hwIsisCircIpIgnore
HUAWEI-ISIS-CONF-MIB ·
.1.3.6.1.4.1.2011.5.25.24.2.1.21.1.22
Object
column
r/w
Enumeration
The value of this object identifies whether the segment in an IP address is checked: enable(1): indicates that the segment in an IP address is not checked. disable(2): indicates that the segment in an IP address is checked. By default, the segment in an IP address is checked. This object applies to only P2P interfaces.
Context
- MIB
- HUAWEI-ISIS-CONF-MIB
- OID
.1.3.6.1.4.1.2011.5.25.24.2.1.21.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwIsisIntfBaseEntry
- Table
- hwIsisIntfBaseTable
- Siblings
- 40
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIsisInterfaceIndex The value of this object identifies the interface index. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.1 |
| hwIsisCircL1AuthMode The value of this object identifies the mode of authenticating Level-1 Hello PDUs:
null(0): indicates that area-based authentication is not configured.
md5(1): indicates that the … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.10 |
| hwIsisCircL1AuthText The value of this object identifies the authentication password of Level-1 Hello packets. The password is a string of characters.
If the packet authentication mode is simple, the … | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.11 |
| hwIsisCircL1AuthSendOnly The value of this object identifies the mode of sending the authentication password of Level-1 Hello PDUs:
true(1): indicates that the passwords in only the sent PDUs are authenti… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.12 |
| hwIsisCircL1AuthCode The value of this object identifies the authentication code of Level-1 Hello PDUs:
none(0): indicates that no authentication is configured.
osi(10): indicates OSI authentication.
… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.13 |
| hwIsisCircL2AuthMode The value of this object identifies the mode of authenticating Level-2 Hello PDUs:
null(0): indicates that area-based authentication is not configured.
md5(1): indicates that pass… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.14 |
| hwIsisCircL2AuthText The value of this object identifies the authentication password of Level-2 Hello packets. The password is a string of characters.
If the packet authentication mode is simple, the … | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.15 |
| hwIsisCircL2AuthSendOnly The value of this object identifies the mode of sending the authentication password of Level-2 Hello PDUs:
true(1): indicates that the passwords in only the sent PDUs are authenti… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.16 |
| hwIsisCircL2AuthCode The value of this object identifies the authentication code of Level-2 Hello PDUs:
none(0): indicates that no authentication is configured.
osi(10): indicates OSI authentication.
… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.17 |
| hwIsisCircLdpSync The value of this object identifies the status of synchronization of IS-IS and LDP:
enable(1): enables synchronization of IS-IS and LDP.
disable(2): disables synchronization of IS… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.18 |
| hwIsisCircLdpSyncHoldDown The value of this object identifies the timeout period of the Holddown time for synchronization of IS-IS and LDP.
The value ranges from 0 to 65535, in seconds. By default, the va… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.19 |
| hwIsisEnableIPProtocol The value of this object identifies the status of IPv4 IS-IS on an interface:
enable(1): enables IPv4 IS-IS.
disable(2): disables IPv4 IS-IS. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.2 |
| hwIsisCircLdpHldMaxCost The value of this object identifies the timeout period of the Hold-Max-Cost time for synchronization of IS-IS and LDP.
The value ranges from 0 to 65536, in seconds.
By default, … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.20 |
| hwIsisCircSmallHello The value of this object identifies whether IS-IS sends small Hello PDUs without the padding field:
enable(1): indicates that IS-IS sends small Hello PDUs without the padding fiel… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.21 |
| hwIsisCircSenseRpr The value of this object identifies whether fast RPR loop detection is enabled:
enable(1): enables fast RPR loop detection.
disable(2): disables fast RPR loop detection.
By defaul… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.23 |
| hwIsisCircPadHello The value of this object identifies whether IS-IS sends standard Hello PDUs with the padding field:
enable(1): indicates that IS-IS sends standard Hello PDUs with the padding fiel… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.24 |
| hwIsisCircLspRetransInterval The value of this object identifies the interval for resending LSPs.
The value ranges from 1 to 300, in seconds. The default value is 5.
This object applies to only P2P interface… | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.25 |
| hwIsisL1CsnpTimerValue The value of this object identifies the interval for sending Level-1 CSNP PDUs on an interface.
The value ranges from 1 to 65535, in seconds. The default value is 10. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.26 |
| hwIsisL2CsnpTimerValue The value of this object identifies the interval for sending Level-2 CSNP PDUs on an interface.
The value ranges from 1 to 65535, in seconds. The default value is 10. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.27 |
| hwIsisLspThrottleInterval The value of this object identifies the interval for sending batch of LSPs or CSNPs on an interface. The value ranges from 1 to 10000, in milliseconds.
By default, the value is 5… | column | milliseconds. Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.28 |
| hwIsisLspThrottleCount The value of this object identifies the number of a bundle of LSPs. The value ranges from 1 to 1000.
By default, it is 10. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.29 |
| hwIsisEnableIPv6Protocol The value of this object identifies the status of IPv6 IS-IS on an interface:
enable(1): enables IPv6 IS-IS.
disable(2): disables IPv6 IS-IS. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.3 |
| hwIsisCircL1DisPriority The value of this object identifies the priority of the Level-1 DIS, which is valid only on a broadcast interface.
The value ranges from 0 to 127. By default, it is 64. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.30 |
| hwIsisCircL2DisPriority The value of this object identifies the priority of the Level-2 DIS, which is valid only on a broadcast interface.
The value ranges from 0 to 127. By default, it is 64. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.31 |
| hwIsisCircSilent The value of this object identifies whether the status of an IS-IS interface is set to silent.
enable(1): indicates that the status of IS-IS interface is set to silent.
disable(2)… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.32 |
| hwIsisCircMeshGroup The value of this object identifies the mesh-group ID. The value ranges from 0 to 4294967295. Value 0 indicates that the mesh-group ID is not set. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.33 |
| hwIsisCircMeshBlock The value of this object identifies the mesh block function. If this function is configured, the set mesh-group ID is deleted. The value of this object can be:
enable(1): enables … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.34 |
| hwIsisCircDisName The value of this object identifies the DIS name of an interface.
The configuration is applicable to only a broadcast interface. The value is a string of 0 to 64 characters.
Val… | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.35 |
| hwIsisCircPppNego The value of this object identifies the mode of negotiating the setup of a neighbor relationship on P2P interfaces:
none(0): indicates that the negotiation mode used to establish … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.36 |
| hwIsisCircPppOsicpCheck The value of this object identifies whether the OSICP check is required:
enable(1): enables the OSICP check.
disable(2): disables the OSICP check.
By default, the function is disa… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.37 |
| hwIsisIntfRowStatus The value of this object identifies the setting of two values:
createAndGo(4): creates one row.
destroy(6): deletes one row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.38 |
| hwIsisCircL1AuthKeychainName The value of this object identifies the keychain name of Level-1 Hello packets. The keychain name is a string of characters.
The name is a string of 0 to 47 characters. The length… | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.39 |
| hwIsisCircLevel The value of this object identifies the level of an interface:
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.
By default, the interfa… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.4 |
| hwIsisCircL2AuthKeychainName The value of this object identifies the keychain name of Level-2 Hello packets. The keychain name is a string of characters.
The name is a string of 0 to 47 characters. The length… | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.40 |
| hwIsisCircStrictSnpaCheckEnable The value of this object identifies whether the snpa check of lsp and snp is required.
enable(1): enables the snpa check.
disable(2): disables the snpa check.
By default, the func… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.41 |
| hwIsisCircSimulation The value of this object identifies whether the broadcast interface is simulated as a P2P interface:
enable(1): indicates that the broadcast interface is simulated as a P2P interf… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.5 |
| hwIsisCircL1HelloInterval The value of this object identifies the interval for sending Level-1 Hello PDUs.
The value ranges from 3 to 255, in seconds. By default, the value is 10s. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.6 |
| hwIsisCircL2HelloInterval The value of this object identifies the interval for sending Level-2 Hello PDUs.
The value ranges from 3 to 255, in seconds. By default, the value is 10s. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.7 |
| hwIsisCircL1HelloMultiplier The value of this object identifies the number of Level-1 Hello PDUs that fail to received from the IS-IS neighbor before the neighbor declared Down.
The value ranges from 3 to 1… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.8 |
| hwIsisCircL2HelloMultiplier The value of this object identifies the number of Level-2 Hello PDUs that fail to received from the IS-IS neighbor before the neighbor declared Down.
The value ranges from 3 to 1… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.9 |