the minimum forwarding period is set as 0 seconds, it indicates that the minimum forwarding period returns to the default…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.182.1.6
hwMplsBfdMinRx
This object indicates the minimum receiving period. If the minimum receiving period is set as 0 seconds, it indicates that the minimum receiving period returns to the default va…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.182.1.7
hwMplsFecListName
This object indicates the name of the FEC LIST. The name of the FEC LIST is globally unique, with a valid length from 1 to 31 characters. If the character length is 0, it indica…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.182.1.9