hwPortMacLimitPortName
HUAWEI-L2MAM-MIB ·
.1.3.6.1.4.1.2011.5.25.42.2.1.63
Object
scalar
OctetString
The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
Context
- MIB
- HUAWEI-L2MAM-MIB
- OID
.1.3.6.1.4.1.2011.5.25.42.2.1.63- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- hwL2MAMObjects
- Siblings
- 62
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwL2MaxMacLimit The maximum of Mac-address limit rule. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.2.1.1 |
| hwMacRestrict This object indicates whether MAC address learning
restrict has been enabled for the system. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.2.1.10 |
| hwPortSecurityTable A table containing the port security information for device.
It can protect the port from inaccessible mac. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.11 |
| hwMacLimitGlobalRuleTable This table is used to query restriction rules on global MAC address learning. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.12 |
| hwMacLimitApplyRuleTable A table containing the global mac-address learning-limit rules and apply ports. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.13 |
| hwMacGlobalStatistics The number of the global mac-address items. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.2.1.14 |
| hwMacIfStatisticsTable A table showing the number of mac-address items by interface index. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.15 |
| hwMacSlotStatisticsTable This table is used to describe MAC capacity statistics on an interface board. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.16 |
| hwMacVlanStatisticsTable A table showing the number of mac-address items by VLAN ID. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.17 |
| hwMacVsiStatisticsTable A table showing the number of mac-address items by VSI name. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.18 |
| hwPwMacLimitTable This table is used to query MAC address learning suppression based on a PW. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.19 |
| hwdbCfgFdbTable This table is used to configure a VLAN-based, VSI-based, or global blackhole-based MAC address table or static MAC address table. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.2 |
| hwMacSpoofingDefendTable A table enable the MAC spoofing defend. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.20 |
| hwDiscardIllegalMacEnable When this object is set to 'enabled(1)' illegal MAC will be discarded. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.2.1.21 |
| hwDiscardIllegalMacAlarm When this object is set to 'enabled(1)' discard illegal MAC alarm
is enabled else disabled. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.2.1.22 |
| hwMacSpoofingDefend When this object is set to 'enabled(1)' MAC spoofing defend
is enabled on global else disabled. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.2.1.23 |
| hwL2MacFlappingTrapObjects | node | - | .1.3.6.1.4.1.2011.5.25.42.2.1.24 |
| hwSlotMacLimitTable This is a rule table for SLOT-based MAC learning limit. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.25 |
| hwL2ProtocolTunnelTrapObjects | node | - | .1.3.6.1.4.1.2011.5.25.42.2.1.26 |
| hwL2ProtclTnlStdTable Group-MAC configuration table of standard L2 protocol tunnel. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.27 |
| hwL2ProtclTnlCusTable Group-MAC configuration table of customize L2 protocol tunnel. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.28 |
| hwL2ProtclTnlEnableTable Port configuration table of L2 protocol tunnel. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.29 |
| hwdbDynFdbTable This table is used to manage a device's dynamic MAC address table. Data in this table is generated after the device automatically learns MAC addresses and ages. Data in this table… | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.3 |
| hwL2ProtclTnlStatisticsTable Statistics table of L2 protocol tunnel. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.30 |
| hwBridgeMacAgingTime The interval that the hardware deletes any entry
whose hit bit is cleared and clears the hit bit
of the remaining entries.The default value is 300 seconds.'0'means the MAC entr… | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.42.2.1.31 |
| hwCfgMacAddrQueryTable The query table of layer 2 Configured mac-address forwarding table. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.32 |
| hwDynMacAddrQueryTable The query table of layer 2 dynamic mac-address forwarding table. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.33 |
| hwMacInfoQueryTable The MAC address information of layer 2 mac-address database. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.34 |
| hwVplsOverGreTable A table containing the VPLS over GRE information for device. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.35 |
| hwVllByPassOverGreTable A table containing the ByPass PW for VLL over GRE information for device. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.36 |
| hwUnucFlowAlarmTable A table containing the unknown unicast alarm information for interface. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.37 |
| hwMacHopAlarmTable A table containing the mac hop alarm information. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.38 |
| hwPwMacSpoofingAttackMacAddr A unicast MAC address for PW mac spoofing. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.42.2.1.39 |
| hwMacLimitTable A table containing the mac-address learning-limit rule information for device.
It can limit on ethernet interface,vlan,ethernet interface + vlan. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.4 |
| hwBdMacLimitBdId The bd id which will be configured mac-limit. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.2.1.40 |
| hwBdMacLimitMaxMac The maximum mac address. When the value is '0',
the meaning is that there isn't limiting rule to
the mac-address number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.2.1.41 |
| hwPwOverLdpOverGreTable A table containing the VPLS PW or EVPN over Ldp over GRE information for device. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.42 |
| hwPwSourceTunnelCheckTable This table is used to manage the check on a PW's source port tunnel. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.43 |
| hwBoardServiceMisMatchAlarmTable This table is used to query the information table about the alarm that the interface board does not support this service. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.44 |
| hwEVPNNotSupportTunnelTable This table is used to manage information about the alarm for tunnel types that the EVPN public network does not support. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.45 |
| hwVPLSNotSupportTunnelTable This table is used to manage tunnels that the VPLS public network does not support. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.46 |
| hwNotSupportTunnelType This object indicates the alarm that the EVPN public network does not support traffic forwarding. | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.42.2.1.47 |
| hwPVSuppressionStatisticTable This table contains statistics about suppressed packets and bytes based on a Layer 2 interface and a VLAN. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.48 |
| hwPortSuppressionStatisticTable This table contains statistics about suppressed packets and bytes based on an interface and its sub-interface. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.49 |
| hwMacUsageTable This table is used to query Layer 2 information on a board. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.5 |
| hwMacAccountStatisticTable This table is used to manage MAC accounting statistics. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.50 |
| hwNodeSrteLoadBanlanceTable This table is used to manage parameters of alarms that are generated because load balancing among node SR TE tunnels is not supported. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.51 |
| hwVllVpnQosNotSupportTunnelTable A table containing the vll information for device. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.52 |
| hwL2DomainMacLimitAlarmTable MAC usage table | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.53 |
| hwVxlanTnlMacLimitSourceIp The vxlan tunnel source ip which will be configured mac-limit. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.42.2.1.54 |
| hwVxlanTnlMacLimitPeerIp The vxlan tunnel peer ip which will be configured mac-limit. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.42.2.1.55 |
| hwVxlanTnlMacLimitMaxMac The maximum mac address. When the value is '0',
the meaning is that there isn't limiting rule to
the mac-address number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.2.1.56 |
| hwTunnelNotSupportInterfaceTable The table is used to define variables in traps. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.57 |
| hwServiceNotSupportDscpSrteTable This table is used to manage parameters of alarms that are generated because DSCP SRTE is not supported for service. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.58 |
| hwNotSupportTeOverGreTable This table is used to manage parameters of alarms that are generated because DSCP SRTE is not supported for service. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.59 |
| hwdbCfg3tupleFdbTable The layer 2 configured mac-address forwarding table .The table that
contains the layer 2 mac-address forwarding information
currently operating on this device. | table | - | .1.3.6.1.4.1.2011.5.25.42.2.1.6 |
| hwVlanMacLimitVlanId The bd id which will be configured mac-limit. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.2.1.61 |
| hwVlanMacLimitMaxMac The maximum mac address. When the value is '0',
the meaning is that there isn't limiting rule to
the mac-address number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.2.1.62 |
| hwPortMacLimitMaxMac The maximum mac address. When the value is '0',
the meaning is that there isn't limiting rule to
the mac-address number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.2.1.64 |
| hwL2MacTraps | node | - | .1.3.6.1.4.1.2011.5.25.42.2.1.7 |
| hwUntargetMacNum The number of untarget mac-address. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.25.42.2.1.8 |
| hwMacAgingTime The interval that the hardware deletes any entry
whose hit bit is cleared and clears the hit bit
of the remaining entries.The default value is 300 seconds.'0'means the MAC entr… | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.42.2.1.9 |