hwLdpVirtualTunnelFEC
HUAWEI-MPLSLSR-EXT-MIB ·
.1.3.6.1.4.1.2011.5.25.182.1.14
Object
scalar
SNMPv2-SMIUnsigned32
This object indicates the LDP virtual tunnel FEC.
Context
- MIB
- HUAWEI-MPLSLSR-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.182.1.14- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- hwMplsLsrExtObject
- Siblings
- 25
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsLsrId This object indicates the configuration of the MPLS LSR ID.
Before the MPLS capability is enabled, the MPLS LSR ID must be configured.
After the MPLS capability is enabled, the … | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.182.1.1 |
| hwMplsBfdTrigger This object indicates the MPLS BFD triggering policy.
By using this object, you can also specify the next hop and the outgoing interface.
To configure the MPLS BFD triggering po… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.182.1.10 |
| hwMplsBfdTriggerNextHop This object indicates the next hop when the MPLS BFD trigger policy is configured as host.
The next hop and the outgoing interface can be specified at the same time. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.182.1.11 |
| hwMplsBfdTriggerInterface This object indicates the outgoing interface when the MPLS BFD trigger policy is configured as host.
The next hop and the outgoing interface can be specified at the same time.
I… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.182.1.12 |
| hwMplsBfdTriggerFecListName This object indicates the FEC list when the MPLS BFD trigger policy is configured.
The valid length of the FEC list ranges from 1 to 31 characters.
If the specified FEC list doe… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.182.1.13 |
| hwMplsBgpBfdCapabilityConfig This object indicates the configuration or deletion of the MPLS BGP BFD capability.
Before the MPLS BGP BFD function is enabled, you must enable the MPLS capability and BFD capab… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.182.1.15 |
| hwMplsBgpBfdMinTx This object indicates the minimum forwarding period.
If the minimum forwarding period is set as 0 seconds,
it indicates that the minimum forwarding period returns to the default… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.182.1.16 |
| hwMplsBgpBfdMinRx This object indicates the minimum receiving period.
If the minimum receiving period is set as 0 seconds,
it indicates that the minimum receiving period returns to the default va… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.182.1.17 |
| hwMplsBgpBfdDetectMultiplier This object indicates the value of the detect multiplier.
If the value of the detect multiplier is set as 0,
it indicates that the value returns to the default value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.182.1.18 |
| hwMplsBgpBfdTriggerTunnel This object indicates the MPLS BGP BFD triggering policy.
To configure the MPLS BGP BFD triggering policy, you must enable MPLS and BFD in advance.
Options:
1. triggerHost(1) … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.182.1.19 |
| hwMplsCapabilityConfig This object indicates the configuration or deletion of the MPLS capability.
Before the MPLS capability is enabled, the MPLS LSR ID must be configured. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.182.1.2 |
| hwMplsBgpBfdTriggerTunnelIpprefix This object indicates the IP Prefix name when the MPLS BGP BFD trigger policy is configured.
The valid length of the IP prefix name ranges from 1 to 169 characters.
Range: 1-169 | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.182.1.20 |
| hwMplsLabelAdvertise This object indicates the way to configure label advertisement policy.
By default, the label advertisement policy is implicitnull.
Before the label advertisement policy is confi… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.182.1.3 |
| hwMplsStatisticsIntervalTimer This object indicates the value of the MPLS statistics timer.
Range: 30-65535
Default: 0
Unit: seconds | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.182.1.4 |
| hwMplsBfdCapabilityConfig This object indicates the configuration or deletion of the MPLS BFD capability.
Before the MPLS BFD function is enabled, you must enable the MPLS capability and BFD capability. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.182.1.5 |
| hwMplsFecListTable This table is used to configure or delete MPLS FEC Node. | table | - | .1.3.6.1.4.1.2011.5.25.182.1.50 |
| hwMplsInterfaceTable This table is used to configure or delete the MPLS capability on the interface. | table | - | .1.3.6.1.4.1.2011.5.25.182.1.51 |
| hwLdpStaticFrrInterfaceTable This table is used to configure or delete static LDP FRR entries on the interface. | table | - | .1.3.6.1.4.1.2011.5.25.182.1.52 |
| hwLdpVirtualTunnelTable This table specifies LDP virtual tunnel information. | table | - | .1.3.6.1.4.1.2011.5.25.182.1.53 |
| hwLdpVirtualTunnelTrap | node | - | .1.3.6.1.4.1.2011.5.25.182.1.54 |
| hwMplsStaticLspTable This table is used to create or delete static LSP configurations. | table | - | .1.3.6.1.4.1.2011.5.25.182.1.55 |
| hwMplsBfdMinTx This object indicates the minimum forwarding period.
If the minimum forwarding period is set as 0 seconds,
it indicates that the minimum forwarding period returns to the default… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.182.1.6 |
| hwMplsBfdMinRx This object indicates the minimum receiving period.
If the minimum receiving period is set as 0 seconds,
it indicates that the minimum receiving period returns to the default va… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.182.1.7 |
| hwMplsBfdDetectMultiplier This object indicates the value of the detect multiplier.
If the value of the detect multiplier is set as 0,
it indicates that the value returns to the default value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.182.1.8 |
| hwMplsFecListName This object indicates the name of the FEC LIST.
The name of the FEC LIST is globally unique, with a valid length from 1 to 31 characters.
If the character length is 0, it indica… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.182.1.9 |