hwOpticsSmartSFPRemoteControllable
HUAWEI-ETHERNET-OPTICMODULE-MIB ·
.1.3.6.1.4.1.2011.5.14.6.7.1.5
Object
column
Enumeration
Indicates whether the remote smart SFP optical module can control the local optical module. Options: 1. disable(1) -disable, control command from remote optical module will be ignored 2. enable(2) -enable 3. invalid(-1) -invalid value
Context
- MIB
- HUAWEI-ETHERNET-OPTICMODULE-MIB
- OID
.1.3.6.1.4.1.2011.5.14.6.7.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwOpticsSmartSFPExtModuleInformationEntry
- Table
- hwOpticsSmartSFPExtModuleInformationTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalid |
1 | disable |
2 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwOpticsSmartSFPIdentifier Indicates the type of a smart SFP optical module.
Options:
1. smartSFPI(1) -The optical module is a smart SFP I optical module
2. smartSFPII(2) -The optical… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.7.1.1 |
| hwOpticsSmartSFPDyingGaspStatus Indicates the dying-gasp status of a remote smart SFP optical module.
Options:
1. poweron(1) -remote normal power
2. poweroff(2) -remote Dying-Gasp asserted
3. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.7.1.10 |
| hwOpticsSmartSFPLocalRXOutputControl Indicates the local output control of a smart SFP optical module.
Options:
1. disable(1) -disable
2. enable(2) -enable
3. disableRxLos(3) -disable when LOS assert… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.7.1.11 |
| hwOpticsSmartSFPPilottoneControl Indicates control of outputting attenuation signals by a smart SFP optical module.
Options:
1. disable(1) -disable
2. enable(2) -enable
3. invalid(-1) -invali… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.7.1.12 |
| hwOpticsSmartSFPPilottoneStatus Indicates the carrier loopback detection status of a smart SFP optical module.
Options:
1. noSignal(1) -no signal
2. toneDetected(2) -tone detected
3. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.7.1.13 |
| hwOpticsSmartSFPLoopbackdeviceloss Indicates the optical attenuation of a remote loopback device.
Range: -1, 0-25500.
-1 is the invalid value.
Unit: 0.01db | column | 0.01db Integer32 | .1.3.6.1.4.1.2011.5.14.6.7.1.14 |
| hwOpticsSmartSFPRoundtripfiberloss Indicates the optical attenuation of an optical path.
Range: -1, 0-25500.
-1 is the invalid value.
Unit: 0.01db | column | 0.01db Integer32 | .1.3.6.1.4.1.2011.5.14.6.7.1.15 |
| hwOpticsSmartSFPExtModuleInfoRemote Indicates the operation is performed on a remote optical module.
Options:
1. remote(1) -the operation is performed on a remote optical module
2. invalid(-1) -invalid v… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.7.1.16 |
| hwOpticsSmartSFPProtocolVersion Indicates the protocol version of a smart SFP optical module.
Range: -1, 0-255.
-1 is the invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.6.7.1.2 |
| hwOpticsSmartSFPSSFPEnhancedOption Indicates the enhanced options of a smart SFP optical module.
Range: -1, 0-65535.
-1 is the invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.6.7.1.3 |
| hwOpticsSmartSFPPassword Indicates the password of a smart SFP optical module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.14.6.7.1.4 |
| hwOpticsSmartSFPSubCarrierControl Indicates sub-carrier control of a smart SFP optical module, that is,
whether the local smart SFP optical module can send signals to the remote optical module.
Options:
1. disabl… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.7.1.6 |
| hwOpticsSmartSFPSubCarrierlinkStatus Indicates the sub-carrier status of a smart SFP optical module.
Options:
1. down(1) -linked down
2. rxUp(2) -linked up in RX only
3. up(3) -linked up in bot… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.7.1.7 |
| hwOpticsSmartSFPLocalLoopback Indicates the loopback control of a local smart SFP optical module.
Options:
1. noloop(1) -no loop
2. remote(2) -local outward loop back
3. local(3) -local inward … | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.7.1.8 |
| hwOpticsSmartSFPRemoteLoopback Indicates the loopback control of a remote smart SFP optical module.
Options:
1. noloop(1) -no loop
2. remote(2) -remote outward loop back
3. invalid(-1) -invalid val… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.7.1.9 |