hwPortChangeState
HUAWEI-ETHERLIKE-EXT-MIB ·
.1.3.6.1.4.1.2011.5.14.10.0.1.5
Object
scalar
Enumeration
The state of the ETH port. Options: 1. up(1) -port state change to up from down 2. down(2) -port state change to down from up
Context
- MIB
- HUAWEI-ETHERLIKE-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.14.10.0.1.5- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- hwEthernetGeneralVarBindOids
- Siblings
- 29
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwBitsPortStateChangeType Options:
1. up(1) -port state change to up from down
2. down(2) -port state change to down from up | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.10.0.1.1 |
| hwSrvFlowBundleChangedBundleType The service virtual port bundle type.
Currently, only one type is supported, that is, byPbit(1),
which indicates that the service flow bundle is for L3 access,
and that the serv… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.10.0.1.10 |
| hwSrvFlowBatOperType The service virtual port bat operation type.
Options:
1. batdeleteflow(1) -indicates to batch deleting the service flow port
2. batdeleteflowdesc(2) … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.10.0.1.11 |
| hwSrvFlowBatOperPara The value of service virtual port parameter.
Currently, only the value of the parameter is supported, that is, the mac-address max-mac-count
of the service flow port. When the hw… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.10.0.1.12 |
| hwSrvFlowBatModiyNum The nueber of the service virtual port.
Currently, the max value of hwSrvFlowBatModiyNum is 256. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.10.0.1.13 |
| hwSrvFlowBatFlowIndexList Indicates the list of service flow indexes, each index in the list identifies a service flow uniquely.
Currently, the max length of the list is 1024, including 256 flow indexes. … | scalar | OctetString | .1.3.6.1.4.1.2011.5.14.10.0.1.14 |
| hwResourceOverloadAwareCurValue Indicates the current resource occupancy. | scalar | OctetString | .1.3.6.1.4.1.2011.5.14.10.0.1.15 |
| hwEthernetLoopbackTestResult Indicates the result of loopback test.
Options:
1. success(1) -indicates that the result of loopback test is successful.
2. fail(2) -indicates that the result of loopback test … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.10.0.1.16 |
| hwEthernetLoopbackTestTxFrames Indicates the number of transmitted frames. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.14.10.0.1.17 |
| hwEthernetLoopbackTestRxFrames Indicates the number of received frames. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.14.10.0.1.18 |
| hwEthernetLoopbackTestPacketLossRatio Indicates the ratio of packet loss.
Range: 0-100 | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.14.10.0.1.19 |
| hwBindResult The result of binding board.
0 means the result OK
1 means the result error | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.10.0.1.2 |
| hwEthernetMirrorDirection Indicates the direction of mirror.
Directions including egress, ingress and all are supported currently. | scalar | OctetString | .1.3.6.1.4.1.2011.5.14.10.0.1.20 |
| hwMirrorSrcPortDescription Indicates the description of the source port, with the format frameId/slotId/portid. | scalar | OctetString | .1.3.6.1.4.1.2011.5.14.10.0.1.21 |
| hwMirrorDstPortDescription Indicates the description of the destination port with the format frameId/slotId/portid or meth. | scalar | OctetString | .1.3.6.1.4.1.2011.5.14.10.0.1.22 |
| hwAutoServiceAddContent Contents for automatic service port creation upon an ONT being online. | scalar | OctetString | .1.3.6.1.4.1.2011.5.14.10.0.1.23 |
| hwAutoServiceProcResult Results for automatic service port creation upon an ONT being online. | scalar | OctetString | .1.3.6.1.4.1.2011.5.14.10.0.1.24 |
| hwMacAddressFlappingPortInfo Paras for MAC flapping. | scalar | OctetString | .1.3.6.1.4.1.2011.5.14.10.0.1.25 |
| hwFlappingMacAddress The flapping MAC address. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.14.10.0.1.26 |
| hwTrafficUpportMonitorUpstreamLast Last Upstream Traffic. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.10.0.1.27 |
| hwTrafficUpportMonitorUpstream Current Upstream Traffic. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.10.0.1.28 |
| hwTrafficUpportMonitorDownstreamLast Last Downstream Traffic. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.10.0.1.29 |
| hwBindOperateFlag The operate type of binding board.
1 means to create bind group
2 means to delete bind group
4 means to add bind group member
5 means to delete bind group member | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.10.0.1.3 |
| hwTrafficUpportMonitorDownstream Current Downstream Traffic. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.10.0.1.30 |
| hwPortSpeedType The switched speed type of port.
Options:
1. ge(1) -the switched speed type of port is ge
2. fe(2) -the switched speed type of port is fe
3. ge10(3) -the … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.10.0.1.4 |
| hwSrvOperType The operation type of the traffic stream.
Options:
1. add(1) -means to create a traffic stream.
2. modify(2) -means to modify a traffic stream (this operation is not supported… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.10.0.1.6 |
| hwSrvAttrChangeType It means to modify the mask corresponding to the traffic stream attribute.
Currently, multiple traffic stream attributes can be modified at a time.
The description for each BIT of… | scalar | Bits | .1.3.6.1.4.1.2011.5.14.10.0.1.7 |
| hwSrvFlowBundleChangedOperType The service virtual port bundle operate type.
Options:
1. add(1) -indicates add the service virtual port bundle
2. delete(2) -indicates delete the service virtual port bundle | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.10.0.1.8 |
| hwSrvFlowBundleChangedBundleStr The service virtual port bundle index. | scalar | OctetString | .1.3.6.1.4.1.2011.5.14.10.0.1.9 |