hwQueueGroupShapingTable
HUAWEI-ETHERLIKE-EXT-MIB ·
.1.3.6.1.4.1.2011.5.14.3.15
Object
table
Indicates a traffic shaping table, which is used to perform traffic shaping on certain queues on a port.
The system currently supports traffic shaping on only queues 3 and 4 and at the same time PQ scheduling
is applied invariably between them.
The indexes of this table are ifIndex and hwQueueGroup.
ifIndex indicates the index of F/S/P on which traffic shaping is performed.
hwQueueGroup indicates a queue group on which traffic shaping is performed.
This parameter has 32 bits and each bit represents a queue.
To perform traffic shaping on a queue group, you just need to adjust bits to 1.
The system currently supports up to eight queues. Traffic shaping, however, is performed only on queues 3 and 4.
Hence, the index is variably 00000000 00000000 00000000 00011000 (in binary), that is, 0x18 (in hexadecimal notation).
Context
- MIB
- HUAWEI-ETHERLIKE-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.14.3.15- Type
- table
- Status
- current
- Parent
- hwExtIpdslam
- Siblings
- 65
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIpdslamConnectTable Indicates the table that contains certain extended attributes of a service flow.
The index of this table is hwIpdslamConnectIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.1 |
| hwCosPortTrafficTable Indicates the port+CoS CAR table. It is used to add, query, modify, or delete the IP traffic
profile used by the port+CoS CAR. The indexes of this table are ifIndex, hwCosPortExt… | table | - | .1.3.6.1.4.1.2011.5.14.3.10 |
| hwIsCtrlPacket2CPU Indicates the switch for transmitting control packets to the CPU
when the maximum number of learnable dynamic MAC addresses is set to 0.
Options:
1. enable(1) -indicates that … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.3.11 |
| hwIpTrafficIndexNext This object contains an appropriate value to be used for hwIpTrafficIndex
when creating entries are being created in the hwIpTrafficParamTable.
The value 0 indicates that no una… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.3.12 |
| hwCosWREDThresholdTable | node | - | .1.3.6.1.4.1.2011.5.14.3.13 |
| hwCarThresholdTable | node | - | .1.3.6.1.4.1.2011.5.14.3.14 |
| hwEarlyDropMode Sets the global early drop mode of the system.
Options:
1. priBase(1) -indicating priority-based early drop
2. colorBase(2) -indicating color-based early drop
3. off(3) -… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.3.16 |
| hwPortVlanPolicingTable Indicates the port+VLAN CAR table. It is used to add, query, modify, or delete the IP traffic profile used by the port+VLAN CAR.
The indexes of this table are ifIndex and hwPortV… | table | - | .1.3.6.1.4.1.2011.5.14.3.17 |
| hwPbitsToPbitsMappingTable Indicates the service port priority mapping profile.
It is used to modify and query the service port mapping relationships.
The index of this table is hwPbitsToPbitsMappingIndex. … | table | - | .1.3.6.1.4.1.2011.5.14.3.18 |
| hwFlowPriorityCarTagMode Used to modify or query the tag priority mode of the system.
Options:
1. externalFirst(1) -Indicates the external tag First.
2. internalFirst(2) -Indicates the internal … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.3.19 |
| hwIpdslamBindIpTable Used for binding an IP address to a service port. To statically configure the permitted IP address of
a service port, use this table.
After the IP address is bound to a service p… | table | - | .1.3.6.1.4.1.2011.5.14.3.2 |
| hwBoardvlanrangestateTable Indicates VLAN RANGE flow feature.
The indexes of this table are hwFrameIndex and hwSlotIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.20 |
| hwXponCarportColorSensitive Used to enable or disable the xPON color perception.
Options:
1. enable(1) -the xPON color perception is enable
2. disable(2) -the xPON color perception is disable
Default: di… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.3.21 |
| hwQueueStatisticsstateTable Learns about the packet pass-through or drop status of a specified queue on a downstream port.
After a packet is sent downstream, the statistics of pass-through packets are incre… | table | - | .1.3.6.1.4.1.2011.5.14.3.22 |
| hwCarGroupTable Indicates the service port CAR group table. It is used to add, modify, query, or delete a service port CAR group.
The index of this table is hwCarGroupIndex. When adding a servic… | table | - | .1.3.6.1.4.1.2011.5.14.3.23 |
| hwCarGroupSrvFlowTable Indicates the member table of a service port CAR group. It is used to add, query, or delete a member from
a service port group. The indexes of this table are hwCarGroupMemberInde… | table | - | .1.3.6.1.4.1.2011.5.14.3.24 |
| hwDscpToPbitsMappingTable Indicates the DSCP-to-802.1p priority mapping profile.
It is used to modify and query the DSCP-to-802.1p priority mapping relationships in the system.
The index of this table is h… | table | - | .1.3.6.1.4.1.2011.5.14.3.26 |
| hwWREDTable Configures or queries a WRED profile.
The index of this table is hwWREDIndex.
During the creation of a WRED profile, if hwWREDIndex is specified to -1,
it indicates that the inde… | table | - | .1.3.6.1.4.1.2011.5.14.3.27 |
| hwQueueWREDTable Describes the binding between queues and a WRED profile.
The index of hwQueueWREDTable is hwQueueWREDId. hwQueueWREDId indicates a specified queue ID.
Range: 1-8
Before binding/un… | table | - | .1.3.6.1.4.1.2011.5.14.3.28 |
| hwIPPrecToPbitsMappingTable Indicates the IP precedence to pbits mapping table. This table is used to configure or query the mapping
between the IP precedence and pbits. It only supports the modify operatio… | table | - | .1.3.6.1.4.1.2011.5.14.3.29 |
| hwIpdslamBindMacTable Indicates MAC address binding feature.
The indexes of this table are hwIpdslamBindMacConnectIndex and hwIpdslamBindMacSubIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.3 |
| hwPortCarModeTable Used to query and modify the port CAR mode.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.30 |
| hwCosRemarkMask As an independent leaf node, describes the mapping between CoS and remarked CoS.
The remarked CoS ID is 0-7. Every four bits represents the CoS ID to which a Cos corre… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.14.3.31 |
| hwTagTransformTable Used to enable or disable the ability of the tag-transformation.
The indexes of this table are hwFrameIndex and hwSlotIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.32 |
| hwBoardMacLearningControlTable Used to enable or disable the board MAC learning ability in each specified VLAN.
The indexes of this table are hwFrameIndex and hwSlotIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.33 |
| hwCosQueueDepthRateSlotTable Sets the depth of queue in the board.
The indexes of this table are hwFrameIndex and hwSlotIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.34 |
| hwEarlyDropModeSlotTable Sets the early drop mode of the board.
The indexes of this table are hwFrameIndex and hwSlotIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.35 |
| hwEarlyDropColorBasedYellowThresholdTable | node | - | .1.3.6.1.4.1.2011.5.14.3.36 |
| hwCosGroupTblTable The index of this table is hwCosGroupTblIndex.
This table describes the relationship between the CoS entry in the CoS-group table and the group of the entry.
It supports the query… | table | - | .1.3.6.1.4.1.2011.5.14.3.37 |
| hwCarPortCosGroupTable This table is used to set, delete, and query the CoS-group table bound to the GEM port. The traffic profile can be used to limit the rate for the CoS group only after the GEM port… | table | - | .1.3.6.1.4.1.2011.5.14.3.38 |
| hwXponQueueShapingTable Indicates XPON board queue shaping table.
It is used to add, query, modify, or delete the queue shaping on XPON board.
The indexes of this table are hwXponQueueShapingIfIndex, hw… | table | - | .1.3.6.1.4.1.2011.5.14.3.39 |
| hwIpdslamQryLocation | node | - | .1.3.6.1.4.1.2011.5.14.3.4 |
| hwEthQueueShapingTable Indicates etherner board queue shaping table.
It is used to add, query, modify, or delete the queue shaping on etherner board.
The indexes of this table are hwEthQueueShapingIfIn… | table | - | .1.3.6.1.4.1.2011.5.14.3.40 |
| hwTrafficTablePriorityMappingMode Indicates the traffic table prority mapping mode.
Options:
1. userTos(1) -indicates that the mapping mode is ToS to 802.1p.
2. userDscp(2) -indicates that the mapp… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.3.41 |
| hwMacAddressHashConfilictDetect Indicates the switch for MAC hash detect.
Options:
1. enable(1) -indicates the switch for MAC hash detect is enable
2. disable(2) -indicates the switch for MAC hash detect disa… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.3.42 |
| hwE2ECcTable Indicates end to end congestion control.
It is used to enable or disable the end to end (E2E) congestion control function on a board.
If the E2E congestion control function is en… | table | - | .1.3.6.1.4.1.2011.5.14.3.43 |
| hwCarThresholdProfileTable Indicates the car-threshold profile table.
It is used to add, query, modify, or delete the car-threshold profile.
The index of this table is hwCarThresholdProfileIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.44 |
| hwTrafficLimitOntMode Indicates the mode of ONT Traffic limit.
Options:
1. shaping(1) -indicates the mode of ONT Traffic limit is shaping
2. car(2) -indicates the mode of ONT Traffic limit is CAR
De… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.3.45 |
| hwQosPolicyProfileTable Describes the attributes of a QoS policy profile, used for adding or deleting
a QoS policy profile, or modifying the status of the attributes in an existing
QoS policy profile.
… | table | - | .1.3.6.1.4.1.2011.5.14.3.46 |
| hwPortBindQosPolicyProfileTable This table is used for binding or unbinding a QoS policy profile to one port.
The index of this table is ifIndex, hwPortBindQosPolicyProfileSecondIndex, hwPortBindQosPolicyProfile… | table | - | .1.3.6.1.4.1.2011.5.14.3.47 |
| hwMulticastQueuePriority Indicates the priority of multicast service queue. | scalar | Integer32 | .1.3.6.1.4.1.2011.5.14.3.48 |
| hwEarlyDropPriBaseMappingTable | node | - | .1.3.6.1.4.1.2011.5.14.3.49 |
| hwCosQueueMappingMask As an independent leaf node, describes the mapping between 802.1p priority and queue.
The queue ID is 0-7. Every four bits represents the queue ID to which an 802.1p p… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.14.3.5 |
| hwPortStatisticsExcludeMulticastQueueTable This table is used for setting exclude port multicase statistics queue ID.
The index of this table is hwFrameIndex, hwSlotIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.50 |
| hwXponPortJumboEnableTable Indicates the jumbo frames configuration table of a xPON port.
It is used for setting the jumbo frames of a xPON port.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.51 |
| hwDscpToDscpMappingTable Indicates the DSCP to DSCP mapping table. This table is used to configure or query the mapping
between the DSCP and DSCP. It only supports the modify operation but not the create… | table | - | .1.3.6.1.4.1.2011.5.14.3.52 |
| hwDscpColorToPbitsMappingTable Indicates the color-DSCP-to-802.1p priority mapping profile.It is used to modify and query
the color-DSCP-to-802.1p priority mapping relationships in the system.
The index of thi… | table | - | .1.3.6.1.4.1.2011.5.14.3.53 |
| hwOntBindQosPolicyProfileTable This table is used for binding or unbinding a QoS policy profile to the ONT.
The index of this table is ifIndex, hwOntBindQosPolicyProfileOntId. | table | - | .1.3.6.1.4.1.2011.5.14.3.54 |
| hwUplinkSwitchNotify | node | - | .1.3.6.1.4.1.2011.5.14.3.55 |
| hwOnuSwitchNotify | node | - | .1.3.6.1.4.1.2011.5.14.3.56 |
| hwIpTrafficNameToIndexTable Indicates the traffic profile name-traffic profile index mapping table.
The index of this table is hwIpTrafficName. | table | - | .1.3.6.1.4.1.2011.5.14.3.57 |
| hwQueueMaxBufferSizeTable Indicates the maximum depth of a port queue or ONT queue configured based on boards.
The indexes of this table are hwFrameIndex, hwSlotIndex, and hwQueueMaxBufferSizeType. | table | - | .1.3.6.1.4.1.2011.5.14.3.58 |
| hwRateProfileTable Indicates the rate profile.
It is used to add, query, modify, or delete an rate profile.
This table mainly involves configuring CAR parameters such as CIR, PIR,
CBS, and PBS.
… | table | - | .1.3.6.1.4.1.2011.5.14.3.59 |
| hwCosQueueSchedTable | node | - | .1.3.6.1.4.1.2011.5.14.3.6 |
| hwQueuePolicyProfileTable Indicates the queue policy profile table. It is used to add, modify, query, or delete a queue policy profile.
The index of this table is hwQueuePolicyProfileIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.60 |
| hwPriorityGroupProfileTable Indicates the priority group profile table. It is used to add, modify, query, or delete a priority group profile.
The index of this table is hwPriorityGroupProfileName. | table | - | .1.3.6.1.4.1.2011.5.14.3.61 |
| hwAutoDeleteUnusedProfileTable | node | - | .1.3.6.1.4.1.2011.5.14.3.62 |
| hwPriorityGroupCarStatTable Used for priority group car statistics collection.
Indicates the table that contains the configuration information of priority group car statistics. It is used to create, modify,
… | table | - | .1.3.6.1.4.1.2011.5.14.3.63 |
| hwTrafficInnerPriForceModify Indicates the enabling status of the inner priority marking mode of the traffic profile.
Options:
1. disable(1) -Indicates that the inner priority marking mode of the traffic pr… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.3.64 |
| hwShapingBurstSizeConfigMode Indicates the mode of shaping burst-size configuration mode.
Options:
1. auto(1) -indicates the shaping burst-size configuration mode is auto.
2. manual(2) -indicates the shap… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.3.65 |
| hwXponPortMtuTable Indicates the MTU configuration table of a xPON port.
It is used for setting the MTU of a xPON port.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.14.3.66 |
| hwQueuePerformanceStatsTable Indicates the information about packets passed or dropped by a queue on a port in a 15-minute or 24-hour statistical period and the information about passed bytes.
The indexes of … | table | - | .1.3.6.1.4.1.2011.5.14.3.67 |
| hwCosQueueDepthRateTable | node | - | .1.3.6.1.4.1.2011.5.14.3.7 |
| hwIpTrafficParamTable Indicates the IP traffic profile.
It is used to add, query, modify, or delete an IP traffic profile.
This table mainly involves configuring CAR parameters such as CIR, PIR,
CBS… | table | - | .1.3.6.1.4.1.2011.5.14.3.8 |
| hwBoardTrafficModeTable Indicates the CAR mode. It is used to modify and query the board CAR mode and does not support the
create or delete operation. Before the CAR mode of a board is modified, the boa… | table | - | .1.3.6.1.4.1.2011.5.14.3.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwQueueGroupShapingEntry Indicates a traffic shaping table, which is used to perform traffic shaping on certain queues on a port.
The system currently supports traffic shaping on only queues… | row | - | .1.3.6.1.4.1.2011.5.14.3.15.1 |