hwAclv6AdvancedProtocol
HUAWEI-IPDSLAM-ACLV6-MIB ·
.1.3.6.1.4.1.2011.5.112.1.3.1.4
Object
column
r/w
Integer32
Describes the protocol of IP packets that matches an advanced ACLv6 rule.
Range: 0-255
Default: 0
Common protocols:
GRE tunneling(47)
Internet Control Message Protocol6(58)
Any IP protocol(0)
IPv6-Authentication header(51)
IPv6 Encapsulating Security Payload(50)
OSPF routing protocol(89)
Transmission control protocol(6)
User Datagram protocol(17)
Context
- MIB
- HUAWEI-IPDSLAM-ACLV6-MIB
- OID
.1.3.6.1.4.1.2011.5.112.1.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAclv6AdvancedRuleEntry
- Table
- hwAclv6AdvancedRuleTable
- Siblings
- 26
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAclv6AdvancedAclNum Uniquely identifies an advanced ACLv6 group.
Range: 3000-3999
Make sure that the ID of the ACLv6 group is already created in hwAclv6NumGroupTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.112.1.3.1.1 |
| hwAclv6AdvancedSrcPort2 Describes the operation value of port 2 in the comparison operation types of the source port in hwAclv6AdvancedSrcOp
when hwAclv6AdvancedProtocol is set to TCP or UDP.
Range: 0-… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.5.112.1.3.1.10 |
| hwAclv6AdvancedDestIpAddressType Destination IP address type of the advanced ACLv6 rule.
A value that represents a type of Internet address.
Options:
1. unknown(0) -An unknown address type. This value must be us… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.112.1.3.1.11 |
| hwAclv6AdvancedDestIpAddress Describes destination IP address of the advanced ACLv6 rule.
Denotes a generic Internet address.
An InetAddress value is always interpreted within the context
of an… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.112.1.3.1.12 |
| hwAclv6AdvancedDestIpAddressPrefixLength Describes destination IP address prefix length of the advanced ACLv6 rule.
Denotes the length of a generic Internet network address
prefix. A value of n corresponds to an IP addr… | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.2011.5.112.1.3.1.13 |
| hwAclv6AdvancedDestOp Describes destination port operation symbol of the advanced ACLv6 rule
when the hwAclv6AdvancedProtocol is TCP or UDP.
Options:
1. lt(1) -indica… | column | Enumeration | .1.3.6.1.4.1.2011.5.112.1.3.1.14 |
| hwAclv6AdvancedDestPort1 Describes the operation value of port 1 in the comparison operation types of the destination port in hwAclv6AdvancedDestOp
when hwAclv6AdvancedProtocol is set to TCP or UDP.
Ran… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.5.112.1.3.1.15 |
| hwAclv6AdvancedDestPort2 Describes the operation value of port 2 in the comparison operation types of the destination port in hwAclv6AdvancedDestOp
when hwAclv6AdvancedProtocol is set to TCP or UDP.
Ran… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.5.112.1.3.1.16 |
| hwAclv6AdvancedPrecedence Describes the priority field of data frames that an advanced ACLv6 rule needs to match.
If the value is not specified for an advanced ACLv6 rule, the invalid value -1 is obtained… | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.17 |
| hwAclv6AdvancedTos Describes the type of service (ToS) field of data frames that an advanced ACLv6 rule needs to match.
Range: 0-15, -1
If the value is not specified for an advanced … | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.18 |
| hwAclv6AdvancedDscp Describes the differentiated services code point (DSCP) value of data frames that an advanced ACLv6 rule needs to match.
Range: 0-63, -1
If the value is not speci… | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.19 |
| hwAclv6AdvancedSubitem Describes the ID of an advanced ACLv6 rule in an advanced ACLv6 group, uniquely identifying an advanced ACLv6 rule.
Range: 0-4294967295
In the create operation, if… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.112.1.3.1.2 |
| hwAclv6AdvancedTimeRangeName Describes the time range name of a rule.
It is used when the effective time of a rule needs to be configured.
If hwAclv6AdvancedTimeRangeName is not set, the rule is valid all t… | column | OctetString | .1.3.6.1.4.1.2011.5.112.1.3.1.20 |
| hwAclv6AdvancedIcmpv6Type Describes the ICMPv6 type when packets are filtered by ICMPv6 type and when hwAclv6AdvancedProtocol is set to ICMPv6.
Range: 0-255, -1
If the value is not specified… | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.21 |
| hwAclv6AdvancedIcmpv6Code Describes ICMPv6 codes that the ICMPv6 packets are filtered both by ICMPv6 type and ICMP code when hwAclv6AdvancedProtocol is set to ICMPv6.
Range: 0-255, -1
If the value is not … | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.22 |
| hwAclv6AdvancedEnable Describes whether an advanced ACLv6 rule is valid.
Options:
1. true(1) -indicates that an advanced ACLv6 rule is valid
2. false(2) -indicates that an advanced ACLv6 rule is inva… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.112.1.3.1.23 |
| hwAclv6AdvancedCount Describes the statistics of packets that match the rule. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.112.1.3.1.24 |
| hwAclv6AdvancedCountClear Clears the statistics of packets that match the rule.
Options:
1. cleared(1) -clear the statistics of packets that match the advanced ACLv6 rules
2. nouse(2) -indicates no opera… | column | Enumeration | .1.3.6.1.4.1.2011.5.112.1.3.1.25 |
| hwAclv6AdvancedPriority Describes the priority of a rule.
Range: 0-9
Default: 0
The priority ascends with the value.
When multiple rules are matched at the same time, the rule with the hi… | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.3.1.26 |
| hwAclv6AdvancedRowStatus Indicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create an advanced ACLv6 rule
3. destroy(6) … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.112.1.3.1.27 |
| hwAclv6AdvancedAct Describes the action of a rule.
Options:
1. permit(1) -indicates that the data packets that meet the conditions can pass
2. deny(2) -indicates that the data packets that meet … | column | Enumeration | .1.3.6.1.4.1.2011.5.112.1.3.1.3 |
| hwAclv6AdvancedSrcIpAddressType Describes the ip-address type of the rule.
The value represents a type of Internet address.
Options:
1. unknown(0) -An unknown address type. This value must be us… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.112.1.3.1.5 |
| hwAclv6AdvancedSrcIpAddress Describes source IP address of the rule.
Denotes a generic Internet address.
An InetAddress value is always interpreted within the context
of an InetAddressType val… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.112.1.3.1.6 |
| hwAclv6AdvancedSrcIpAddressPrefixLength Describes source IP address prefix length of the rule.
Denotes the length of a generic Internet network address
prefix. A value of n corresponds to an IP address mask
that has n … | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.2011.5.112.1.3.1.7 |
| hwAclv6AdvancedSrcOp Describes the operation types of comparing packet source ports when the type of hwAclv6AdvancedProtocol is set to TCP or UDP.
Range: 0-5
Options:
1. lt(1) -i… | column | Enumeration | .1.3.6.1.4.1.2011.5.112.1.3.1.8 |
| hwAclv6AdvancedSrcPort1 Describes the operation value of port 1 in the comparison operation types of the source port in hwAclv6AdvancedSrcOp
when hwAclv6AdvancedProtocol is set to TCP or UDP.
Range: 0-… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.5.112.1.3.1.9 |