hwDocsQamNGODEdgeDeviceVREPIDMode
HUAWEI-EQAM-AN-MIB ·
.1.3.6.1.4.1.2011.6.187.11.1.8
Object
column
r/w
Enumeration
This attribute identifies the IP address type of the edge device to setup VREP session.. The default value is localip(1). Options: 1. localip(1) -indicates the localip mode. In this mode, edge device uses the hwDocsQamNGODEdgeDeviceLocalAddress as the VREPID in the VREP OPEN message. 2. integer(2) -indicates the integer mode. In this mode, edge device uses the manual configured VREPID which can be configured through hwDocsQamNGODEdgeDeviceVREPID as the VREPID in the VREP OPEN message.
Context
- MIB
- HUAWEI-EQAM-AN-MIB
- OID
.1.3.6.1.4.1.2011.6.187.11.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwDocsQamNGODEdgeDeviceEntry
- Table
- hwDocsQamNGODEdgeDeviceTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | localip |
2 | integer |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDocsQamNGODEdgeDeviceName This attribute is the key that identifies the instance of the edge device.
Suggested format <RegionName>.<localname>. | column | OctetString | .1.3.6.1.4.1.2011.6.187.11.1.1 |
| hwDocsQamNGODEdgeDeviceHoldTime This attribute identifies the number of seconds that the edge device proposes
for the value of the Hold Timer. Upon receipt of an OPEN message, a VREP speaker or
listener MUST cal… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.187.11.1.10 |
| hwDocsQamNGODEdgeDeviceConnectRetry This attribute identifies the expire time for the edge device to setup an TCP connection.
The exact value of the ConnectRetry timer is a local matter, but should be sufficiently … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.187.11.1.11 |
| hwDocsQamNGODEdgeDeviceActive This attribute identifies the state of the edge device.
Set ture to active the edge device and false to deactive.
The default value is false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.187.11.1.12 |
| hwDocsQamNGODEdgeDeviceState Indicates the state of the edge device VREP FSM.
Options:
1. idle(1) -Initially VREP is in the Idle state for each peer
2. connect(2) -In this state, an edge device i… | column | Enumeration | .1.3.6.1.4.1.2011.6.187.11.1.13 |
| hwDocsQamNGODEdgeDeviceNegotiatedHoldTime This attribute identifies the negotiated number of seconds that the edge device proposes
for the value of the Hold Timer. See hwDocsQamNGODEdgeDeviceHoldTime decription.
The defau… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.187.11.1.14 |
| hwDocsQamNGODEdgeDeviceEstablishedPeerAddressType This attribute identifies the IP address type of ERM peer which the edge device established a VREP session with. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.187.11.1.15 |
| hwDocsQamNGODEdgeDeviceEstablishedPeerAddress This attribute identifies the IP address of ERM peer which the edge device established a VREP session with.
When VREP session is not in established state, this value is 0.
The de… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.11.1.16 |
| hwDocsQamNGODEdgeDeviceEstablishedPeerPort This attribute identifies the TCP port number of ERM peer which the edge device established a VREP session with.
When VREP session is not in established state, this value is 0.
Th… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.6.187.11.1.17 |
| hwDocsQamNGODEdgeDeviceEstablishedLocalAddressType This attribute identifies the IP address type of the edge device established a VREP session. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.187.11.1.18 |
| hwDocsQamNGODEdgeDeviceEstablishedLocalAddress This attribute identifies the IP address of the edge device established a VREP session.
When VREP session is not in established state, this value is 0.
The default value is 0. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.11.1.19 |
| hwDocsQamNGODEdgeDeviceStreamingZone This attribute identifies the streaming zone name which the edge device belongs to.
Suggested format <RegionName>.<localname>.
Null string means that the edge device does not belo… | column | OctetString | .1.3.6.1.4.1.2011.6.187.11.1.2 |
| hwDocsQamNGODEdgeDeviceEstablishedLocalPort This attribute identifies the TCP port number of the edge device established a VREP session.
When VREP session is not in established state, this value is 0.
The default value is 0. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.6.187.11.1.20 |
| hwDocsQamNGODEdgeDeviceCost This attribute identifies the cost of the edge devie.
The cost attribute is a topology independent attribute.
It represents the relative cost associated with the resources from … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.187.11.1.21 |
| hwDocsQamNGODEdgeDevicelocalIfType Indicates the interface type.
Options:
1. inloopback(1) -the system inner loopback interface
2. null(2) -the NULL interface
3. meth(3) -the ethernet interface for mana… | column | Enumeration | .1.3.6.1.4.1.2011.6.187.11.1.22 |
| hwDocsQamNGODEdgeDevicelocalIfNumber Indicates the interface number.
Range: 0-4093
Range for the inloopback interface: 0
Range for the NULL interface: 0
Range for the MEth interface: 0
Range for the VLAN interface: 1… | column | Integer32 | .1.3.6.1.4.1.2011.6.187.11.1.23 |
| hwDocsQamNGODEdgeDeviceRowStatus Row status, used to query, create, modify, and delete a edge device.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.187.11.1.255 |
| hwDocsQamNGODEdgeDevicePeerAddressType This attribute identifies the IP address type of ERM peer which the edge device setting up VREP session with. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.187.11.1.3 |
| hwDocsQamNGODEdgeDevicePeerAddress This attribute identifies the IP address of ERM peer which the edge device setting up VREP session with. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.11.1.4 |
| hwDocsQamNGODEdgeDevicePeerPort This attribute identifies the TCP port number of ERM peer which the edge device setting up VREP session with.
The default port number is 6069. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.6.187.11.1.5 |
| hwDocsQamNGODEdgeDeviceLocalAddressType This attribute identifies the IP address type of the edge device to setup VREP session. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.187.11.1.6 |
| hwDocsQamNGODEdgeDeviceLocalAddress This attribute identifies the IP address of the edge device to setup VREP session. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.11.1.7 |
| hwDocsQamNGODEdgeDeviceVREPID This attribute identifies the VREPID value of the edge device.
The VREP Identifier MUST uniquely identify this speaker/listener within its Streaming Zone. A
given node MAY set th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.187.11.1.9 |