hwSRv6TunnelHardwareOverloadTrap
HUAWEI-ETHERLIKE-EXT-MIB ·
.1.3.6.1.4.1.2011.5.14.10.2.0.82
Object
notification
This trap is sent when the segment-routing ipv6 tunnel hardware occupancy in the system exceeds the upper threshold.
Context
- MIB
- HUAWEI-ETHERLIKE-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.14.10.2.0.82- Type
- notification
- Status
- current
- Parent
- hwEthernetAlarmTrapsOids
- Siblings
- 82
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAlarmEthernetPortOffline Alarm description: port offline
explanation: LAN port offline, the line is not connected
resolving method: change the line or check the peer port
alarm description: the port is of… | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.1 |
| hwAlarmLOLOccurInBITSInputPort This trap is sent when the loss of link (LOL) occurs in the BITS input port. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.10 |
| hwAlarmEthernetPortStatusChanges This trap is sent when the Ethernet port link status changes from up to down. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.11 |
| hwAlarmOpticalTransceiverAbsence This trap is sent when the optical transceiver is absence. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.12 |
| hwAlarmLOSOccurs This trap is sent when the LOS occurs on the Ethernet optical port. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.13 |
| hwAlarmLinkBetweenStackPortsFails This trap is sent when the Link between stack ports fails. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.14 |
| hwAlarmUpstreamEthernetPortConnectRecover This trap is sent when the upstream ethernet port connection failure recovers or the state of it is normal. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.15 |
| hwAlarmOpticalPortTemperatureRecover This trap is sent when the temperature of the Ethernet optical port recovers to the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.16 |
| hwAlarmBITSInputRecover This trap is sent when the BITS input port recovers from loss of link (LOL). | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.17 |
| hwAlarmEthernetPortLinkStatusChange This trap is sent when the Ethernet port link status changes from down to up. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.18 |
| hwAlarmOpticalTransceiverRecover This trap is sent when the optical transceiver recovers to the normal state. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.19 |
| hwAlarmEthernetPeerPortNoNeg Alarm description: peer port does not support auto-negotiation.
Explanation: this port is auto-negotiation alarm, while the peer port is non-auto-negotiation alarm.
Resolution: Mo… | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.2 |
| hwAlarmOpticalPortRecoverFromLOS This trap is sent when the Ethernet optical port recovers from LOS. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.20 |
| hwAlarmLinkBetweenStackPortsRecover This trap is sent when the link between stack ports on the boards to be bound returns to a normal status. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.21 |
| hwOpticsTxPowerOutOfRangeAlarmTrap This trap is sent when the Tx power of the Ethernet optical port is out of the range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.22 |
| hwOpticsTxPowerRestoreAlarmTrap This trap is sent when the Tx power of the Ethernet optical port recovers to the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.23 |
| hwOpticsRxPowerOutOfRangeAlarmTrap This trap is sent when the Rx power of the Ethernet optical port is out of the range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.24 |
| hwOpticsRxPowerRestoreAlarmTrap This trap is sent when the Rx power of the Ethernet optical port recovers to the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.25 |
| hwAlarmEthPoePowerHighFault This trap is sent when the load power of the Power over Ethernet port exceeds the upper limit. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.26 |
| hwAlarmEthPoePowerHighRecover This trap is sent when the load power of the Power over Ethernet port recovers. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.27 |
| hwAlarmEthPoeCurrHighFault This trap is sent when the Overcurrent for the power supply of the Power over Ethernet port. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.28 |
| hwAlarmEthPoeCurrHighRecover This trap is sent when the Overcurrent for the power supply of the Power over Ethernet port recovers. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.29 |
| hwAlarmEthernetMacLost Alarm description: MAC is lost
explanation: The user MAC connected with IP DSLAM is lost.
Resolution: Adjust the max MAC learning of PVC.
Because in the connection with IP DSLAM, … | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.3 |
| hwAlarmEthernetPortAdminActivate This trap is sent when the ETH port is activated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.30 |
| hwAlarmEthernetPortAdminDeActivate This trap is sent when the ETH port is deactivated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.31 |
| hwAlarmEthPowerDyingGaspFault This trap is sent when the remote device is powered off. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.32 |
| hwAlarmEthPowerDyingGaspRecover This trap is sent when the remote device is powered on. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.33 |
| hwOpticsTemperatureOutOfRangeAlarmTrap This trap is sent when the Temperature of the Ethernet optical port is out of the range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.34 |
| hwOpticsTemperatureRestoreAlarmTrap This trap is sent when the Temperature of the Ethernet optical port recovers to the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.35 |
| hwOpticsVoltageOutOfRangeAlarmTrap This trap is sent when the Voltage of the Ethernet optical port is out of the range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.36 |
| hwOpticsVoltageRestoreAlarmTrap This trap is sent when the Voltage of the Ethernet optical port recovers to the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.37 |
| hwOpticsCurrentOutOfRangeAlarmTrap This trap is sent when the Current of the Ethernet optical port is out of the range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.38 |
| hwOpticsCurrentRestoreAlarmTrap This trap is sent when the Current of the Ethernet optical port recovers to the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.39 |
| hwAlarmEthernetPortActive This trap is sent when the LAN port has been actived from other state.
alarm description: port active
explanation: LAN port active
resolving method:No process to need | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.4 |
| hwEthPerformanceStatisOutOfRangeAlarmTrap This trap is sent when the Current alarm performance statistics of the Ethernet port is out of the range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.40 |
| hwEthPerformanceStatisRestoreAlarmTrap This trap is sent when the Current alarm performance statistics of the Ethernet port recovers to the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.41 |
| hwEthPerformanceStatisOutOfRangeWarningTrap This trap is sent when the Current warning performance statistics of the Ethernet port is out of the range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.42 |
| hwEthPerformanceStatisRestoreWarningTrap This trap is sent when the Current warning performance statistics of the Ethernet port recovers to the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.43 |
| hwMacOverloadTrap This trap is sent when the MAC address occupancy in the system exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.44 |
| hwMacOverloadRestoreTrap This trap is sent when the MAC address occupancy in the system is lower than the lower threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.45 |
| hwIPNeighbourHardwareOverloadTrap This trap is sent when the IP neighbour hardware occupancy in the system exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.46 |
| hwIPNeighbourHardwareOverloadRestoreTrap This trap is sent when the IP neighbour hardware occupancy in the system is lower than the lower threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.47 |
| hwBindBoardReplaceErrorTrap This trap is sent when one bind board has been replaced while the other one hasn't been replaced. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.48 |
| hwEnableMirrorPortTrap This trap is sent when a mirror port has been created.
1: hwFrameIndex -indicates the source frame index.
2: hwSlotIndex -indicates the source slot index.
3: hwPortIndex -indicate… | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.49 |
| hwAlarmEthernetPortDeActive This trap is sent when the lan port has been deactivated from other state.
alarm description: port deactivated
explanation: LAN port deactivated
resolving method:check port statu… | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.5 |
| hwDisableMirrorPortTrap This trap is sent when a mirror port has been cancelled.
1: hwFrameIndex -indicates the source frame index.
2: hwSlotIndex -indicates the source slot index.
3: hwPortIndex -indica… | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.50 |
| hwBoardMacOverloadTrap This trap is sent when the MAC address occupancy on the board exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.51 |
| hwBoardMacOverloadRestoreTrap This trap is sent when the MAC address occupancy on the board is lower than the lower threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.52 |
| hwEnableMirrorPortExtendTrap This trap is sent when mirroring is configured by running the mirror port command in SU mode.
1: hwMirrorSrcPortDescription -indicates the description of the source port with the … | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.53 |
| hwDisableMirrorPortExtendTrap This trap is sent when mirroring is canceled by running the undo mirror port command in SU mode.
1: hwMirrorSrcPortDescription -indicates the description of the source port with t… | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.54 |
| hwOpticsLaserTemperatureOutOfRangeAlarmTrap This trap is sent when the temperature of the Ethernet optical port laser is out of the range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.55 |
| hwOpticsLaserTemperatureRestoreAlarmTrap This trap is sent when the temperature of the Ethernet optical port laser recovers within the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.56 |
| hwOpticsWavelengthOutOfRangeAlarmTrap This trap is sent when the wavelength sent by the optical module on the Ethernet port is out of the range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.57 |
| hwOpticsWavelengthRestoreAlarmTrap This trap is sent when the wavelength sent by the optical module on the Ethernet port recovers within the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.58 |
| hwOpticTecCurrentOutOfRangeAlarmTrap This trap is sent when the current of the thermoelectric cooler on the Ethernet optical port is out of the range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.59 |
| hwMacConflictTrap When the source MAC got by non-network-side ports is the same as one learned by network-side ports,
this trap will be generated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.6 |
| hwOpticsTecCurrentRestoreAlarmTrap This trap is sent when the current of the thermoelectric cooler on the Ethernet optical port recovers within the normal range. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.60 |
| hwIPRouteHardwareOverloadTrap This trap is sent when the IP route hardware occupancy in the system exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.61 |
| hwIPRouteHardwareOverloadRestoreTrap This trap is sent when the IP route hardware occupancy in the system is lower than the lower threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.62 |
| hwPortAutoServiceAddFailureTrap Trap indicating that automatic service port creation upon an ONT being online fails. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.63 |
| hwPortAutoServiceParaIncorrectTrap Trap indicating that parameters for automatic service port creation are incorrect. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.64 |
| hwPortCmtsFrameAddFailTrap This trap is sent when board resources are full and the extended frame cannot be added. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.65 |
| hwMacConflictNewTrap When the source MAC got by a port is the same as one learnt by another, this trap will be generated.
When the port is configured with PW, hwExtSrvFlowIndex indicates PW index, and… | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.66 |
| hwMacAddressFlappingOverTrap When the number of flapping MAC addresses reaches or exceeds the preset upper threshold, this trap will be generated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.67 |
| hwMacAddressFlappingOverRestoreTrap When the number of flapping MAC addresses is smaller than or equal to the preset lower threshold, this trap will be generated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.68 |
| hwMacLimitOverflowTrap When the number of learnable MAC addresses of this port reaches the limit, this trap will be generated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.69 |
| hwAlarmEthernetPortTransceiverTypeChange This trap is sent when the transceiver type of the Ethernet port changes. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.7 |
| hwMacLimitOverflowRecoverTrap When the number of learnable MAC addresses of this port recovery normal, this trap will be generated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.70 |
| hwUpstreamDecreaseRecordTrap When the number of reduced upstream traffic by the specified uplink-port exceeds the
specified threshold, this trap will be generated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.71 |
| hwDownstreamDecreaseRecordTrap When the number of reduced downstream traffic by the specified uplink-port exceeds the
specified threshold, this trap will be generated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.72 |
| hwStreamDecreaseRecordTrap When the number of reduced upstream and downstream traffic by the specified uplink-port exceeds the
specified threshold, this trap will be generated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.73 |
| hwPacketAttackTrap The system records packet statistics based on port and protocol type when the current CPU usage exceeds the packet detection threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.74 |
| hwInnerForwardingFaultAlarmTrap When the inner forwarding fault occurs, this trap will be generated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.75 |
| hwInnerForwardingRecoverAlarmTrap When the inner forwarding recovery occurs, this trap will be generated. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.76 |
| hwDslamNonUnicastUpportMonitorRecordTrap The SNMP trap is generated when the number of non-unicast packets received by the uplink-port exceeds the threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.77 |
| hwIPTunnelHardwareOverloadTrap This trap is sent when the IP tunnel hardware occupancy in the system exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.78 |
| hwIPTunnelHardwareOverloadRestoreTrap This trap is sent when the IP tunnel hardware occupancy in the system is lower than the lower threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.79 |
| hwAlarmSoftwareVersionNotSame Software versions of the boards to be bound are not the same.
The parameter information about the trap location where the
trap message is generated, The first hwSlotIndex indicat… | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.8 |
| hwVPNHardwareOverloadTrap This trap is sent when the VNI peer hardware occupancy in the system exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.80 |
| hwVPNHardwareOverloadRestoreTrap This trap is sent when the VNI peer hardware occupancy in the system is lower than the lower threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.81 |
| hwSRv6TunnelHardwareOverloadRestoreTrap This trap is sent when the segment-routing ipv6 tunnel hardware occupancy in the system is lower than the lower threshold. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.83 |
| hwAlarmUpstreamPortConnectfail This trap is sent when the upstream ethernet port connection fails or the state of it is abnormal. | notification | - | .1.3.6.1.4.1.2011.5.14.10.2.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| HUAWEI-DEVICE-MIBhwFrameIndex The index of a shelf in the device. | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.1.1.1 |
| HUAWEI-DEVICE-MIBhwSlotIndex A slot index is used to identify the location of a board in a shelf.
You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex.
For the hwFrameIndex object, refe… | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.1 |
| hwResourceOverloadAwareUpperThreshold Indicates the upper threshold of the resource overload awareness. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.30.1.3 |
| hwResourceOverloadAwareLowerThreshold Indicates the lower threshold of the resource overload awareness. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.30.1.4 |
| hwResourceOverloadAwareCurValue Indicates the current resource occupancy. | scalar | OctetString | .1.3.6.1.4.1.2011.5.14.10.0.1.15 |