hwDocsQamAutoConfigIppoolEndAddress
HUAWEI-EQAM-AN-MIB ·
.1.3.6.1.4.1.2011.6.187.1.4
Object
Indicates the end address of the address pool. To delete an IP address pool, bind hwDocsQamAutoConfigIppoolStartAddress and hwDocsQamAutoConfigIppoolEndAddress together and set their values to 0xff 0xff 0xff 0xff. The value of hwDocsQamAutoConfigIppoolStartAddress or hwDocsQamAutoConfigIppoolEndAddress must be set to a valid unicast IP address in other scenarios.
Context
- MIB
- HUAWEI-EQAM-AN-MIB
- OID
.1.3.6.1.4.1.2011.6.187.1.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwDocsQamVideoGlobalConfigObject
- Siblings
- 17
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDocsQamVideoTimeOutInterval Indicates the video timeout interval.
Default: 60 | scalar | second Integer32 | .1.3.6.1.4.1.2011.6.187.1.1 |
| hwDocsQamGratuitousArpPeriodSendMode Indicates the gratuitous ARP period send mode, the default value is disabled(2).
Options:
1. enabled(1) -indicates the gratuitous ARP period send mode is enabled
2. disabled… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.187.1.10 |
| hwDocsQamDVBProcessFrameSlot Indicates the frame ID and slot ID of the DVB service processing board.
The most significant 16 bits indicate the frame ID while the least significant 16 bits indicate the slot I… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.11 |
| hwDocsQamInputTSDefaultSwitchoverTriggers Indicates the default trigger conditions for protection switching on input TSs. The format is 4 bits.
A bit of this attribute is set to 1 if the parameter indicated by the commen… | scalar | Bits | .1.3.6.1.4.1.2011.6.187.1.12 |
| hwDocsQamInputTSStatisticsClearAll Clears all the input TS statistics.
Options:
1. clearStatistic(1) -Clears all the input TS statistics
The default value is clearStatistic(1). | scalar | Enumeration | .1.3.6.1.4.1.2011.6.187.1.13 |
| hwDocsQamVideoProgramNumberTotalGlobal Indicates the number of global VOD programs. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.14 |
| hwDocsQamVideoProgramNumberOnlineGlobal Indicates the number of global online VOD programs. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.15 |
| hwDocsQamDVBChannelMonitoringProbeDuration Indicates the duration of DVB channel monitoring.
The default value is 60. | scalar | second Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.16 |
| hwDocsQamDVBInputTsTimeOut Indicates the timeout interval of input TSs .
The default value is 5. | scalar | second Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.17 |
| hwDocsQamVideoFrequncyOffsetCorrectionFactor Indicates the frequency offset correction factor.
The default value is 2. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.187.1.18 |
| hwDocsQamVODProcessFrameSlot Indicates the frame ID and slot ID of the VOD service processing board.
The most significant 16 bits indicate the frame ID while the least significant 16 bits indicate the slot I… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.187.1.19 |
| hwDocsQamAutoConfigIppoolAddressType Indicates the address type of the address pool. Only IPv4 addresses are supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.187.1.2 |
| hwDocsQamAutoConfigIppoolStartAddress Indicates the start address of the address pool.
To delete an IP address pool, bind hwDocsQamAutoConfigIppoolStartAddress and hwDocsQamAutoConfigIppoolEndAddress together and set… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.187.1.3 |
| hwDocsQamAutoConfigIppoolVlanId Indicates the VLAN ID of the video domain. The default value is -1, indicating that the VLAN ID is invalid. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.187.1.5 |
| hwDocsQamAutoConfigVideoProfile Automatically pre-configures the name of the video profile. | scalar | OctetString | .1.3.6.1.4.1.2011.6.187.1.6 |
| hwDocsQamMulticastVlanId Indicates the multicast VLAN ID of the video service. The default value is -1, indicating that the multicast VLAN ID is invalid. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.187.1.8 |
| hwDocsQamSecondaryMulticastVlanId Indicates the secondary multicast VLAN ID. The default value is -1, indicating that the multicast VLAN ID is invalid. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.187.1.9 |