hwEntDspRtpPacketInterval

HUAWEI-ENT-VOICE-COMMON-MIB · .1.3.6.1.4.1.2011.5.25.253.5.5
MIB view Table view

Object

scalar r/w Enumeration 
Indicates the default RTP packet time of DSP channel.
Options:
1. pt5ms(1)  
2. pt10ms(2)
3. pt20ms(3)
4. pt30ms(4)
Default: pt20ms(3)

Context

MIB
HUAWEI-ENT-VOICE-COMMON-MIB
OID
.1.3.6.1.4.1.2011.5.25.253.5.5
Type
scalar
Access
readwrite
Status
current
Parent
hwEntDspAttributeTable
Siblings
29

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwEntDspFaxMaxTrainRate
Indicates the maximum fax training rate. Options: v17(1) v29(2) v27(3) Default: v17(1)
scalarEnumeration.1.3.6.1.4.1.2011.5.25.253.5.1
hwEntDspBvqm
Indicates the VQM switch. Options: enable(1) disable(2) Default: disable(2)
scalarEnumeration.1.3.6.1.4.1.2011.5.25.253.5.10
hwEntDspPlc
Indicates the DSP packet loss compensation algorithm. Options: enable(1) disable(2) Default: disable(2)
scalarEnumeration.1.3.6.1.4.1.2011.5.25.253.5.11
hwEntDspMinAdaptJitterBuffer
Minimum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer. Default: 2 Unit: ms
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.12
hwEntDspMaxAdaptJitterBuffer
Maximum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer. Default: 135 Unit: ms
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.13
hwEntDspInitAdaptJitterBuffer
Initial adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer. Default: 2 Unit: ms
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.14
hwEntDspMinFixedJitterBuffer
Minimum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer. Default: 2 Unit: ms
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.15
hwEntDspMaxFixedJitterBuffer
Maximum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer. Default: 135 Unit: ms
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.16
hwEntDspNormalFixedJitterBuffer
Initial fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer. Default: 60 Unit: ms
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.17
hwEntDspRedundancyPayload
Indicates the payload type value of redundancy (it must not conflict with the payload used). Default: 96
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.18
hwEntDspRedundancyT30
Indicates the T30 redundancy parameter of T38 Fax. Default: 3
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.19
hwEntDspFaxTrainMode
Indicates the fax training mode. Options: e2e(1) local(2) Default: e2e(1)
scalarEnumeration.1.3.6.1.4.1.2011.5.25.253.5.2
hwEntDspRedundancyT4
Indicates the T4 redundancy parameter of T38 Fax. Default: 3
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.20
hwEntDspFaxV8Negotiate
Indicates the switch of the V8 negotiation of FAX. Options: enable(1) disable(2) Default: disable(2)
scalarEnumeration.1.3.6.1.4.1.2011.5.25.253.5.21
hwEntDspRTCPXR
The switch of RTCP XR. Options: enable(1) -enable RTCP XR disable(2) -disable RTCP XR Default: enable(1)
scalarEnumeration.1.3.6.1.4.1.2011.5.25.253.5.22
hwEntDspVbdPayload
Indicates the payload type value of VBD (it must not conflict with the payload used). Default: 102
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.23
hwEntDspRfcNtePayload
Indicates the payload type value of nte (it must not conflict with the payload used). Default: 97
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.24
hwEntDspG726R16kPayload
Indicates the payload type value of G.726-16k (it must not conflict with the payload used). Default: 103
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.25
hwEntDspG726R24kPayload
Indicates the payload type value of G.726-24k (it must not conflict with the payload used). Default: 104
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.26
hwEntDspG726R32kPayload
Indicates the payload type value of G.726-32k (it must not conflict with the payload used). Default: 101
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.27
hwEntDspG726R40kPayload
Indicates the payload type value of G.726-40k (it must not conflict with the payload used). Default: 105
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.28
hwEntDspAutoVBDSwitchMode
VBD switch mode. Options: 1. hostControl(1) -host control 2. autoSwitch(2) -auto switch Default: hostControl(1)
scalarEnumeration.1.3.6.1.4.1.2011.5.25.253.5.29
hwEntDspCodeType
Indicates the default coding type of DSP channel. Options: g711A(1) g711u(2) g723(3) g729(4) g726by16k(5) g726by24k(6) g726by32k(7) g726by40k(8) Default: g711A(1)
scalarEnumeration.1.3.6.1.4.1.2011.5.25.253.5.3
hwEntDspAlarmAdaptJitterBuffer
Adapt jitterbuffer of DSP alarm threshold. Default: 150 Unit: ms
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.30
hwEntDspRtcpPackageSendInterval
Indicates the RTCP packet sending interval of DSP channel. The valid value must be no less than 500, 0 indicates that the parameter is disabled. Default: 5000 Unit: ms
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.4
hwEntDspEchoCheck
Indicates whether to enable echo check of DSP channel. Options: enable(1) disable(2) Default: enable(1)
scalarEnumeration.1.3.6.1.4.1.2011.5.25.253.5.6
hwEntDspSilenceReduce
Indicates whether to enable silence compression of DSP channel. Options: enable(1) disable(2) Default: disable(2)
scalarEnumeration.1.3.6.1.4.1.2011.5.25.253.5.7
hwEntDspClearmodePayload
Indicates the default payload type of the DSP channel clearmode (it must not conflict with the payload used). Default: 100
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.8
hwEntDspSevereDegradethreshold
Indicates the default threshold of severely packet loss seconds. Default: 400
scalarInteger32.1.3.6.1.4.1.2011.5.25.253.5.9