hwDocsQamInputTSDefaultSwitchoverTriggers
HUAWEI-EQAM-AN-MIB ·
.1.3.6.1.4.1.2011.6.187.1.12
Object
scalar
r/w
Bits
Indicates the default trigger conditions for protection switching on input TSs. The format is 4 bits. A bit of this attribute is set to 1 if the parameter indicated by the comment was present in the protection switching, and to 0 otherwise. None of the trigger bit is set by default. Bit 0 -indicates that the trigger condition is no-bitrate. Bit 1 -indicates that the trigger condition is no-signal. Bit 2 -indicates that the trigger condition is pat-missing. Bit 3 -indicates that the trigger condition is pmt-missing.
Context
- MIB
- HUAWEI-EQAM-AN-MIB
- OID
.1.3.6.1.4.1.2011.6.187.1.12- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwDocsQamVideoGlobalConfigObject
- Siblings
- 17
Syntax
Bits
Values & Constraints
Enumerated Values
0 | nobitrate |
1 | nosignal |
2 | patmissing |
3 | pmtmissing |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDocsQamVideoTimeOutInterval Indicates the video timeout interval.
Default: 60 | scalar | second Integer32 | .1.3.6.1.4.1.2011.6.187.1.1 |
| hwDocsQamGratuitousArpPeriodSendMode Indicates the gratuitous ARP period send mode, the default value is disabled(2).
Options:
1. enabled(1) -indicates the gratuitous ARP period send mode is enabled
2. disabled… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.187.1.10 |
| hwDocsQamDVBProcessFrameSlot Indicates the frame ID and slot ID of the DVB service processing board.
The most significant 16 bits indicate the frame ID while the least significant 16 bits indicate the slot I… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.11 |
| hwDocsQamInputTSStatisticsClearAll Clears all the input TS statistics.
Options:
1. clearStatistic(1) -Clears all the input TS statistics
The default value is clearStatistic(1). | scalar | Enumeration | .1.3.6.1.4.1.2011.6.187.1.13 |
| hwDocsQamVideoProgramNumberTotalGlobal Indicates the number of global VOD programs. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.14 |
| hwDocsQamVideoProgramNumberOnlineGlobal Indicates the number of global online VOD programs. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.15 |
| hwDocsQamDVBChannelMonitoringProbeDuration Indicates the duration of DVB channel monitoring.
The default value is 60. | scalar | second Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.16 |
| hwDocsQamDVBInputTsTimeOut Indicates the timeout interval of input TSs .
The default value is 5. | scalar | second Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.17 |
| hwDocsQamVideoFrequncyOffsetCorrectionFactor Indicates the frequency offset correction factor.
The default value is 2. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.187.1.18 |
| hwDocsQamVODProcessFrameSlot Indicates the frame ID and slot ID of the VOD service processing board.
The most significant 16 bits indicate the frame ID while the least significant 16 bits indicate the slot I… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.19 |
| hwDocsQamAutoConfigIppoolAddressType Indicates the address type of the address pool. Only IPv4 addresses are supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.187.1.2 |
| hwDocsQamAutoConfigIppoolStartAddress Indicates the start address of the address pool.
To delete an IP address pool, bind hwDocsQamAutoConfigIppoolStartAddress and hwDocsQamAutoConfigIppoolEndAddress together and set… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.1.3 |
| hwDocsQamAutoConfigIppoolEndAddress Indicates the end address of the address pool.
To delete an IP address pool, bind hwDocsQamAutoConfigIppoolStartAddress and hwDocsQamAutoConfigIppoolEndAddress together and set th… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.1.4 |
| hwDocsQamAutoConfigIppoolVlanId Indicates the VLAN ID of the video domain. The default value is -1, indicating that the VLAN ID is invalid. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.187.1.5 |
| hwDocsQamAutoConfigVideoProfile Automatically pre-configures the name of the video profile. | scalar | OctetString | .1.3.6.1.4.1.2011.6.187.1.6 |
| hwDocsQamMulticastVlanId Indicates the multicast VLAN ID of the video service. The default value is -1, indicating that the multicast VLAN ID is invalid. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.187.1.8 |
| hwDocsQamSecondaryMulticastVlanId Indicates the secondary multicast VLAN ID. The default value is -1, indicating that the multicast VLAN ID is invalid. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.187.1.9 |