hwAclv6AdvancedRowStatus
HUAWEI-IPDSLAM-ACLV6-MIB ·
.1.3.6.1.4.1.2011.5.112.1.3.1.27
Object
Indicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create an advanced ACLv6 rule
3. destroy(6) -delete an advanced ACLv6 rule and clear the packet statistics of an advanced ACLv6 rule
It is used for creating or deleting an advanced ACLv6 rule and clearing the packet statistics of an advanced ACLv6 rule.
To create an advanced ACLv6 rule, enter hwAclv6AdvancedAct and set hwAclv6AdvancedRowStatus to createAndGo(4).
Other parameters are optional. The operator of the source port and destination port and port 1 and port 2 take effect only
when the protocol type is specified as TCP or UDP.
Port 2 needs to be specified only when the port operator character is specified as a value range.
The IDs of the two ports are not differentiated, which are automatically adjusted after delivery.
hwAclv6AdvancedIcmpv6Type and hwAclv6AdvancedIcmpv6Code are specified only when the protocol type is ICMP.
To delete an advanced ACLv6 rule, set hwAclv6AdvancedRowStatus to destroy(6).
To clear the statistics of packets that match the advanced ACLv6 rules,
set hwAclv6AdvancedCountClear to cleared(1) and hwAclv6AdvancedRowStatus to createAndGo(4).
When this leaf is queried, the value is fixed to active(1).
Context
- MIB
- HUAWEI-IPDSLAM-ACLV6-MIB
- OID
.1.3.6.1.4.1.2011.5.112.1.3.1.27- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAclv6AdvancedRuleEntry
- Table
- hwAclv6AdvancedRuleTable
- Siblings
- 26
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAclv6AdvancedAclNum Uniquely identifies an advanced ACLv6 group.
Range: 3000-3999
Make sure that the ID of the ACLv6 group is already created in hwAclv6NumGroupTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.112.1.3.1.1 |
| hwAclv6AdvancedSrcPort2 Describes the operation value of port 2 in the comparison operation types of the source port in hwAclv6AdvancedSrcOp
when hwAclv6AdvancedProtocol is set to TCP or UDP.
Range: 0-… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.5.112.1.3.1.10 |
| hwAclv6AdvancedDestIpAddressType Destination IP address type of the advanced ACLv6 rule.
A value that represents a type of Internet address.
Options:
1. unknown(0) -An unknown address type. This value must be us… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.112.1.3.1.11 |
| hwAclv6AdvancedDestIpAddress Describes destination IP address of the advanced ACLv6 rule.
Denotes a generic Internet address.
An InetAddress value is always interpreted within the context
of an… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.112.1.3.1.12 |
| hwAclv6AdvancedDestIpAddressPrefixLength Describes destination IP address prefix length of the advanced ACLv6 rule.
Denotes the length of a generic Internet network address
prefix. A value of n corresponds to an IP addr… | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.2011.5.112.1.3.1.13 |
| hwAclv6AdvancedDestOp Describes destination port operation symbol of the advanced ACLv6 rule
when the hwAclv6AdvancedProtocol is TCP or UDP.
Options:
1. lt(1) -indica… | column | Enumeration | .1.3.6.1.4.1.2011.5.112.1.3.1.14 |
| hwAclv6AdvancedDestPort1 Describes the operation value of port 1 in the comparison operation types of the destination port in hwAclv6AdvancedDestOp
when hwAclv6AdvancedProtocol is set to TCP or UDP.
Ran… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.5.112.1.3.1.15 |
| hwAclv6AdvancedDestPort2 Describes the operation value of port 2 in the comparison operation types of the destination port in hwAclv6AdvancedDestOp
when hwAclv6AdvancedProtocol is set to TCP or UDP.
Ran… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.5.112.1.3.1.16 |
| hwAclv6AdvancedPrecedence Describes the priority field of data frames that an advanced ACLv6 rule needs to match.
If the value is not specified for an advanced ACLv6 rule, the invalid value -1 is obtained… | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.17 |
| hwAclv6AdvancedTos Describes the type of service (ToS) field of data frames that an advanced ACLv6 rule needs to match.
Range: 0-15, -1
If the value is not specified for an advanced … | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.18 |
| hwAclv6AdvancedDscp Describes the differentiated services code point (DSCP) value of data frames that an advanced ACLv6 rule needs to match.
Range: 0-63, -1
If the value is not speci… | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.19 |
| hwAclv6AdvancedSubitem Describes the ID of an advanced ACLv6 rule in an advanced ACLv6 group, uniquely identifying an advanced ACLv6 rule.
Range: 0-4294967295
In the create operation, if… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.112.1.3.1.2 |
| hwAclv6AdvancedTimeRangeName Describes the time range name of a rule.
It is used when the effective time of a rule needs to be configured.
If hwAclv6AdvancedTimeRangeName is not set, the rule is valid all t… | column | OctetString | .1.3.6.1.4.1.2011.5.112.1.3.1.20 |
| hwAclv6AdvancedIcmpv6Type Describes the ICMPv6 type when packets are filtered by ICMPv6 type and when hwAclv6AdvancedProtocol is set to ICMPv6.
Range: 0-255, -1
If the value is not specified… | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.21 |
| hwAclv6AdvancedIcmpv6Code Describes ICMPv6 codes that the ICMPv6 packets are filtered both by ICMPv6 type and ICMP code when hwAclv6AdvancedProtocol is set to ICMPv6.
Range: 0-255, -1
If the value is not … | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.22 |
| hwAclv6AdvancedEnable Describes whether an advanced ACLv6 rule is valid.
Options:
1. true(1) -indicates that an advanced ACLv6 rule is valid
2. false(2) -indicates that an advanced ACLv6 rule is inva… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.112.1.3.1.23 |
| hwAclv6AdvancedCount Describes the statistics of packets that match the rule. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.112.1.3.1.24 |
| hwAclv6AdvancedCountClear Clears the statistics of packets that match the rule.
Options:
1. cleared(1) -clear the statistics of packets that match the advanced ACLv6 rules
2. nouse(2) -indicates no opera… | column | Enumeration | .1.3.6.1.4.1.2011.5.112.1.3.1.25 |
| hwAclv6AdvancedPriority Describes the priority of a rule.
Range: 0-9
Default: 0
The priority ascends with the value.
When multiple rules are matched at the same time, the rule with the hi… | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.26 |
| hwAclv6AdvancedAct Describes the action of a rule.
Options:
1. permit(1) -indicates that the data packets that meet the conditions can pass
2. deny(2) -indicates that the data packets that meet … | column | Enumeration | .1.3.6.1.4.1.2011.5.112.1.3.1.3 |
| hwAclv6AdvancedProtocol Describes the protocol of IP packets that matches an advanced ACLv6 rule.
Range: 0-255
Default: 0
Common protocols:
GRE tunneling(47)
Internet Control … | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.4 |
| hwAclv6AdvancedSrcIpAddressType Describes the ip-address type of the rule.
The value represents a type of Internet address.
Options:
1. unknown(0) -An unknown address type. This value must be us… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.112.1.3.1.5 |
| hwAclv6AdvancedSrcIpAddress Describes source IP address of the rule.
Denotes a generic Internet address.
An InetAddress value is always interpreted within the context
of an InetAddressType val… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.112.1.3.1.6 |
| hwAclv6AdvancedSrcIpAddressPrefixLength Describes source IP address prefix length of the rule.
Denotes the length of a generic Internet network address
prefix. A value of n corresponds to an IP address mask
that has n … | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.2011.5.112.1.3.1.7 |
| hwAclv6AdvancedSrcOp Describes the operation types of comparing packet source ports when the type of hwAclv6AdvancedProtocol is set to TCP or UDP.
Range: 0-5
Options:
1. lt(1) -i… | column | Enumeration | .1.3.6.1.4.1.2011.5.112.1.3.1.8 |
| hwAclv6AdvancedSrcPort1 Describes the operation value of port 1 in the comparison operation types of the source port in hwAclv6AdvancedSrcOp
when hwAclv6AdvancedProtocol is set to TCP or UDP.
Range: 0-… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.5.112.1.3.1.9 |