hwOpticsDwdmNumberOfChannels
HUAWEI-ETHERNET-OPTICMODULE-MIB ·
.1.3.6.1.4.1.2011.5.14.6.1.1.38
Object
column
SNMPv2-SMIInteger32
Number of channels. Invalid value: -1, returned if the optical module is unavailable or not supported.
Context
- MIB
- HUAWEI-ETHERNET-OPTICMODULE-MIB
- OID
.1.3.6.1.4.1.2011.5.14.6.1.1.38- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwOpticsModuleInformationEntry
- Table
- hwOpticsModuleInformationTable
- Siblings
- 40
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwOpticsMDIdentifier Indicate the identifier of optical module.
Options:
1. unknown(1) -unknown the identifier of optical module
2. gbic(2) -the identifi… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.1 |
| hwOpticsMDLengthCopper Indicate Link length supported for copper.
Unit: 1m | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.10 |
| hwOpticsMDVendorName Indicate the vendor name of a optical module. | column | OctetString | .1.3.6.1.4.1.2011.5.14.6.1.1.11 |
| hwOpticsMDVendorOUI Indicate the vendor IEEE company ID of a optical module. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.12 |
| hwOpticsMDVendorPN Indicate the part number of a optical module provided by vendor. | column | OctetString | .1.3.6.1.4.1.2011.5.14.6.1.1.13 |
| hwOpticsMDVendorRev Indicate the revision level for part number provided by vendor. | column | OctetString | .1.3.6.1.4.1.2011.5.14.6.1.1.14 |
| hwOpticsMDWaveLength The laser wavelength.
Unit: 1nm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.15 |
| hwOpticsMDCcBase The check code for base ID fields(one byte). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.16 |
| hwOpticsMDOptions Options:
1. rateSelect(1) -RATE_SELECT is implemented
2. txDisableAndTheSerialOutputDisabled(2) -TX_DISABLE is implemented… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.17 |
| hwOpticsMDBrMax The upper bit rate margin. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.18 |
| hwOpticsMDBrMin The lower bit rate margin. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.19 |
| hwOpticsMDExtID Indicate the extended type of optical module.
Options:
1. notSpecifiedOrNotCompliant(1) -the extended type of optical module is notSpecifiedOrNotCompliant
2. moddef1(2) … | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.2 |
| hwOpticsMDVendorSN The serial number of a optical module provided by vendor. | column | OctetString | .1.3.6.1.4.1.2011.5.14.6.1.1.20 |
| hwOpticsMDDateCode The date code of a optical module. | column | OctetString | .1.3.6.1.4.1.2011.5.14.6.1.1.21 |
| hwOpticsMDDiagnosticMonitoringType Indicate the diagnostic monitoring type.
Options:
1. internallyCalibrated(1) -the diagnostic monitoring type is internallyCalibrated
2. externallyCalibrated(2) -the diagnosti… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.22 |
| hwOpticsMDEnhancedOptions Indicate enhanced Options.
Options:
1. forAllMonitoredQuantities(1) -optional Alarm/warning flags implemented for all monitored quantities
2. txDisable(2) -optiona… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.23 |
| hwOpticsMDSFF8472Compliance Indicate the SFF-8472 standard.
Options:
1. undefined(1) -not included or undefined.
2. includesSFF8472V93(2) -includes functionality described in SFF-8472 Rev 9.3.… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.24 |
| hwOpticsMDCcExt Check code for the Extended ID Fields. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.25 |
| hwOpticsMDVendorSpecific Vendor of Optical module specific information. | column | OctetString | .1.3.6.1.4.1.2011.5.14.6.1.1.26 |
| hwOpticsMDCLEICode CLEI code supported by eSFP. Length is 10 bytes. | column | OctetString | .1.3.6.1.4.1.2011.5.14.6.1.1.27 |
| hwOpticsMDInfoRemote Indicates the operation is performed on a remote optical module.
Options:
1. remote(1) -the operation is performed on a remote optical module
2. invalid(-1) -invalid v… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.28 |
| hwOpticsMDSFPPulsCableTech Indicates the cable specification compliance.
Options:
1. passiveCable(1) -Passive Cable
2. activeCable(2) -Active Cable
2. invalid(-1) -invalid value | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.29 |
| hwOpticsMDConnector Indicate the type of optical module connector.
Options:
1. unknown(1) -unknown the type of optical module connector
2. sc(2) -the type of optica… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.3 |
| hwOpticsMDSFPRateId Indicates the cable specification compliance.
Options:
1. sff8079(1) -Defined for SFF-8079 (4/2/1G Rate_Select & AS0/AS1)
2. sff8431RX(2) -Defined for SFF-8431 (8/4/2G… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.30 |
| hwOpticsMDLength50MicronOM3 Indicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 50 micron multi-mode OM2 [2000MHz*km]
fiber.
The maximum v… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.31 |
| hwOpticsDwdmClass Extended identifier: WDM class.
Options:
1. noWdm(1) -no WDM
2. cwdm(2) -CWDM
3. dwdm(3) -DWDM
4. invalid(-1) -invalid value | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.32 |
| hwOpticsDwdmPower Extended identifier: Power level.
Options:
1. dwdmPowerLevel1(1) -The power is lower than 1W.
2. dwdmPowerLevel2(2) -The power is between 1W and 1.5W.
3. dwdmPowerLevel3(3) … | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.33 |
| hwOpticsDwdmMaxTemperature Max temperature.
Invalid value: 2147483647, returned if the optical module is unavailable or not supported.
Unit: 0.000001C | column | 0.000001C SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.34 |
| hwOpticsDwdmMinTemperature Min temperature.
Invalid value: 2147483647, returned if the optical module is unavailable or not supported.
Unit: 0.000001C | column | 0.000001C SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.35 |
| hwOpticsDwdmMaxSupplyCurrent Max supply current.
Invalid value: 2147483647, returned if the optical module is unavailable or not supported.
Unit: 0.000001A | column | 0.000001A SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.36 |
| hwOpticsDwdmChannelSpacing Fibre channel spacing.
Options:
1. channelSpacing200G(1) -The fibre channel spacing is 200GHz.
2. channelSpacing100G(2) -The fibre channel spacing is 100GHZ.… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.37 |
| hwOpticsDwdmWaveLength Laser wavelength.
Invalid value: -1, returned if the optical module is unavailable or not supported.
Unit: 0.01nm | column | 0.01nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.39 |
| hwOpticsMDEncoding Indicate the encoding mechanism.
Options:
1. unspecified(1) -the encoding mechanism is unspecified
2. encodingMethod8B10B(2) -the encoding mechanism is encodingMetho… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.4 |
| hwOpticsModuleUserEeprom Optics module user EEPROM information. | column | OctetString | .1.3.6.1.4.1.2011.5.14.6.1.1.40 |
| hwOpticsMDSFF8636Compliance Indicate the SFF-8636 standard.
Options:
1. undefined(1) -not included or undefined.
2. includesSFF8436V48OrEarlier(2) -includes functionality describe… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.6.1.1.41 |
| hwOpticsMDBrNominal Nominal bit rate.
Unit: 100 MBits/sec | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.5 |
| hwOpticsMDLength9Micronkm Indicate the link length that is supported by the transceiver while operating in
compliance with the applicable standards using 9 micron Single-mode Fiber.
The maximum value is 2… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.6 |
| hwOpticsMDLength9Micron Indicate the link length that is supported by the transceiver while operating in
compliance with the applicable standards using 9 micron Single-mode Fiber.
The maximum value is 25… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.7 |
| hwOpticsMDLength50Micron Indicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 50 micron multi-mode OM2 [500MHz*km]
fiber.
The maximum va… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.8 |
| hwOpticsMDLength62Micron5 Indicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 62.5 micron multi-mode OM1 [200 MHz*km]
fiber.
The maximum… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.6.1.1.9 |