hwDocsQamNGODEdgeDeviceNegotiatedHoldTime
HUAWEI-EQAM-AN-MIB ·
.1.3.6.1.4.1.2011.6.187.11.1.14
Object
column
Unsigned32
This attribute identifies the negotiated number of seconds that the edge device proposes for the value of the Hold Timer. See hwDocsQamNGODEdgeDeviceHoldTime decription. The default value is 0. Unit: s.
Context
- MIB
- HUAWEI-EQAM-AN-MIB
- OID
.1.3.6.1.4.1.2011.6.187.11.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwDocsQamNGODEdgeDeviceEntry
- Table
- hwDocsQamNGODEdgeDeviceTable
- Siblings
- 23
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-0
range: 3-3600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDocsQamNGODEdgeDeviceName This attribute is the key that identifies the instance of the edge device.
Suggested format <RegionName>.<localname>. | column | OctetString | .1.3.6.1.4.1.2011.6.187.11.1.1 |
| hwDocsQamNGODEdgeDeviceHoldTime This attribute identifies the number of seconds that the edge device proposes
for the value of the Hold Timer. Upon receipt of an OPEN message, a VREP speaker or
listener MUST cal… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.187.11.1.10 |
| hwDocsQamNGODEdgeDeviceConnectRetry This attribute identifies the expire time for the edge device to setup an TCP connection.
The exact value of the ConnectRetry timer is a local matter, but should be sufficiently … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.187.11.1.11 |
| hwDocsQamNGODEdgeDeviceActive This attribute identifies the state of the edge device.
Set ture to active the edge device and false to deactive.
The default value is false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.187.11.1.12 |
| hwDocsQamNGODEdgeDeviceState Indicates the state of the edge device VREP FSM.
Options:
1. idle(1) -Initially VREP is in the Idle state for each peer
2. connect(2) -In this state, an edge device i… | column | Enumeration | .1.3.6.1.4.1.2011.6.187.11.1.13 |
| hwDocsQamNGODEdgeDeviceEstablishedPeerAddressType This attribute identifies the IP address type of ERM peer which the edge device established a VREP session with. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.187.11.1.15 |
| hwDocsQamNGODEdgeDeviceEstablishedPeerAddress This attribute identifies the IP address of ERM peer which the edge device established a VREP session with.
When VREP session is not in established state, this value is 0.
The de… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.11.1.16 |
| hwDocsQamNGODEdgeDeviceEstablishedPeerPort This attribute identifies the TCP port number of ERM peer which the edge device established a VREP session with.
When VREP session is not in established state, this value is 0.
Th… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.6.187.11.1.17 |
| hwDocsQamNGODEdgeDeviceEstablishedLocalAddressType This attribute identifies the IP address type of the edge device established a VREP session. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.187.11.1.18 |
| hwDocsQamNGODEdgeDeviceEstablishedLocalAddress This attribute identifies the IP address of the edge device established a VREP session.
When VREP session is not in established state, this value is 0.
The default value is 0. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.11.1.19 |
| hwDocsQamNGODEdgeDeviceStreamingZone This attribute identifies the streaming zone name which the edge device belongs to.
Suggested format <RegionName>.<localname>.
Null string means that the edge device does not belo… | column | OctetString | .1.3.6.1.4.1.2011.6.187.11.1.2 |
| hwDocsQamNGODEdgeDeviceEstablishedLocalPort This attribute identifies the TCP port number of the edge device established a VREP session.
When VREP session is not in established state, this value is 0.
The default value is 0. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.6.187.11.1.20 |
| hwDocsQamNGODEdgeDeviceCost This attribute identifies the cost of the edge devie.
The cost attribute is a topology independent attribute.
It represents the relative cost associated with the resources from … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.187.11.1.21 |
| hwDocsQamNGODEdgeDevicelocalIfType Indicates the interface type.
Options:
1. inloopback(1) -the system inner loopback interface
2. null(2) -the NULL interface
3. meth(3) -the ethernet interface for mana… | column | Enumeration | .1.3.6.1.4.1.2011.6.187.11.1.22 |
| hwDocsQamNGODEdgeDevicelocalIfNumber Indicates the interface number.
Range: 0-4093
Range for the inloopback interface: 0
Range for the NULL interface: 0
Range for the MEth interface: 0
Range for the VLAN interface: 1… | column | Integer32 | .1.3.6.1.4.1.2011.6.187.11.1.23 |
| hwDocsQamNGODEdgeDeviceRowStatus Row status, used to query, create, modify, and delete a edge device.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.187.11.1.255 |
| hwDocsQamNGODEdgeDevicePeerAddressType This attribute identifies the IP address type of ERM peer which the edge device setting up VREP session with. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.187.11.1.3 |
| hwDocsQamNGODEdgeDevicePeerAddress This attribute identifies the IP address of ERM peer which the edge device setting up VREP session with. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.11.1.4 |
| hwDocsQamNGODEdgeDevicePeerPort This attribute identifies the TCP port number of ERM peer which the edge device setting up VREP session with.
The default port number is 6069. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.6.187.11.1.5 |
| hwDocsQamNGODEdgeDeviceLocalAddressType This attribute identifies the IP address type of the edge device to setup VREP session. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.187.11.1.6 |
| hwDocsQamNGODEdgeDeviceLocalAddress This attribute identifies the IP address of the edge device to setup VREP session. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.11.1.7 |
| hwDocsQamNGODEdgeDeviceVREPIDMode This attribute identifies the IP address type of the edge device to setup VREP session..
The default value is localip(1).
Options:
1. localip(1) -indicates the localip mode. I… | column | Enumeration | .1.3.6.1.4.1.2011.6.187.11.1.8 |
| hwDocsQamNGODEdgeDeviceVREPID This attribute identifies the VREPID value of the edge device.
The VREP Identifier MUST uniquely identify this speaker/listener within its Streaming Zone. A
given node MAY set th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.187.11.1.9 |