hwNotSupportTunnelType

HUAWEI-L2MAM-MIB · .1.3.6.1.4.1.2011.5.25.42.2.1.47
MIB view Table view

Object

scalar Enumeration 
This object indicates the alarm that the EVPN public network does not support traffic forwarding.

Context

MIB
HUAWEI-L2MAM-MIB
OID
.1.3.6.1.4.1.2011.5.25.42.2.1.47
Type
scalar
Access
notifyonly
Status
current
Parent
hwL2MAMObjects
Siblings
62

Syntax

Enumeration

Values & Constraints

Enumerated Values
1bgpovergre
2bgpoverldpovergre
3ldpovergre
4bgp
5vpnqosovergre

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwL2MaxMacLimit
The maximum of Mac-address limit rule.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.2.1.1
hwMacRestrict
This object indicates whether MAC address learning restrict has been enabled for the system.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.2.1.10
hwPortSecurityTable
A table containing the port security information for device. It can protect the port from inaccessible mac.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.11
hwMacLimitGlobalRuleTable
This table is used to query restriction rules on global MAC address learning.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.12
hwMacLimitApplyRuleTable
A table containing the global mac-address learning-limit rules and apply ports.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.13
hwMacGlobalStatistics
The number of the global mac-address items.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.2.1.14
hwMacIfStatisticsTable
A table showing the number of mac-address items by interface index.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.15
hwMacSlotStatisticsTable
This table is used to describe MAC capacity statistics on an interface board.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.16
hwMacVlanStatisticsTable
A table showing the number of mac-address items by VLAN ID.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.17
hwMacVsiStatisticsTable
A table showing the number of mac-address items by VSI name.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.18
hwPwMacLimitTable
This table is used to query MAC address learning suppression based on a PW.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.19
hwdbCfgFdbTable
This table is used to configure a VLAN-based, VSI-based, or global blackhole-based MAC address table or static MAC address table.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.2
hwMacSpoofingDefendTable
A table enable the MAC spoofing defend.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.20
hwDiscardIllegalMacEnable
When this object is set to 'enabled(1)' illegal MAC will be discarded.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.2.1.21
hwDiscardIllegalMacAlarm
When this object is set to 'enabled(1)' discard illegal MAC alarm is enabled else disabled.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.2.1.22
hwMacSpoofingDefend
When this object is set to 'enabled(1)' MAC spoofing defend is enabled on global else disabled.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.2.1.23
hwL2MacFlappingTrapObjectsnode-.1.3.6.1.4.1.2011.5.25.42.2.1.24
hwSlotMacLimitTable
This is a rule table for SLOT-based MAC learning limit.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.25
hwL2ProtocolTunnelTrapObjectsnode-.1.3.6.1.4.1.2011.5.25.42.2.1.26
hwL2ProtclTnlStdTable
Group-MAC configuration table of standard L2 protocol tunnel.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.27
hwL2ProtclTnlCusTable
Group-MAC configuration table of customize L2 protocol tunnel.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.28
hwL2ProtclTnlEnableTable
Port configuration table of L2 protocol tunnel.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.29
hwdbDynFdbTable
This table is used to manage a device's dynamic MAC address table. Data in this table is generated after the device automatically learns MAC addresses and ages. Data in this table…
table-.1.3.6.1.4.1.2011.5.25.42.2.1.3
hwL2ProtclTnlStatisticsTable
Statistics table of L2 protocol tunnel.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.30
hwBridgeMacAgingTime
The interval that the hardware deletes any entry whose hit bit is cleared and clears the hit bit of the remaining entries.The default value is 300 seconds.'0'means the MAC entr…
scalarInteger32.1.3.6.1.4.1.2011.5.25.42.2.1.31
hwCfgMacAddrQueryTable
The query table of layer 2 Configured mac-address forwarding table.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.32
hwDynMacAddrQueryTable
The query table of layer 2 dynamic mac-address forwarding table.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.33
hwMacInfoQueryTable
The MAC address information of layer 2 mac-address database.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.34
hwVplsOverGreTable
A table containing the VPLS over GRE information for device.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.35
hwVllByPassOverGreTable
A table containing the ByPass PW for VLL over GRE information for device.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.36
hwUnucFlowAlarmTable
A table containing the unknown unicast alarm information for interface.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.37
hwMacHopAlarmTable
A table containing the mac hop alarm information.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.38
hwPwMacSpoofingAttackMacAddr
A unicast MAC address for PW mac spoofing.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.2011.5.25.42.2.1.39
hwMacLimitTable
A table containing the mac-address learning-limit rule information for device. It can limit on ethernet interface,vlan,ethernet interface + vlan.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.4
hwBdMacLimitBdId
The bd id which will be configured mac-limit.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.2.1.40
hwBdMacLimitMaxMac
The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.2.1.41
hwPwOverLdpOverGreTable
A table containing the VPLS PW or EVPN over Ldp over GRE information for device.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.42
hwPwSourceTunnelCheckTable
This table is used to manage the check on a PW's source port tunnel.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.43
hwBoardServiceMisMatchAlarmTable
This table is used to query the information table about the alarm that the interface board does not support this service.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.44
hwEVPNNotSupportTunnelTable
This table is used to manage information about the alarm for tunnel types that the EVPN public network does not support.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.45
hwVPLSNotSupportTunnelTable
This table is used to manage tunnels that the VPLS public network does not support.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.46
hwPVSuppressionStatisticTable
This table contains statistics about suppressed packets and bytes based on a Layer 2 interface and a VLAN.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.48
hwPortSuppressionStatisticTable
This table contains statistics about suppressed packets and bytes based on an interface and its sub-interface.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.49
hwMacUsageTable
This table is used to query Layer 2 information on a board.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.5
hwMacAccountStatisticTable
This table is used to manage MAC accounting statistics.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.50
hwNodeSrteLoadBanlanceTable
This table is used to manage parameters of alarms that are generated because load balancing among node SR TE tunnels is not supported.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.51
hwVllVpnQosNotSupportTunnelTable
A table containing the vll information for device.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.52
hwL2DomainMacLimitAlarmTable
MAC usage table
table-.1.3.6.1.4.1.2011.5.25.42.2.1.53
hwVxlanTnlMacLimitSourceIp
The vxlan tunnel source ip which will be configured mac-limit.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.42.2.1.54
hwVxlanTnlMacLimitPeerIp
The vxlan tunnel peer ip which will be configured mac-limit.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.42.2.1.55
hwVxlanTnlMacLimitMaxMac
The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.2.1.56
hwTunnelNotSupportInterfaceTable
The table is used to define variables in traps.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.57
hwServiceNotSupportDscpSrteTable
This table is used to manage parameters of alarms that are generated because DSCP SRTE is not supported for service.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.58
hwNotSupportTeOverGreTable
This table is used to manage parameters of alarms that are generated because DSCP SRTE is not supported for service.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.59
hwdbCfg3tupleFdbTable
The layer 2 configured mac-address forwarding table .The table that contains the layer 2 mac-address forwarding information currently operating on this device.
table-.1.3.6.1.4.1.2011.5.25.42.2.1.6
hwVlanMacLimitVlanId
The bd id which will be configured mac-limit.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.2.1.61
hwVlanMacLimitMaxMac
The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.2.1.62
hwPortMacLimitPortName
The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
scalarOctetString.1.3.6.1.4.1.2011.5.25.42.2.1.63
hwPortMacLimitMaxMac
The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.2.1.64
hwL2MacTrapsnode-.1.3.6.1.4.1.2011.5.25.42.2.1.7
hwUntargetMacNum
The number of untarget mac-address.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.2011.5.25.42.2.1.8
hwMacAgingTime
The interval that the hardware deletes any entry whose hit bit is cleared and clears the hit bit of the remaining entries.The default value is 300 seconds.'0'means the MAC entr…
scalarInteger32.1.3.6.1.4.1.2011.5.25.42.2.1.9